Search results for: '30841 lever operator for jeld we asement window'
- Related search terms
- window tentry good 30895 301
- window truth goods 30905 301
- window truth goods 30897 301
- window truth goods 30866 301
- window truth goods 31879 301
- window truth goods 30591 301
- window+tentry+good+30842 301
- window+truth+30851entry+good+31879 301
- window truth entry good 30897 301
- window tentry goods 31876 301
-
Truth 51.10 Encore Awning Operator
The Truth 51.10 Encore Awning Operator is used on windows that open from the bottom and swing out, like a one piece garage door. When in the closed position, the arms have an approximate length of 15 inches. The housing is constructed of die cast metal, and arms are steel. The complete assembly is electro statically painted. The operator ships with the 31879 detach clip, but does not include the 11647 Maxim Slide Shoe. The slide shoe is the piece that slides in the track at the bottom of the window. A common number we find on this operator is 41013.Wi5110 -
Fenestra Window Operator 4-1/4"
The Fenestra Window Operator 4-1/4" was used between 1930 to 1970. The operator features die cast metal construction with a steel arm. The original version was made of cast bronze, which in today's market would be cost prohibitive. This unit ships with handle and mounting screws.
Right Hand Operator shown in picture.
Handing Diagram
RO162 -
Fenestra Window Operator 3-1/4"
The Fenestra Window Operator 3-1/4" is a replica of a version made in the 1920's to 1950's. This version is made of a die cast material, that is then powder coated in an aluminum finish. If you want bronze color, your best bet is to purchase some bronze spray paint and paint them. Ships with mounting screws and handle.
Left hand shown in pictureHanding Diagram
RO727- -
Truth Split Arm Operator 15.26
Truth Split Arm Operator 15.26
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.
Left hand shown. White and Bronze only
Color Chart
Window Operator Handing
WI1526 -
Truth 11" Surface Mounted Operator
Truth 11" Surface Mounted Operator
This Truth Surface Mounted Window Operator is usually used on commercial aluminum windows. It features an 11" long arm, measured from the center of the housing to the center of the metal roller. The outside mounting screw holes are 4-3/4" a part and the inter screws are 3-7/8" on center.
Right Hand Shown, in Aluminum
Right Hand Aluminum Wi36223AL
Left Hand Aluminum Wi36222AL
Right Hand Bronze Wi36223BR
Left Hand Bronze Wi36222BR
Right Hand White Wi36223W
Left Hand White Wi36222WWi3622X -
Truth Skylight Operator-Angle Drive 42.65
The Truth Skylight Operator-Angle Drive 4265 is easy to install on wood, metal or vinyl skylights. Gear reduction provides needed lift for sash weights up to 140 lbs. Steel chain is detachable at the sash for easy maintenance. The housing measures 2-3/4" wide by 10-3/4" long with a thickness of 7/8". We find the number 40966 stamped on the back cover.
Wi4265- -
Truth Awning Operator 22.21
Truth Awning Operator 22.21
The arms stretch 21-1/2" across in the closed position. The housing is front side mounted with 4 screws. The spacing on the outside screws are 7" on center, and 6" on the inter screws.
The Wi11454 handle in matching color is included with the operator along with the Sash Hook Wi20008.
Color Chart
Wi2221- -
Truth Contour Window Crank 11454
Truth Contour Window Crank 11454
Truth 11454 Contour Handle. Will work with all Truth Operators manufactured after 1978. Features a snap on clip, so no tools are needed. We sometime find the number 45240 cast into the back of the handle.
11/32" spline
Tuth Part # 11454.xx were xx is the color
Color Chart
Wi11454 -
Split Arm Roto Operator
The Split Arm Roto Operator has been around for the past 10-15 years. The housing is 4-1/2" wide, and the linkage arm has an overall length of 4-3/8". One of the most recognizable features of this mechanism is the female hex fitting for the handle.
Right Hand shown in the picture
Wi21339- -
Casement Operator 9" Arm
Casement Window Operator 9" Arm
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 9" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
Ro267 Right Hand
Ro268 Left HandHanding Diagram
RO267-8 -
Truth 30568 Awning Operator Guide Bar
Awning Operator Guide Bar 30568
The Truth Operator Guide Bar measures 26-3/4" long with the two mounting holes at 26-1/8" on centers. The bar is constructed of extruded aluminum. The Wi10005 is the component that slides in this track. This track is mounted to the sash.
Truth Part # 30568
Wi30568 -
Maxim Dual Arm Operator-50.01 Low Profile
The Truth 50.01 Maxim Dual Arm is one of the more popular new style operators from Truth. They are only been around since 1999, but were discontinued in 2020. The Truth 50.11 is an exact replacement, and it ships with the 12614 or 12616 Encore Handle and Cover.
Common numbers sometimes found on this operator are 31876 and 41011.
>WI5001 -
-
Truth 11.12 Awning Operator 30896 31706
Truth 11.12 Awning Operator 30896 31706
Attaches to window on one point.
16-1/2" spread with in the closed positon.
Common number found on the operator is 30896 and 31706
The Wi11454 handle in matching color is included with the operator, along with the Wi20008 Sash Hook.
Color Chart
WI1112 -
4 Bar Window Hinge A.W. Anderberg 301AL
A.W. Anderberg 301AL 4 Bar Window HInge, aluminum construction.
29/32" width x 5/8" stack height
Found in commercial aluminum framed hopper windows.
10" and 12" only, if you have an older larger size, please use the A.W. Anderberg 301ST or A.W. Anderberg 301SS as a replacement. You might have to shim the tracks in these cases, because the stack height is lower on the steel and stainless steel hinges. A.W. Anderberg no longer makes the larger sizes of the Aluminum Hinges due to the brittle nature of aluminum.
Sold individually, we recommend changing both hinges with you are replacing the hinge.
6-20-2012 No longer manufactured, what we have in stock, is what we have. You will have to replace with 301ST or 301SS Hinges
301AL-XX -
Defender 12” Window Hinge | Securistyle Hinges
Securistyle Defender 12” Window Hinge
This hinge is used on aluminum, vinyl and wood windows. They are fitted with a unique plastic raiser block which guarantees a sure fit. This hinge is 12” long, has a 1/2” stack height and measures 11/16” wide and is constructed of Stainless Steel. We sometimes see Securistyle or made in the UK stamped on the hinge.
Sold in Pairs
WH112 -
4 Bar Window Hinge A.W. Anderberg 201SS
A.W. Anderberg 201SS 4 bar window hinge, stainless steel construction.
Usually found on light commercial or residential buildings with hopper windows.
23/32" track width x 1/2" stack height.
If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.
Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.
201SS-XX