Search results for: '30841 lever operator for jeld we asement window'
- Related search terms
- window tentry good 30895 301
- window truth goods 30905 301
- window truth goods 30897 301
- window truth goods 30866 301
- window truth goods 31879 301
- window truth good 30866 301
- window truth goods 30591 301
- window+tentry+good+30842 301
- window truth entry good 30897 301
- window tentry goods 31876 301
-
4 Bar Window Hinge A.W. Anderberg 77AL
A.W. Anderberg 77AL 4 Bar Window HInge, Aluminum Construction
29/32" track wide x 11/16" stack height
Found in commercial aluminum framed hopper windows.
10", 12" and 14" only, if you have an older larger size, please use the A.W. Anderberg 301ST or A.W. Anderberg 301SS as a replacement. You might have to shim the tracks in these cases, because the stack height is lower on the steel and stainless steel hinges. A.W. Anderberg no longer makes the larger sizes of the Aluminum Hinges due to the brittle nature of aluminum.
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
6-20-2012 No longer manufactured, what we have in stock, is what we have. You will have to replace with 301ST or 301SS Hinges
77AL-XX -
Casement Operator 11" Arm
Casement Window Operator 11" Arm
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
RO269-70 -
Project In Truth Handle-1-1/2"- 1/2" Lock Up
The Project In Truth Handle-1-1/2"- 1/2" Lock Up is a handle we have seen since the 1970's. This window handle features a 1-1/2" hole spacing on centers with a 1/2" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. We find it used on Project In or Thru Rail type Hopper windows. We stock the Bronze color, but other colors are available, call for more information.
Right Hand handle shown in picture.
P2732 -
Truth Awning Operator 11.10 30895
Truth Awning Operator 11.10 30895 is the most common of all the Truth Awning Operators. The arms stretch 21-1/2" in the closed position. If you arms stretch 16-1/8" order Wi1112. If your arms stretch 11-3/8" order the Wi1130.
Common numbers sometimes found on this operator are 40510, 40511, 31703 30895, 30895a and 31704. You may see just one or a couple of them on it.
The Wi11454 handle in matching color is included with the operator along with the Sash Hook Wi20008.
Color Chart
WI1110 -
Project In Truth Handle-1-1/2" -7/16" Lock Up
The Project In Truth Handle-1-1/2" -7/16" Lock Up is a handle we have seen since the 1970's. This window handle features a 1-1/2" hole spacing on centers with a 7/16" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. It is used on Project In or Thru Rail Hopper style windows. We stock the Bronze color, but other colors are available, call for more information.
Right hand handle is shown in the picture.
P2731 -
Truth 11329 Folding Crank Handle
The Truth 11329 Folding Crank Handle is constructed of die cast metal and plastic. The handle is metal, but the part the mounts on the window spline or shaft is plastic. The handle tilts down to clear blinds and is held in place by a small flat head screw. The only issue we see with this handle is the plastic piece that mounts on the shaft of the operator, this some times strips out, but usually only in rental properties. This handle will work on all Truth Crank Operators, and has an 11/32" spline.
Color Chart
Wi11329 -
Two Hole Wedgeless Cam Handle 1-1/4"
The Two Hole Wedgeless Cam Handle 1-1/4" is constructed of die cast metal and the flap is plastic. Hinged flap rolls down and locks the window shut. We find this window handle is used a lot in the western states on residential windows. The older version had a 1-3/8" hole spacing, but the new one has 1-1/4" hole spacing.
Sometimes we find the number R1 and CAN on this handle
White only!
WI32455 -
Truth Entrygard Operator - Stainless Steel 4-7/16
Truth Entrygard Dual Arm Window Operator. This operator is the same as the Wi1510, except are arms are made of stainless Steel
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Common numbers found on this operator are 30758 RH , 30757 LH, 30514, 30852, 20812, and 30767
Left hand shown.
Window Operator Handing
WI1514 -
Securistyle Defender 10” Window Hinge
Securistyle Defender 10” Window Hinge
This hinge is used on aluminum, vinyl and wood windows. They are fitted with a unique plastic raiser block which guarantees a sure fit. This hinge is 10” long, has a 1/2” stack height and measures 11/16” wide and is constructed of Stainless Steel. We sometimes see Securistyle or made in the UK stamped on the hinge.
Sold in Pairs
WH110DE -
Truth Entrygard Operator 40575 Or 40574
Truth Entrygard Operator 40575 Or 40574
Common numbers found on the older version of this operator are 40575 for the right hand operator, and 40574 for the left hand operator
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Left hand shown.
Window Operator Handing
WI1594 -
Truth 22.17 Awning Operator 13-1/4"
Truth 22.17 Awning Operator 13-1/4"
Surface mounted Truth Awning Window Operator. The arms span 13-1/4” from rivet to rivet. The mounting holes measure 6-7/8” on the outside screws center to center, and 6” center to center on the two inside mounting screws.
Truth Part # 22.17
Wi2217- -
Truth Entrygard Operator 20544
Truth Entrygard Operator 20544
Common numbers found on this operator are 30636, 30637, and 20544 for the old style,
31368, 20810, and 45275 for the new style. Also known as a TH-23078 and TH-23079.For link off-set up version order Wi1562
See attached file of what the Original Version looked like
Left hand shown.
Window Operator Handing
WI1511 -
4 Bar Window Hinge A.W. Anderberg 201ST
A.W. Anderberg 201ST 4 bar window hinge, cadmium plated steel construction.
Usually found on light commercial or residential buildings with hopper windows. This hinge is being discontinued, and replaced by the 201SS Hinge, which has the same hole spacing, length, and stack height.
23/32" track width x 1/2" stack height.
If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.
Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.
201ST-XX -
4 Bar Window Hinge A.W. Anderberg 301SS
A.W. Anderberg 301SS 4 Bar Window Hinge, with stainless steel construction.
Usually found on commercial aluminum framed windows.
If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301SS-XX -
Truth 50.60 Encore Dyad Operator
The Truth 50.60 Encore Dyad Operator has been in production since about 1999. In the beginning Truth offered the Maxim and the Encore Systems. The Maxim is being phased out and the Encore is the only one made now. The Encore will replace all of the Maxim operators, and have the same hole spacings and operation, but they have the interchangeable handle and covers.
The Operator in the Picture is a Left Hand.
Window Operator Handing
Wi5060 -
Window Handle Angle Base 1-3/8" Truth
Angle Base 1-3/8" Window Handle Truth
Also known as the Truth 25.39, this handle is constructed of a die cast metal and powder coated to the desired color. The distance between the screws is 1-3/8" on center. The handle measures 3-3/4" long, base measures 2-1/8" long. The number found on the handle is 45086 for the Right Hand, and 45085 for the Left Hand. We also find U.S. Pat. # 4,930,820
Right Hand is shown in picture.
T266- -
Casement Roto Operator
Casement Roto Operator
This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes. The housing is contructed of die case metal that is electro-statically painted. The housing is 5-1/2" wide. The optional handle fits the 5/16" Hex Shaft.
Left Hand Shown in picture
Wi21062- -
Two Hole 1-1/2" Wedgeless Cam Handle
Two Hole 1-1/2" Wedgeless Cam Handle
Hinged flap rolls down and locks the window shut. We find this window handle is used alot in the western states. The older version had a 1-3/8" hole spacing, but the new one has 1-1/2" hole spacing.
Sometimes we find the number R and 1 on the flap and DISCO cast in on the back of the handle.
White only!
Wi32552-