Search results for: '30841 lever operator for jeld we asement window'
- Related search terms
- window truth 3entry goods 30842 300
- window truth goods 30591 301
- window+truth+entry+good+30645 301
- window+truth+30851entry+goods+30645 301
- window+truth+good+30591 301
- window+tentry+good+30842 301
- window+truth+30851entry+good+31879 301
- window truth 30851entry good 31539 300
- window tentry goods 30897 300
- window tentry goods 31877 300
-
4 Bar Window Hinge A. W. Anderberg 301ST
A.W. Anderberg 301ST Cadnium Plated Steel HInge
Usually used on commercial hopper windows. If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges. This hinge has been discontinued, and is replaced by the 301SS hinge, which has the same hole spacing, length, and stack height.
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301ST-XX -
Ives Window Lock 07
The Ives Window Lock 07 are made of solid brass and plated to your desired finish. We are offering them in Brushed Brass, Satin Nickel, Polished Chrome and Brushed Chrome. The base is 15/16" x 2-9/16", and the Strike is 5/8" x 2-9/16" with both have a center to center screw spacing of 1-15/16".
Ives Part # 07
Wi07- -
Channel Balances 60 Series
60 Series Channel Balances
The most common type of channel balance. Your existing channel usually has a number stamped on it, usually a 4 digit number. This number tells us the lenth of the channel, and the gauge of the spring. After you have that, you will need to look through the pdf below and pick the plastic ends that are the closest to yours. If we have the number stamped on the channel, and the ends that are attached, we can get them ordered with the ends attached, usually for about $12.00 ea.
WI60XXXX -
Project In Handle 1-3/8"
The Project In Handle 1-3/8" is one of our most popular window handles. We find it used on commercial hopper style windows. This handle is sometimes called a Project In or Thru Rail window handle. This window handle has a hole spacing of 1-3/8" with a 7/16" lock up, C dimension in diagram below. The handle is constructed of cast white bronze with a brushed nickel finish.
P4907 -
Truth Casement 14" Hinge 14.17 30986
Truth 14.17 Casement Hinge-Pair
The 14.17 is not that popular of a hinge. But if your track measures 14" than this is probably what you have. The hinge has a stack height of 7/16". The outside screw holes measure 12-3/8" on center. We sometimes find the number 30986 on the arm and 41498 and 41499 on the stainless steel track.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
Wi1417 -
Two Hole Cam Handle 1-1/2" 9/32" Lock Up
The Two Hole Cam Handle 1-1/2" 9/32" Lock Up is is constructed cast white bronze with a brushed nickel finish. This handle is the same as the T1015, but with an 1-1/2" hole spacing. The 9/32" is the distance from the mounting plate bottom to the bottom of the handle. We find this handle on awning and hopper style windows.
Right Hand Shown in Picture
T1025 -
Two Hole Cam Handle 1-1/2" Plastic Window Handle
The Two Hole Cam Handle 1-1/2" Plastic Window Handle is constructed of high density plastic. The mounting hole spacing is an 1-1/2". The lock up dimension is 3/8". The base measures 2-1/8" x 7/8". The handle measures 3-1/2" long. We seem to only find this handle on basement egress window in residential environments.
The white is in stock, the beige has a 1-3 week lead time.
Wi32403- -
Truth Two Hole Cam Handle 1-1/2" Inline
The Truth Two Hole Cam Handle 1-1/2" Inline has a die cast construction with a powder coated paint finish. It features an 1-1/2" hole spacing. We find the numbers 45086 on the right hand handles, and 45085 on the left hand handles. This handle is very popular on aluminum framed commercial windows due to its low cost.
The handle shown in the picture is a Right Hand.
Color Chart
T268 -
Truth Window Handle 24.25
The Truth Window Handle 24.25 is one of the more popular window handles. On the older version the handle was plastic toward the end of the handle, and it would break off. The new version is metal all the way to the end. It has 2-1/2" on center mounting screws, and the mounting plate is 2-7/8" long x 5/8" wide. This Truth Casement Window Handle sometimes has the number 45200 or 45268 cast into it. And U.S. Patent Number 4.674.777. See the exact measurements in the "More Views" window.
Color Chart
Wi2425. -
Truth 12614 and 12616 Encore Handle and Cover
The Truth Encore Handle and Cover are used on the Encore Operators Wi5110 and Wi5010. The flush design is ideal when you have curtains and blinds on your window. The cover are constructed on Plastic and the Handles are die cast metal. Use the drop down menu to figure out hand, the color is not correct by the handing is, select color and then hand.
Color Chart
Truth Part Numbers 12614 (Left Hand) and 12616 (Right Hand).
Wi126XX -
Fenestra Window Handle-2-5/8"
The Fenestra Casement Handle is very common on Fenestra Windows made in the 1950's. Common markings on this handle are 2845 and Fenestra. The handle has a 2-5/8" center to center dimension on the mounting holes, with a 9/16" lock up. Cast white bronze construction with a brushed nickel finish.
Right hand shown
C2845 -
Truth Offset Strike Housing 20237
Truth Offset Strike Housing 20237 are now only available in Black
The Truth 20237 Strike Housing is used with the 20231, 20232 and 20233 Strike Inserts. By selecting the proper Strike Insert you can control the height of the lock up. The 20237 is an Off Set Strike, meaning the mounting holes of the strike are off set to the center line of the strike. The holes are 1-1/2" on center, and the housing measures 5/8" wide by 2-1/16".
Truth Part # 20237.xx
WI20237- -
Window Handless Lock 1-3/8"
Handless Window Lock 1-3/8"
This handle has a cast white bronze with a brushed nickel finish construction with a 1-3/8" center to center screw spacing. The handle has a 9/32" lockup, or distance between the base plane and the under side of the tongue. 1/8" allen screw will lock the handle so it can not be opened. This handle is ideal for schools, hospitals, and any other institution that is trying to lower heating and cooling costs by keeping the windows shut.
AC3471SS-