Robert Brooke

Casement Window Operator 11" Arm

Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.

Angle Base Window Handle Kaiser

Cast white bronze with a brushed nickel finish

Used on Kaiser Windows

Angle Base 1-3/8" Window Handle-11/16" Drop

Cast white bronze with a brushed nickel finish

Angle Base Window Handle

Cast white bronze with a brushed nickel finish

Angle Base 1-3/8" Window Handle

Cast white bronze with a brushed nickel finish

Window Handle Casement - 2-3/8" Hole Spacing

The hole spacing is 2-3/8" between screws and has a 1/2" lock up (distance between inside of cup to back of handle). Cast white bronze with a brushed nickel finish.

Right hand shown

Project In Window Handle 1-3/8"

This window handle features a 1-3/8" hole spacing with a 7/16" lock up. The mounting holes are located on the back of the handle and are tapped for a standard thread screw. Cast white bronze, with brushed nickel finish.

Project In Window Handle with a 1-3/8" hole spacing and a 7/16" lock up dimension.   Constructed of Cast white bronze with a brushed nickel finish.

The Project In Handle 1-3/8" is one of our most popular window handles.  We find it used on commercial hopper style windows.  This handle is sometimes called a Project In or Thru Rail window handle.  This window handle has a hole spacing of 1-3/8" with a 7/16" lock up, C dimension in diagram below. The handle is constructed of cast white bronze with a brushed nickel finish.

Project In Window Handles-1-1/2"

This window handle has a hole spacing of 1-1/2" with a 7/16" lock up. It is also known as a Off-Set Project In Window Handle because the point of rotation does not line up with the screws holes, it is off-set. Cast white bronze with a brushed nickel finish

Project In Window Handle -1-3/8" with a 7/16" lock up dimension.  Constructed of Cast white bronze with a brushed nickel finish.

The Two Hole Cam Handle 1-3/8" - 9/32" Lock Up is constructed of cast white bronze with a brushed nickel finish. The handle has a 1-3/8" hole spacing with 9/32" lock up dimension. This window handle is one of our most popular.

The picture is a Right Hand

The Two Hole Cam Handle 1-1/2" 9/32" Lock Up is is constructed cast white bronze with a brushed nickel finish.  This handle is the same as the T1015, but with an 1-1/2" hole spacing.  The 9/32" is the distance from the mounting plate bottom to the bottom of the handle.  We find this handle on awning and hopper style windows.

Right Hand Shown in Picture

Two Hole 1-3/8" Window Handle 5/16" Lockup

Cast white bronze with a brushed nickel finish

Right Hand Shown

Two Hole 1-1/2" Window Handle

This handle features a 1-1/2" hole spacing with a 5/16" lock up. The handle is made of cast white bronze construction, with brushed nickel finish.

Right Hand Shown

Two Hole 1-3/8" Window Handle 5/16" Lockup With Ring Pull

This window handle features a 1-3/8" hole spacing, a 5/16" lock up dimension and a ring pull for elevated windows. This handle is cast white bronze construction with a brushed nickel finish.

Right Hand Shown

Two Hole 1-1/2" Window Handle

This window handle has a 1-1/2" hole spacing with a 5/16" lock up dimension. The handle also features a ring pull for elevated windows. Cast white bronze with a brushed nickel finish.

Right Hand Shown

Two Hole 1-3/8" Window Handle

This window handle features a 1-3/8" hole spacing with a 1/4" lock up. The window handle is constructed of a die cast material that is then powder coated.

Right Hand Shown in Picture!

Two Hole 1-3/8" Window Handle 5/16 Lock Up

This window handle features a 1-3/8" hole spacing wth a 5/16" lock up. The handle as a cast white bronze construction with a brushed nickel finish

Two Hole 1-1/2" Window Handle

This window handle features an 1-1/2" hole spacing and a 1/4" lock up . The handle is cast white bronze construction with a brushed nickel finish.

Right Hand shown in picture.

Project In Handle With Ring Pull 1-1/2"

This is a very popular window handle. The handles has a hole spacing of 1-1/2" with a C Dim of 7/16" lock up.  This is used for a replacement for many manufactures. This handle is constructed of cast white bronze with a brushed nickel finish.

Angle Base 1-3/8" Window Handle-1/2 Drop With Ring Pull

Cast white bronze with a brushed nickel finish

Angle Base 1-3/8" Window Handle-1/4" Drop

Cast white bronze with a brushed nickel finish

Angle Base 1-3/8" Window Handle-1/2" Drop

The window handle is cast white bronze with a brushed nickel finish

Two Hole Cam Handle 1-1/4" 5/16" Lockup With Ring Pull

This window handle features a 1-1/4" hole spacing, a 5/16" lock up dimension and a ring pull for elevated windows. This handle is cast white bronze construction with a brushed nickel finish

Casement Window Operator 9" Arm

Replacement Casement Window Operator is made of a die cast housing and steel arm. The window operator housing has 4 mounting holes, 4-3/4" are the outside dimensions of the outside screws and 3-7/8" on the inside screws.

Right Hand Operator Shown in picture

Handing Diagram

Project In Window Handle 1-1/2"

This window handle has a 1-1/2" hole spacing with a C Dim 7/16" lock dimension. The handle is constructed of a white bronze casting that is then brushed nickel plated.

Casement Window Operator 9" Arm

Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 9" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.

Ro267 Right Hand
Ro268 Left Hand

Handing Diagram

The Split Arm Roto Operator has been around for the past 10-15 years.  The housing is 4-1/2" wide, and the linkage arm has an overall length of 4-3/8".  One of the most recognizable features of this mechanism is the female hex fitting for the handle.

Right Hand shown in the picture

Roto Split Arm Operator Pin Up

The housing is 4-1/2" wide, and the linkage arm has an overall length of 4-3/8"

Left Hand shown in the picture

Casement Roto Operator

This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes.  The housing is contructed of die case metal that is electro-statically painted.   The housing is 5-1/2" wide.  The optional handle fits the 5/16" Hex Shaft.

Left Hand Shown in picture

The Two Hole Wedgeless Cam Handle 1-1/4" is constructed of die cast metal and the flap is plastic. Hinged flap rolls down and locks the window shut. We find this window handle is used a lot in the western states on residential windows. The older version had a 1-3/8" hole spacing, but the new one has 1-1/4" hole spacing.

Sometimes we find the number R1 and CAN on this handle

White only!

The Project-In Window Handle W/ Ring Pull 1-3/8" is used on elevated windows were the user wants to use a pole hook to open and close the window.  The handle features an 1-3/8" hole spacing and a 7/16" lock up.   Cast white bronze with a brushed nickel finish.