Search results for: '30866 lever operator for jeld when chart window'
- Did you mean
- 30866 lever operator for jeld when chang window 0
- 30841 lever operator for jeld when chart window 0
- 30842 lever operator for jeld when chart window 0
- 30866 lower operator for jeld when chart window 0
- 30866 lever operator for jeld when cast window 0
- Related search terms
- window tentry good 30895 301
- window truth good 30866 301
- window+truth+entry+good+30895a 301
- window truth goods 30591 301
- window+truth+entry+good+30645 301
- window+truth+30851entry+goods+30645 301
- window+truth+good+30591 301
- window+tentry+good+30842 301
- window+truth+30851entry+good+31879 301
- window truth entry good 30897 301
-
Truth Contour Window Crank 11454
Truth Contour Window Crank 11454
Truth 11454 Contour Handle. Will work with all Truth Operators manufactured after 1978. Features a snap on clip, so no tools are needed. We sometime find the number 45240 cast into the back of the handle.
11/32" spline
Tuth Part # 11454.xx were xx is the color
Color Chart
Wi11454 -
Casement Operator 11" Arm
Casement Window Operator 11" Arm
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
RO269-70 -
Truth 45145 Plastic Tie Bar Guide
Truth 45145 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi45145 -
Truth Entrygard Operator - Stainless Steel 4-7/16
Truth Entrygard Dual Arm Window Operator. This operator is the same as the Wi1510, except are arms are made of stainless Steel
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Common numbers found on this operator are 30758 RH , 30757 LH, 30514, 30852, 20812, and 30767
Left hand shown.
Window Operator Handing
WI1514 -
4 Bar Window Hinge A. W. Anderberg 301ST
A.W. Anderberg 301ST Cadnium Plated Steel HInge
Usually used on commercial hopper windows. If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges. This hinge has been discontinued, and is replaced by the 301SS hinge, which has the same hole spacing, length, and stack height.
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301ST-XX -
Truth Entrygard Operator 40575 Or 40574
Truth Entrygard Operator 40575 Or 40574
Common numbers found on the older version of this operator are 40575 for the right hand operator, and 40574 for the left hand operator
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Left hand shown.
Window Operator Handing
WI1594 -
Truth Casement Handle Aluminum-2-3/8"
The Truth Casement Handle Aluminum-2-3/8" is used on many aluminum windows manufactured from the 1970's. This handle is the same as the Wi2423, but the lock up dimension is 3/8". The lock up dimension is the distance from the back of the handle mounting plate to the inside surface of the hook when it is closed. The handle features die cast construction, and is then powder coated to the desired finish. Aluminum and white in stock, call for other colors.
C1729-- -
4 Bar Window Hinge A.W. Anderberg 301SS
A.W. Anderberg 301SS 4 Bar Window Hinge, with stainless steel construction.
Usually found on commercial aluminum framed windows.
If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301SS-XX -
Truth 22.17 Awning Operator 13-1/4"
Truth 22.17 Awning Operator 13-1/4"
Surface mounted Truth Awning Window Operator. The arms span 13-1/4” from rivet to rivet. The mounting holes measure 6-7/8” on the outside screws center to center, and 6” center to center on the two inside mounting screws.
Truth Part # 22.17
Wi2217- -
Truth Entrygard Operator 20544
Truth Entrygard Operator 20544
Common numbers found on this operator are 30636, 30637, and 20544 for the old style,
31368, 20810, and 45275 for the new style. Also known as a TH-23078 and TH-23079.For link off-set up version order Wi1562
See attached file of what the Original Version looked like
Left hand shown.
Window Operator Handing
WI1511 -
Truth 41157 Plastic Tie Bar Guide
Truth 41157 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi41157 -
Truth 45141 Plastic Tie Bar Guide
Truth 45141 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi45141 -
Truth 50.60 Encore Dyad Operator
The Truth 50.60 Encore Dyad Operator has been in production since about 1999. In the beginning Truth offered the Maxim and the Encore Systems. The Maxim is being phased out and the Encore is the only one made now. The Encore will replace all of the Maxim operators, and have the same hole spacings and operation, but they have the interchangeable handle and covers.
The Operator in the Picture is a Left Hand.
Window Operator Handing
Wi5060 -
Truth Entrygard Operator Offset Down 20810 Or 20544
Truth Entrygard Dual Arm Operator. We would expect you to find 20810 or 20544 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Call or email for quantity "Discount Codes".
For offset up, order Wi1510.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
PART # HAND
WI1561R RIGHT HAND-Shown Below
WI1561L LEFT HAND-Shown BelowWI1561- -
Truth 11329 Folding Crank Handle
The Truth 11329 Folding Crank Handle is constructed of die cast metal and plastic. The handle is metal, but the part the mounts on the window spline or shaft is plastic. The handle tilts down to clear blinds and is held in place by a small flat head screw. The only issue we see with this handle is the plastic piece that mounts on the shaft of the operator, this some times strips out, but usually only in rental properties. This handle will work on all Truth Crank Operators, and has an 11/32" spline.
Color Chart
Wi11329 -
Truth Window Handle 24.25
The Truth Window Handle 24.25 is one of the more popular window handles. On the older version the handle was plastic toward the end of the handle, and it would break off. The new version is metal all the way to the end. It has 2-1/2" on center mounting screws, and the mounting plate is 2-7/8" long x 5/8" wide. This Truth Casement Window Handle sometimes has the number 45200 or 45268 cast into it. And U.S. Patent Number 4.674.777. See the exact measurements in the "More Views" window.
Color Chart
Wi2425. -
Casement Roto Operator
Casement Roto Operator
This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes. The housing is contructed of die case metal that is electro-statically painted. The housing is 5-1/2" wide. The optional handle fits the 5/16" Hex Shaft.
Left Hand Shown in picture
Wi21062- -
Truth Skylight Operator-Angle Drive 42.65
The Truth Skylight Operator-Angle Drive 4265 is easy to install on wood, metal or vinyl skylights. Gear reduction provides needed lift for sash weights up to 140 lbs. Steel chain is detachable at the sash for easy maintenance. The housing measures 2-3/4" wide by 10-3/4" long with a thickness of 7/8". We find the number 40966 stamped on the back cover.
Wi4265- -
Truth Casement Hinge 14.75 -Sold In Pairs 30744
The Truth 14.75 hinge is the most common of the Truth Casement Hinges. The stainless steel track is 10" long, the glide is a plastic coated steel. The most common problem on this hinge is the shoe. When the hinge is installed incorrectly or not maintained the shoe could pull out the window track. Common numbers found on this hinge are 30744B, 31133C, 40942 and 40941.
This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
WI1475