Search results for: '30866 lever operator for jeld when chang window'
- Did you mean
- 30866 lever operator for jeld when crank window 0
- 30841 lever operator for jeld when chang window 0
- 30842 lever operator for jeld when chang window 0
- Related search terms
- windows+articulating+40577w+good 301
- windows articulating 40577w goods 301
- windows+articulating+40577w+goods 301
- window+truth+entry+goods+30851 301
- window tentry good 30895 301
- window truth 3entry good 30896 301
- window truth good 30896 301
- window+truth+goods+30842 301
- window truth entry good 30895a 301
- window truth good 31877 301
-
4 Bar Window Hinge A.W. Anderberg 201SS
A.W. Anderberg 201SS 4 bar window hinge, stainless steel construction.
Usually found on light commercial or residential buildings with hopper windows.
23/32" track width x 1/2" stack height.
If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.
Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.
201SS-XX -
4 Bar Window Hinge A.W. Anderberg 77AL
A.W. Anderberg 77AL 4 Bar Window HInge, Aluminum Construction
29/32" track wide x 11/16" stack height
Found in commercial aluminum framed hopper windows.
10", 12" and 14" only, if you have an older larger size, please use the A.W. Anderberg 301ST or A.W. Anderberg 301SS as a replacement. You might have to shim the tracks in these cases, because the stack height is lower on the steel and stainless steel hinges. A.W. Anderberg no longer makes the larger sizes of the Aluminum Hinges due to the brittle nature of aluminum.
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
6-20-2012 No longer manufactured, what we have in stock, is what we have. You will have to replace with 301ST or 301SS Hinges
77AL-XX -
4 Bar Window Hinge A.W. Anderberg 201ST
A.W. Anderberg 201ST 4 bar window hinge, cadmium plated steel construction.
Usually found on light commercial or residential buildings with hopper windows. This hinge is being discontinued, and replaced by the 201SS Hinge, which has the same hole spacing, length, and stack height.
23/32" track width x 1/2" stack height.
If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.
Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.
201ST-XX -
4 Bar Window Hinge A. W. Anderberg 301ST
A.W. Anderberg 301ST Cadnium Plated Steel HInge
Usually used on commercial hopper windows. If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges. This hinge has been discontinued, and is replaced by the 301SS hinge, which has the same hole spacing, length, and stack height.
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301ST-XX -
Truth Entrygard 11.43 Awning Operator 31545
Truth Entrygard 11.43 Awning Operator 31545
Arms are 8-3/8" long, and measures 20-3/4" across when the arms are in the closed position.
Awing Operator, we usually find 31545 stamped on the arm, they used to be a cadmium plated steel, now they are powder coated. We also find 21221 on it.
WI1143 -
Truth Entrygard Awning Operator 11.44 21221
Truth Entrygard Awning Operator 11.44 21221
Arms are 13-3/8" long, and the span of the arms when in the closed position, arms opposing each other, is 28-1/8" (Hole to Hole)
Awing Operator, we usually find 40759, 40760, and 21221 stamped on the arms, they used to be a cadmium plated steel, now they are powder coated.
WI1144 -
Truth Window Operator 59.05 Split Arm
Truth Window Operator 59.05 Split Arm
This operator is sometimes a replacement for the Wright Split Arm Operator.
White and Gold only
Common number found on this part is 21550
On the Wright Window Operator we might find a 07900 stamped on the arm.Window Operator Handing
Color Chart
WI5905 -
Truth 22.10 Awning Operator 24-7/8"
Truth 22.10 Awning Operator 24-7/8"
Surface mounted Truth Awning Window Operator. The arms span 24-7/8" when in the closed postion. The mounting screws are 7" on center on the outside screw holes and 6" on center on the inside holes. Plastic Glides are not available separately, they are riveted in place. The only number we have found on this operator is a UK Pat # 2135397
Truth Part # 22.10
WI2210 -
Truth 51.00 Maxim Awning Operator 41013 41016
Truth 51.00 Maxim Awning Operator 41013 41016 Manufactured since 1999 until May 2019. We have a few of them left, but if we do not we will be shipping the Wi5110, and will ship a matching cover and handle with it.
14-1/2" spread when in the closed position. We sometimes find the numbers 31881, 41013 and 41016 stamped on the underside of the 12" long arms. Ships with matching handle.
As of 7-30-2019 we are out of the 5100's, and will be shipping the Wi5110 with Wi21614 Folding Handle and Cover
Color Chart
WI5100 -
Truth Entrygard Operator 20755
Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755. Call or email for quantity "Discount Codes".
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
3-3/4" link dimension, offset up. For offset down order Wi1520
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.PART # HAND
WI1516R RIGHT HAND-Shown Below
WI1516L LEFT HAND-Shown BelowWI1516 -
Casement Window Operator 9" Arm
Casement Window Operator 9" Arm
Replacement Casement Window Operator is made of a die cast housing and steel arm. The window operator housing has 4 mounting holes, 4-3/4" are the outside dimensions of the outside screws and 3-7/8" on the inside screws.
Right Hand Operator Shown in picture
Handing Diagram
RO392 -
4 Bar Window Hinge A.W. Anderberg 301SS
A.W. Anderberg 301SS 4 Bar Window Hinge, with stainless steel construction.
Usually found on commercial aluminum framed windows.
If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301SS-XX -
Truth Entrygard Operator (20755 On Bottom Of Linkage Arm)
Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the bottom of the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755. Call or email for quantity "Discount Codes".
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
3-3/4" link dimension, offset down. For offset up order Wi1516
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.Left hand shown.
PART # HAND
WI1520R RIGHT HAND-Shown Below
WI1520L LEFT HAND-Shown BelowWI1520 -
Truth 51.10 Encore Awning Operator
The Truth 51.10 Encore Awning Operator is used on windows that open from the bottom and swing out, like a one piece garage door. When in the closed position, the arms have an approximate length of 15 inches. The housing is constructed of die cast metal, and arms are steel. The complete assembly is electro statically painted. The operator ships with the 31879 detach clip, but does not include the 11647 Maxim Slide Shoe. The slide shoe is the piece that slides in the track at the bottom of the window. A common number we find on this operator is 41013.Wi5110 -
Truth Entrygard Operator 20748
Truth Entrygard Dual Arm Operator. We would expect you to find 20748 on the linkage arm, which measures 2-7/8" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20748. Call or email for quantity "Discount Codes".
2-7/8" linkage dimension, off set up.
Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Left hand shown in main picture.
PART # HAND
WI1515R RIGHT HAND-Shown Below
WI1515L LEFT HAND-Shown BelowWI1515- -
Truth Split Arm Operator 30905
Truth Split Arm Operator 30905
Common number found on this operator is 30905, which is found on the linkage arm, along with 45035 on the body, 40351 and 40352 on the arms. Also known as a TH-24174, TH-24175, TH-24176, and TH-24177. Replaces the TH-24018, TH-24019, TH-24020 and TH-24021.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.
Left hand shown.
Window Operator Handing
Color Chart
WI1518 -
Truth Split Arm Operator 31850
Truth Split Arm Operator 31850
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.
Left hand shown. White and Coppertone only
Common numbers found on this operator is 31850
Window Operator Handing
Color Chart
WI1530 -
Fenestra Window Operator 4-1/4"
The Fenestra Window Operator 4-1/4" was used between 1930 to 1970. The operator features die cast metal construction with a steel arm. The original version was made of cast bronze, which in today's market would be cost prohibitive. This unit ships with handle and mounting screws.
Right Hand Operator shown in picture.
Handing Diagram
RO162