Search results for: 'window+truth+goods+30842'

Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755.  Call or email for quantity "Discount Codes".

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

3-3/4" link dimension, offset up. For offset down order Wi1520

Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

PART # HAND

WI1516R RIGHT HAND-Shown Below

WI1516L LEFT HAND-Shown Below

Truth Entrygard Dual Arm Operator. We would expect you to find 20748 on the linkage arm, which measures 2-7/8" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20748.  Call or email for quantity "Discount Codes".

2-7/8" linkage dimension, off set up.

Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

Left hand shown in main picture.

PART # HAND
WI1515R RIGHT HAND-Shown Below

WI1515L LEFT HAND-Shown Below

Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the bottom of the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755.  Call or email for quantity "Discount Codes".

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

3-3/4" link dimension, offset down. For offset up order Wi1516

Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

Left hand shown.

PART # HAND

WI1520R RIGHT HAND-Shown Below

WI1520L LEFT HAND-Shown Below

Truth Entrygard Dual Arm Operator. We would expect you to find 20810 or 20544 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544.  Call or email for quantity "Discount Codes".

For offset up, order Wi1510.

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

PART # HAND
WI1561R RIGHT HAND-Shown Below

WI1561L LEFT HAND-Shown Below

Truth Entrygard Dual Arm Operator. We would expect you to find 20810 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Also known as a TH-23076 or TH-23077.

4-7/16" link dimension, offset up. For offset down, order Wi1561.

Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

MOST POPULAR SIZE

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

PART # HAND

WI1510R RIGHT HAND-Shown Below

WI1510L LEFT HAND-Shown Below

The Truth Window Handle 24.25 is one of the more popular window handles.  On the older version the handle was plastic toward the end of the handle, and it would break off.  The new version is metal all the way to the end.  It has 2-1/2" on center mounting screws, and the mounting plate is 2-7/8" long x 5/8" wide.  This Truth Casement Window Handle sometimes has the number 45200 or 45268 cast into it. And U.S. Patent Number 4.674.777.  See the exact measurements in the "More Views" window.

Color Chart

Truth Window Lock 24.30

The Truth 24.30 Window Sash Lock has a hole spacing of 3-13/16" and the locking lug projects 1-3/8"

Truth Window Operator 59.05 Split Arm

This operator is sometimes a replacement for the Wright Split Arm Operator.

White and Gold only

Common number found on this part is 21550
On the Wright Window Operator we might find a 07900 stamped on the arm.

Window Operator Handing

Color Chart

Truth 23.00 Window Operator 9-1/2"  rear mounting

9-1/2" arm, rear mounting, Ships with matching handle.

Left Hand Shown in picture

Color Chart

Handing Diagram

Truth 23.02 Window Operator 13-1/2"

13-1/2" long arm. Rear Mounting. Ships with matching handle.

Left Hand Shown in picture

Color Chart

Handing Diagram

Truth Window Lock 24.31

Truth casement window lock 24.31.  The hole spacing is 3-13/16" and the "Fork" projects out  1-7/8".   Housing is made of die cast metal that is then powder coated.

Truth Part # 24.31.xx.004

Truth Offset Strike Housing 20237 are now only available in Black

The Truth 20237 Strike Housing is used with the 20231, 20232 and 20233 Strike Inserts.   By selecting the proper Strike Insert you can control the height of the lock up.  The 20237 is an Off Set Strike, meaning the mounting holes of the strike are off set to the center line of the strike.  The holes are 1-1/2" on center, and the housing measures 5/8" wide by 2-1/16".

Truth Part # 20237.xx  

Truth 23.46 Window Operator 30866

White and Bronze only. Ships with matching handle.  The Right Hand Bronze shown in the picture.

Common numbers found on this operator is 30866

Color Chart

Window Operator Handing

Truth Window Operator 15.59

Same as the Wi1531 but with Metal 9/16" roller. Ships with matching handle.

Color Chart

Window Operator Handing

Handless Truth Window Lock

Truth 28.17 Handless Window Lock, die cast and steel construction. Powder coated paint.

Aluminum only

Truth 23.54 Window Operator 30866

A common number found on this operator is 30866

4-1/2" long linkage arm, Ships with matching handle.

Window Operator Handing

Color Chart

Truth 30645 Round Window Crank Handle. Fits all Truth Operators. Handle has a 2 inch diameter.

11/32" spline

Truth part # 30645.xx were xx is the color code

Color Chart

Truth Contour Window Crank 11454

Truth 11454 Contour Handle. Will work with all Truth Operators manufactured after 1978. Features a snap on clip, so no tools are needed.  We sometime find the number 45240 cast into the back of the handle.

11/32" spline

Tuth Part # 11454.xx were xx is the color

Color Chart

Angle Base 1-3/8" Window Handle Truth

Also known as the Truth 25.39, this handle is constructed of a die cast metal and powder coated to the desired color. The distance between the screws is 1-3/8" on center. The handle measures 3-3/4" long, base measures 2-1/8" long. The number found on the handle is 45086 for the Right Hand, and 45085 for the Left Hand. We also find U.S. Pat. # 4,930,820

Right Hand is shown in picture.

Truth 16.52 Sash Lock. A very common sash lock that tends to fail because the plastic slide breaks due to incorrect installation at the window manufacturer or being forced when there is a obstruction in the window opening. The new replacement model has a thicker plastic slide. Because the slide is thicker, the keeper, part # Wi41268 and Wi41269 might have to be shimmed with small washers.  The lock measures 2-5/16" between screws, 2-3/4" high by 2-3/16" deep and 1" thick.  Truth did make a Sash Lock that was similar to this one, but was 3-1/2" tall, that model has been discontinued.

Common numbers found on this sash lock are 21328 and 45189

Non handed (can be used on right or left hand windows).

Color Chart

Truth Multi Point Locking System sash lock. The hole spacing on the lock is 3-7/16"

Left Hand Shown in Picture

Common numbers found on this lock is 31401 and 31402

Color Chart

Truth Window Lock 24.33

The Truth 24.33 Window Sash Lock has a hole spacing of 3-13/16" and the locking lug projects 1-5/8"

The Project In Truth Handle-1-1/2" -7/16" Lock Up is a handle we have seen since the 1970's.  This window handle features a 1-1/2" hole spacing on centers with a 7/16" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice.  It is used on Project In or Thru Rail Hopper style windows. We stock the Bronze color, but other colors are available, call for more information.

Right hand handle is shown in the picture.

Truth 10579 Window Operator Handle

We some times find the number 45054 cast in the back side of this handle.  This handle fits all Truth Operators with a 11/32" spline, which is all of them made after 1975.

Truth part # 10579.xx were xx is the color code

Color Chart

Truth Window Operator 6" / Truth 15.39 Single Arm Window Operator.

6" long arm, Ships with matching handle.

Bronze, white or gold only.

Truth Window Operator 7-1/2"

7-1/2" long arm. Ships with matching handle.

Truth Part # 15.56

Bronze only

Truth 23.01 Single Arm Front Mounting

9-1/2" arm

Left Hand Shown in picture

Color Chart

Handing Diagram

Truth Split Arm Operator 15.26

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.

Left hand shown. White and Bronze only

Color Chart

Window Operator Handing

Truth 23.03 Window Operator 13-1/2"

13-1/2" Arm, Front Mounting, Ships with matching handle.

Left Hand Shown in picture

Color Chart

Handing Diagram

Truth Awning Operator 22.21

The arms stretch 21-1/2" across in the closed position. The housing is front side mounted with 4 screws. The spacing on the outside screws are 7" on center, and 6" on the inter screws.

The Wi11454 handle in matching color is included with the operator along with the Sash Hook Wi20008.

Color Chart

Truth 11" Surface Mounted Operator

This Truth Surface Mounted Window Operator is usually used on commercial aluminum windows. It features an 11" long arm, measured from the center of the housing to the center of the metal roller. The outside mounting screw holes are 4-3/4" a part and the inter screws are 3-7/8" on center.

Right Hand Shown, in Aluminum

Right Hand Aluminum Wi36223AL
Left Hand Aluminum Wi36222AL
Right Hand Bronze Wi36223BR
Left Hand Bronze Wi36222BR
Right Hand White Wi36223W
Left Hand White Wi36222W

Truth Handless Lock Key

Truth part # 20313

Truth 10.11 Lever Window Operator Double Pull More Than 2"

Handle assembly projects more than 2"

Dual Arm Truth Maxim Operator 50.10

The Truth 50.10 Maxim Dual Arm is one of the more popular new style operators. This operator is the same as the 50.00, but without the painted steel cover riveted to it. Some numbers we find on this operator are 41011 and 31876.

Left Hand Operator shown in picture.

The Project In Truth Handle-1-1/2"- 1/2" Lock Up is a handle we have seen since the 1970's.  This window handle features a 1-1/2" hole spacing on centers with a 1/2" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. We find it used on Project In or Thru Rail type Hopper windows.  We stock the Bronze color, but other colors are available, call for more information.

Right Hand handle shown in picture.