Search results for: '30866+lever+operator+for+jeld+when+crank+window'
- Did you mean
- 30841 lever operator for jeld when crank window 0
- 30842 lever operator for jeld when crank window 0
-
Truth Split Arm Operator 15.26
Truth Split Arm Operator 15.26
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.
Left hand shown. White and Bronze only
Color Chart
Window Operator Handing
WI1526 -
Truth 11" Surface Mounted Operator
Truth 11" Surface Mounted Operator
This Truth Surface Mounted Window Operator is usually used on commercial aluminum windows. It features an 11" long arm, measured from the center of the housing to the center of the metal roller. The outside mounting screw holes are 4-3/4" a part and the inter screws are 3-7/8" on center.
Right Hand Shown, in Aluminum
Right Hand Aluminum Wi36223AL
Left Hand Aluminum Wi36222AL
Right Hand Bronze Wi36223BR
Left Hand Bronze Wi36222BR
Right Hand White Wi36223W
Left Hand White Wi36222WWi3622X -
Truth 16.52 Window Lock
Truth 16.52 Sash Lock. A very common sash lock that tends to fail because the plastic slide breaks due to incorrect installation at the window manufacturer or being forced when there is a obstruction in the window opening. The new replacement model has a thicker plastic slide. Because the slide is thicker, the keeper, part # Wi41268 and Wi41269 might have to be shimmed with small washers. The lock measures 2-5/16" between screws, 2-3/4" high by 2-3/16" deep and 1" thick. Truth did make a Sash Lock that was similar to this one, but was 3-1/2" tall, that model has been discontinued.
Common numbers found on this sash lock are 21328 and 45189
Non handed (can be used on right or left hand windows).
Color Chart
WI1652 -
4 Bar Window Hinge A.W. Anderberg 201ST
A.W. Anderberg 201ST 4 bar window hinge, cadmium plated steel construction.
Usually found on light commercial or residential buildings with hopper windows. This hinge is being discontinued, and replaced by the 201SS Hinge, which has the same hole spacing, length, and stack height.
23/32" track width x 1/2" stack height.
If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.
Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.
201ST-XX -
Truth Awning Operator 22.21
Truth Awning Operator 22.21
The arms stretch 21-1/2" across in the closed position. The housing is front side mounted with 4 screws. The spacing on the outside screws are 7" on center, and 6" on the inter screws.
The Wi11454 handle in matching color is included with the operator along with the Sash Hook Wi20008.
Color Chart
Wi2221- -
Casement Operator 9" Arm
Casement Window Operator 9" Arm
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 9" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
Ro267 Right Hand
Ro268 Left HandHanding Diagram
RO267-8 -
Window Handless Lock 1-3/8"
Handless Window Lock 1-3/8"
This handle has a cast white bronze with a brushed nickel finish construction with a 1-3/8" center to center screw spacing. The handle has a 9/32" lockup, or distance between the base plane and the under side of the tongue. 1/8" allen screw will lock the handle so it can not be opened. This handle is ideal for schools, hospitals, and any other institution that is trying to lower heating and cooling costs by keeping the windows shut.
AC3471SS- -
Truth Operator 9-1/2"
Truth Operator 9-1/2". This new style replaces the older traditional size shown in the diagrams.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
We sometimes find the number 45251 cast on the housing, and 40049 and 40050 stamped on the arms. This operator has a Nylon Roller or Wheel.
Left hand shown. The Wi11454 handle in matching color is included
p>Window Operator Handing
Color Chart
WI1531 -
Dual Arm Truth Maxim Operator - 41011 31876
Dual Arm Truth Maxim Operator - 41011 31876-Discontinued in June 2019, we still may have some left, but are shipping the Wi5010, with matching color Flip and Fold Style handle and cover, they are the same operator without the metal cover.
7/31/2019 we are out of the Coppertone, we will be shipping the Wi5010 and matching finish handle and cover.
8/14/2019 we are out of the Bronze, we will be shipping the Wi5010 and matching finish handle and cover.
9/16/2019 we are out of the White, we will be shipping the Wi5010 and matching finish handle and cover.
11/13/2019 we are out the Gold, we will be shipping the Wi5010 and matching finish handle and cover.
4/6/2020 we are out the Beige, we will be shipping the Wi5010 and matching finish handle and cover.
3/17/2021 we are out the Clay, we will be shipping the Wi5010 and matching finish handle and cover.The Truth 50.00 Maxim Dual Arm is one of the more popular new style operators from Truth. They are only been around since 1999. Also known as a TH-24010, TH-24011, TH-24012, TH-24013, TH-24022, TH-24023, TH-24024, and TH-24025.
Common numbers sometimes found on this operator are 31876, 41011 and 41012.
WI5000 -
Truth 30568 Awning Operator Guide Bar
Awning Operator Guide Bar 30568
The Truth Operator Guide Bar measures 26-3/4" long with the two mounting holes at 26-1/8" on centers. The bar is constructed of extruded aluminum. The Wi10005 is the component that slides in this track. This track is mounted to the sash.
Truth Part # 30568
Wi30568 -
Maxim Dual Arm Operator-50.01 Low Profile
The Truth 50.01 Maxim Dual Arm is one of the more popular new style operators from Truth. They are only been around since 1999, but were discontinued in 2020. The Truth 50.11 is an exact replacement, and it ships with the 12614 or 12616 Encore Handle and Cover.
Common numbers sometimes found on this operator are 31876 and 41011.
>WI5001 -
-
Truth 11.12 Awning Operator 30896 31706
Truth 11.12 Awning Operator 30896 31706
Attaches to window on one point.
16-1/2" spread with in the closed positon.
Common number found on the operator is 30896 and 31706
The Wi11454 handle in matching color is included with the operator, along with the Wi20008 Sash Hook.
Color Chart
WI1112 -
4 Bar Window Hinge A.W. Anderberg 77AL
A.W. Anderberg 77AL 4 Bar Window HInge, Aluminum Construction
29/32" track wide x 11/16" stack height
Found in commercial aluminum framed hopper windows.
10", 12" and 14" only, if you have an older larger size, please use the A.W. Anderberg 301ST or A.W. Anderberg 301SS as a replacement. You might have to shim the tracks in these cases, because the stack height is lower on the steel and stainless steel hinges. A.W. Anderberg no longer makes the larger sizes of the Aluminum Hinges due to the brittle nature of aluminum.
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
6-20-2012 No longer manufactured, what we have in stock, is what we have. You will have to replace with 301ST or 301SS Hinges
77AL-XX -
Truth Casement Handle 24.23
The Truth Casement Handle 24.23 is used on many aluminum, vinyl and wood windows manufactured from the 1970's. This handle is the same as the C1729, but the lock up dimension is 1/2". The lock up dimension is the distance from the back of the handle mounting plate to the inside surface of the hook when it is closed. The center to center dimension on the mounting plate is 2-3/8". The handle features die cast construction, and is then powder coated to the desired finish. White is in stock, call for other colors.
Truth Part # 24.23.xx.200 , were the xx is the finish code.
WI2423- -
4 Bar Window Hinge A.W. Anderberg 201SS
A.W. Anderberg 201SS 4 bar window hinge, stainless steel construction.
Usually found on light commercial or residential buildings with hopper windows.
23/32" track width x 1/2" stack height.
If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.
Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.
201SS-XX -
Project In Truth Handle-1-1/2" -7/16" Lock Up
The Project In Truth Handle-1-1/2" -7/16" Lock Up is a handle we have seen since the 1970's. This window handle features a 1-1/2" hole spacing on centers with a 7/16" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. It is used on Project In or Thru Rail Hopper style windows. We stock the Bronze color, but other colors are available, call for more information.
Right hand handle is shown in the picture.
P2731 -
Project-In Window Handle With Ring Pull 1-1/2"
Project In Handle With Ring Pull 1-1/2"
This is a very popular window handle. The handles has a hole spacing of 1-1/2" with a 7/16" lock up. This is used for a replacement for many manufactures. This handle is constructed of cast white bronze with a brushed nickel finish.
P4908RP -
Truth 12614 and 12616 Encore Handle and Cover
The Truth Encore Handle and Cover are used on the Encore Operators Wi5110 and Wi5010. The flush design is ideal when you have curtains and blinds on your window. The cover are constructed on Plastic and the Handles are die cast metal. Use the drop down menu to figure out hand, the color is not correct by the handing is, select color and then hand.
Color Chart
Truth Part Numbers 12614 (Left Hand) and 12616 (Right Hand).
Wi126XX -
Casement Operator 11" Arm
Casement Window Operator 11" Arm
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
RO269-70 -
Truth Awning Operator 11.10 30895
Truth Awning Operator 11.10 30895 is the most common of all the Truth Awning Operators. The arms stretch 21-1/2" in the closed position. If you arms stretch 16-1/8" order Wi1112. If your arms stretch 11-3/8" order the Wi1130.
Common numbers sometimes found on this operator are 40510, 40511, 31703 30895, 30895a and 31704. You may see just one or a couple of them on it.
The Wi11454 handle in matching color is included with the operator along with the Sash Hook Wi20008.
Color Chart
WI1110 -
Truth 45145 Plastic Tie Bar Guide
Truth 45145 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi45145 -
Truth Entrygard Operator - Stainless Steel 4-7/16
Truth Entrygard Dual Arm Window Operator. This operator is the same as the Wi1510, except are arms are made of stainless Steel
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Common numbers found on this operator are 30758 RH , 30757 LH, 30514, 30852, 20812, and 30767
Left hand shown.
Window Operator Handing
WI1514 -
Tube Balances 83 Series - 3/8" Diameter Tube
83 Series Tube Balances - 3/8" Diameter
See Attached pdf, for more information.
WI83xxc -
4 Bar Window Hinge A. W. Anderberg 301ST
A.W. Anderberg 301ST Cadnium Plated Steel HInge
Usually used on commercial hopper windows. If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges. This hinge has been discontinued, and is replaced by the 301SS hinge, which has the same hole spacing, length, and stack height.
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301ST-XX