Search results for: '31538+4'
-
Fenestra Window Operator 3-1/4"
The Fenestra Window Operator 3-1/4" is a replica of a version made in the 1920's to 1950's. This version is made of a die cast material, that is then powder coated in an aluminum finish. If you want bronze color, your best bet is to purchase some bronze spray paint and paint them. Ships with mounting screws and handle.
Left hand shown in pictureHanding Diagram
RO727- -
Casement Operator 11" Arm
Casement Window Operator 11" Arm
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
RO269-70 -
Truth Skylight Operator-Straight Drive-42.75
The Truth Skylight Operator-Straight Drive-4275 is easy to install on wood, metal or vinyl skylights. Gear reduction provides needed lift for sash weights up to 140 lbs. Steel chain is detachable at the sash for easy maintenance. The housing measures 2-3/4" wide by 10-3/4" long with a thickness of 7/8". We find the number 40966 on the back cover.
wi4275- -
Truth Skylight Operator-Angle Drive 42.65
The Truth Skylight Operator-Angle Drive 4265 is easy to install on wood, metal or vinyl skylights. Gear reduction provides needed lift for sash weights up to 140 lbs. Steel chain is detachable at the sash for easy maintenance. The housing measures 2-3/4" wide by 10-3/4" long with a thickness of 7/8". We find the number 40966 stamped on the back cover.
Wi4265- -
Truth Awning Operator 22.21
Truth Awning Operator 22.21
The arms stretch 21-1/2" across in the closed position. The housing is front side mounted with 4 screws. The spacing on the outside screws are 7" on center, and 6" on the inter screws.
The Wi11454 handle in matching color is included with the operator along with the Sash Hook Wi20008.
Color Chart
Wi2221- -
Split Arm Roto Operator
The Split Arm Roto Operator has been around for the past 10-15 years. The housing is 4-1/2" wide, and the linkage arm has an overall length of 4-3/8". One of the most recognizable features of this mechanism is the female hex fitting for the handle.
Right Hand shown in the picture
Wi21339- -
4 Bar Window Hinge A. W. Anderberg 301ST
A.W. Anderberg 301ST Cadnium Plated Steel HInge
Usually used on commercial hopper windows. If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges. This hinge has been discontinued, and is replaced by the 301SS hinge, which has the same hole spacing, length, and stack height.
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301ST-XX -
Casement Window Operator 9" Arm
Casement Window Operator 9" Arm
Replacement Casement Window Operator is made of a die cast housing and steel arm. The window operator housing has 4 mounting holes, 4-3/4" are the outside dimensions of the outside screws and 3-7/8" on the inside screws.
Right Hand Operator Shown in picture
Handing Diagram
RO392 -
-
Truth 11" Surface Mounted Operator
Truth 11" Surface Mounted Operator
This Truth Surface Mounted Window Operator is usually used on commercial aluminum windows. It features an 11" long arm, measured from the center of the housing to the center of the metal roller. The outside mounting screw holes are 4-3/4" a part and the inter screws are 3-7/8" on center.
Right Hand Shown, in Aluminum
Right Hand Aluminum Wi36223AL
Left Hand Aluminum Wi36222AL
Right Hand Bronze Wi36223BR
Left Hand Bronze Wi36222BR
Right Hand White Wi36223W
Left Hand White Wi36222WWi3622X -
Casement Operator 9" Arm
Casement Window Operator 9" Arm
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 9" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
Ro267 Right Hand
Ro268 Left HandHanding Diagram
RO267-8 -
Truth 30568 Awning Operator Guide Bar
Awning Operator Guide Bar 30568
The Truth Operator Guide Bar measures 26-3/4" long with the two mounting holes at 26-1/8" on centers. The bar is constructed of extruded aluminum. The Wi10005 is the component that slides in this track. This track is mounted to the sash.
Truth Part # 30568
Wi30568 -
Truth Entrygard 11.43 Awning Operator 31545
Truth Entrygard 11.43 Awning Operator 31545
Arms are 8-3/8" long, and measures 20-3/4" across when the arms are in the closed position.
Awing Operator, we usually find 31545 stamped on the arm, they used to be a cadmium plated steel, now they are powder coated. We also find 21221 on it.
WI1143 -
Window Handle Angle Base 1-3/8" Truth
Angle Base 1-3/8" Window Handle Truth
Also known as the Truth 25.39, this handle is constructed of a die cast metal and powder coated to the desired color. The distance between the screws is 1-3/8" on center. The handle measures 3-3/4" long, base measures 2-1/8" long. The number found on the handle is 45086 for the Right Hand, and 45085 for the Left Hand. We also find U.S. Pat. # 4,930,820
Right Hand is shown in picture.
T266- -
Truth 14" Awning Hinge 13.14 30128 30127
Truth 13.14 Awning Window Hinge.
The track measures 14" long, and is 11-16" wide. The stack height is 1/2". The arm marked 30128 is 6-3/4" long. And the arm stamped 30127 is 8" long. This hinge is constructed of steel that is powder coated in a tanish gray color. The common numbers found stamped on this hinge are 30128 and 30127
Sold in pairs
WI1314 -
Truth Casement Limit Device 99.20
The Truth Casement Limit Device 99.20 is designed to stop the window from opening too far, and prevent people from falling out of an elevated window. The device is constructed of stainless steel and steel. The Track measures 4-5/8" long, while the arm measures 6" overall length. In many jurisdictions this product or similar products are required by law.
WI9920LMT