Search results for: '31538+casement+operator+1'
- Related search terms
- 31538+casement+operator+149 152
- 31538+casement+operator+14 154
-
Casement Roto Operator
Casement Roto Operator
This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes. The housing is contructed of die case metal that is electro-statically painted. The housing is 5-1/2" wide. The optional handle fits the 5/16" Hex Shaft.
Left Hand Shown in picture
Wi21062- -
Casement Window Operator 9" Arm
Casement Window Operator 9" Arm
Replacement Casement Window Operator is made of a die cast housing and steel arm. The window operator housing has 4 mounting holes, 4-3/4" are the outside dimensions of the outside screws and 3-7/8" on the inside screws.
Right Hand Operator Shown in picture
Handing Diagram
RO392 -
Casement Operator 11" Arm
Casement Window Operator 11" Arm
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
RO269-70 -
Casement Operator 9" Arm
Casement Window Operator 9" Arm
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 9" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
Ro267 Right Hand
Ro268 Left HandHanding Diagram
RO267-8 -
Split Arm Roto Operator
The Split Arm Roto Operator has been around for the past 10-15 years. The housing is 4-1/2" wide, and the linkage arm has an overall length of 4-3/8". One of the most recognizable features of this mechanism is the female hex fitting for the handle.
Right Hand shown in the picture
Wi21339- -
-
Two Hole 1-1/2" Wedgeless Cam Handle
Two Hole 1-1/2" Wedgeless Cam Handle
Hinged flap rolls down and locks the window shut. We find this window handle is used alot in the western states. The older version had a 1-3/8" hole spacing, but the new one has 1-1/2" hole spacing.
Sometimes we find the number R and 1 on the flap and DISCO cast in on the back of the handle.
White only!
Wi32552- -
Two Hole Cam Handle 1-1/2" 9/32" Lock Up
The Two Hole Cam Handle 1-1/2" 9/32" Lock Up is is constructed cast white bronze with a brushed nickel finish. This handle is the same as the T1015, but with an 1-1/2" hole spacing. The 9/32" is the distance from the mounting plate bottom to the bottom of the handle. We find this handle on awning and hopper style windows.
Right Hand Shown in Picture
T1025 -
Two Hole Cam Handle 1-3/8" 5/16" Lockup With Ring Pull
Two Hole 1-3/8" Window Handle 5/16" Lockup With Ring Pull
This window handle features a 1-3/8" hole spacing, a 5/16" lock up dimension and a ring pull for elevated windows. This handle is cast white bronze construction with a brushed nickel finish.
Right Hand Shown
T3080 -
Project In Handle 1-3/8"
The Project In Handle 1-3/8" is one of our most popular window handles. We find it used on commercial hopper style windows. This handle is sometimes called a Project In or Thru Rail window handle. This window handle has a hole spacing of 1-3/8" with a 7/16" lock up, C dimension in diagram below. The handle is constructed of cast white bronze with a brushed nickel finish.
P4907