Search results for: 'casement window operator left handle part cah 104r'

Pella Casement Operator

Left Hand Shown

Casement Window Operator 11" Arm

Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.

The Fenestra Casement Handle is very common on Fenestra Windows made in the 1950's.  Common markings on this handle are 2845 and Fenestra.  The handle has a 2-5/8" center to center dimension on the mounting holes, with a 9/16" lock up.  Cast white bronze construction with a brushed nickel finish.

Right hand shown

Casement Window Operator 9" Arm

Replacement Casement Window Operator is made of a die cast housing and steel arm. The window operator housing has 4 mounting holes, 4-3/4" are the outside dimensions of the outside screws and 3-7/8" on the inside screws.

Right Hand Operator Shown in picture

Handing Diagram

Truth Window Operator 15.59

Same as the Wi1531 but with Metal 9/16" roller. Ships with matching handle.

Color Chart

Window Operator Handing

Pella Casement Window Operator

Left hand shown in picture

Casement Roto Operator

This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes.  The housing is contructed of die case metal that is electro-statically painted.   The housing is 5-1/2" wide.  The optional handle fits the 5/16" Hex Shaft.

Left Hand Shown in picture

Casement Window Operator 9" Arm

Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 9" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.

Ro267 Right Hand
Ro268 Left Hand

Handing Diagram

The Fenestra Window Operator 3-1/4" is a replica of a version made in the 1920's to 1950's. This version is made of a die cast material, that is then powder coated in an aluminum finish. If you want bronze color, your best bet is to purchase some bronze spray paint and paint them. Ships with mounting screws and handle.

Handing Diagram

Fenestra Windows Casement Handle

Stamped steel construction, 2-5/8" center to center mounting holes

Used on steel framed Fenestra Windows

Right Hand Shown in Picture

Casement Window Handle-2-5/16"

This casement handle has a 2-5/16" hole spacing with a 1/2" lock up dimension (back of handle to inside of hook). The handle is constructed of cast white bronze with a brushed nickel finish

Casement Window Handle-2-3/8"

The hole spacing is 2-3/8" between screws and has a 1/2" lock up (distance between inside of cup to back of handle). Cast white bronze with a brushed nickel finish.

Right hand shown

Fenestra Window Operator 5-1/4

The arm is 9" long and the outside screw spacing is 5-1/4". The inside threaded holes are 4-1/4" apart. Die cast construction with steel arm. Ships with handle and mounting screws.

Handing Diagram

Pella Casement Operator Cover

Right hand shown in Copperite

Truth Window Operator 59.05 Split Arm

This operator is sometimes a replacement for the Wright Split Arm Operator.

White and Gold only

Common number found on this part is 21550
On the Wright Window Operator we might find a 07900 stamped on the arm.

Window Operator Handing

Color Chart

Truth Window Operator 7-1/2"

7-1/2" long arm. Ships with matching handle.

Truth Part # 15.56

Bronze only

Pella Casement Operator Cover

Right Hand Cover Shown

The Truth Casement Handle 24.23 is used on many aluminum, vinyl and wood windows manufactured from the 1970's.  This handle is the same as the C1729, but the lock up dimension is 1/2".  The lock up dimension is the distance from the back of the handle mounting plate to the inside surface of the hook when it is closed.  The center to center dimension on the mounting plate is 2-3/8".  The handle features die cast construction, and is then powder coated to the desired finish. White is in stock, call for other colors.

Truth Part # 24.23.xx.200 , were the xx is the finish code.

Truth 10579 Window Operator Handle

We some times find the number 45054 cast in the back side of this handle.  This handle fits all Truth Operators with a 11/32" spline, which is all of them made after 1975.

Truth part # 10579.xx were xx is the color code

Color Chart

Casement Window Handle-2-3/8"

Cast white bronze with a brushed nickel finish.   The hole spacing is 2-3/8" between holes with a lock up dimension of 1/2".

Truth 23.01 Single Arm Front Mounting

9-1/2" arm

Left Hand Shown in picture

Color Chart

Handing Diagram

Window Handle Casement Upper Handle 2-3/8"

Cast white bronze with a brushed nickel finish.  The hole spacing is 2-3/8" with a 1/2" lock up dimension (distance from back of handle to the inside of the hook).

The Truth Encore Handle and Cover are used on the Encore Operators Wi5110 and Wi5010.  The flush design is ideal when you have curtains and blinds on your window.  The cover are constructed on Plastic and the Handles are die cast metal.  Use the drop down menu to figure out hand, the color is not correct by the handing is, select color and then hand.

Color Chart

Truth Part Numbers 12614 (Left Hand) and 12616 (Right Hand).

Truth Split Arm Operator 31850

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.

Left hand shown. White and Coppertone only

Common numbers found on this operator is 31850

Window Operator Handing

Color Chart

Casement Window Handle Keeper Double Side

2-5/16" hole spacing x 5/8" wide

Stamped aluminum construction

Generic 3/8 inch spline crank handle, white only.

The Fenestra Window Operator 4-1/4" was used between 1930 to 1970.  The operator features die cast metal construction with a steel arm.   The original version was made of cast bronze, which in today's market would be cost prohibitive.  This unit ships with handle and mounting screws.

Right Hand Operator shown in picture.

Handing Diagram

Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755.  Call or email for quantity "Discount Codes".

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

3-3/4" link dimension, offset up. For offset down order Wi1520

Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

PART # HAND

WI1516R RIGHT HAND-Shown Below

WI1516L LEFT HAND-Shown Below

Truth Operator 13-1/2"

Truth Single Arm Window Operator. This new style replaces the older traditional size shown in the diagrams.

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

We sometimes find 45251 cast on the housing, and 40051 and 40052 stamped on the arm

Left hand shown. The Wi11454 handle in matching color is included with the operator.

Window Operator Handing

Color Chart

The Truth Casement Handle Aluminum-2-3/8" is used on many aluminum windows manufactured from the 1970's.  This handle is the same as the Wi2423, but the lock up dimension is 3/8".  The lock up dimension is the distance from the back of the handle mounting plate to the inside surface of the hook when it is closed.  The handle features die cast construction, and is then powder coated to the desired finish.  Aluminum and white in stock, call for other colors.

5/16" Spline Window Operator T Handle.

Replace regular crank handles with this compact T handle. Also known as a Butterfly Handle.

Truth 23.54 Window Operator 30866

A common number found on this operator is 30866

4-1/2" long linkage arm, Ships with matching handle.

Window Operator Handing

Color Chart

Truth Entrygard Dyad Operator 20810. The 15.62 is no longer manufactured, we can not get the Right Hand anymore, but have a decent supply of Left Hand's.

Same as the Wi1511, but linkage arm is off set up

Linkage arm stamped 20810A, gear stamped 31367L, base stamped 45108

4-7/16" link dimension, offset up. For offset down, order Wi1511.

Window Operator Handing

Truth Split Arm Operator 15.26

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.

Left hand shown. White and Bronze only

Color Chart

Window Operator Handing

Truth Entrygard Dual Arm Operator. We would expect you to find 20748 on the linkage arm, which measures 2-7/8" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20748.  Call or email for quantity "Discount Codes".

2-7/8" linkage dimension, off set up.

Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

Left hand shown in main picture.

PART # HAND
WI1515R RIGHT HAND-Shown Below

WI1515L LEFT HAND-Shown Below