Search results for: '31538 casement operator'

Pella Casement Operator

Left Hand Shown

Pella Casement Operator

Replacement Pella Casement Window Operator

Left Hand Operator shown on Picture

Casement Window Operator 11" Arm

Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.

Pella Casement Window Operator

Left hand shown in picture

Casement Roto Operator

This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes.  The housing is contructed of die case metal that is electro-statically painted.   The housing is 5-1/2" wide.  The optional handle fits the 5/16" Hex Shaft.

Left Hand Shown in picture

Pella Casement Operator Cover

Right hand shown in Copperite

Casement Window Operator 9" Arm

Replacement Casement Window Operator is made of a die cast housing and steel arm. The window operator housing has 4 mounting holes, 4-3/4" are the outside dimensions of the outside screws and 3-7/8" on the inside screws.

Right Hand Operator Shown in picture

Handing Diagram

Casement Window Operator 9" Arm

Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 9" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.

Ro267 Right Hand
Ro268 Left Hand

Handing Diagram

Pella Casement Operator Cover

Right Hand Cover Shown

The Fenestra Window Operator 3-1/4" is a replica of a version made in the 1920's to 1950's. This version is made of a die cast material, that is then powder coated in an aluminum finish. If you want bronze color, your best bet is to purchase some bronze spray paint and paint them. Ships with mounting screws and handle.

Handing Diagram

Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755.  Call or email for quantity "Discount Codes".

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

3-3/4" link dimension, offset up. For offset down order Wi1520

Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

PART # HAND

WI1516R RIGHT HAND-Shown Below

WI1516L LEFT HAND-Shown Below

Truth Window Operator 15.59

Same as the Wi1531 but with Metal 9/16" roller. Ships with matching handle.

Color Chart

Window Operator Handing

Truth Entrygard Dual Arm Operator. We would expect you to find 20748 on the linkage arm, which measures 2-7/8" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20748.  Call or email for quantity "Discount Codes".

2-7/8" linkage dimension, off set up.

Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

Left hand shown in main picture.

PART # HAND
WI1515R RIGHT HAND-Shown Below

WI1515L LEFT HAND-Shown Below

Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the bottom of the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755.  Call or email for quantity "Discount Codes".

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

3-3/4" link dimension, offset down. For offset up order Wi1516

Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

Left hand shown.

PART # HAND

WI1520R RIGHT HAND-Shown Below

WI1520L LEFT HAND-Shown Below

Casement Window Handle-2-5/16"

This casement handle has a 2-5/16" hole spacing with a 1/2" lock up dimension (back of handle to inside of hook). The handle is constructed of cast white bronze with a brushed nickel finish

Truth Entrygard Dual Arm Operator. We would expect you to find 20810 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Also known as a TH-23076 or TH-23077.

4-7/16" link dimension, offset up. For offset down, order Wi1561.

Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

MOST POPULAR SIZE

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

PART # HAND

WI1510R RIGHT HAND-Shown Below

WI1510L LEFT HAND-Shown Below

Truth 23.01 Single Arm Front Mounting

9-1/2" arm

Left Hand Shown in picture

Color Chart

Handing Diagram

The Fenestra Casement Handle is very common on Fenestra Windows made in the 1950's.  Common markings on this handle are 2845 and Fenestra.  The handle has a 2-5/8" center to center dimension on the mounting holes, with a 9/16" lock up.  Cast white bronze construction with a brushed nickel finish.

Right hand shown

Truth 21088 Casement Window Keeper

This Truth Window Casement Strike is 4-5/8" long and made of stamped steel.

Fenestra Window Operator 5-1/4

The arm is 9" long and the outside screw spacing is 5-1/4". The inside threaded holes are 4-1/4" apart. Die cast construction with steel arm. Ships with handle and mounting screws.

Handing Diagram

Truth Entrygard Dyad Operator 20810. The 15.62 is no longer manufactured, we can not get the Right Hand anymore, but have a decent supply of Left Hand's.

Same as the Wi1511, but linkage arm is off set up

Linkage arm stamped 20810A, gear stamped 31367L, base stamped 45108

4-7/16" link dimension, offset up. For offset down, order Wi1511.

Window Operator Handing

Casement Sash Lock

Plastic construction Sash Lock.

White only

Roto Casement Sash Lock

Housing measures x 4-3/4" tall by x 3/4" wide. The hole spacing is 3-15/16" center to center. The lifting finger projects out 1-1/8"" with the cut out measuring 11-16" deep by 5/16".

Casement Window Handle-2-3/8"

Cast white bronze with a brushed nickel finish.   The hole spacing is 2-3/8" between holes with a lock up dimension of 1/2".

Truth Entrygard Dual Arm Operator. We would expect you to find 20810 or 20544 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544.  Call or email for quantity "Discount Codes".

For offset up, order Wi1510.

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

PART # HAND
WI1561R RIGHT HAND-Shown Below

WI1561L LEFT HAND-Shown Below

The Fenestra Window Operator 4-1/4" was used between 1930 to 1970.  The operator features die cast metal construction with a steel arm.   The original version was made of cast bronze, which in today's market would be cost prohibitive.  This unit ships with handle and mounting screws.

Right Hand Operator shown in picture.

Handing Diagram

Window Handle Casement Upper Handle 2-3/8"

Cast white bronze with a brushed nickel finish.  The hole spacing is 2-3/8" with a 1/2" lock up dimension (distance from back of handle to the inside of the hook).

The Truth Casement Handle Aluminum-2-3/8" is used on many aluminum windows manufactured from the 1970's.  This handle is the same as the Wi2423, but the lock up dimension is 3/8".  The lock up dimension is the distance from the back of the handle mounting plate to the inside surface of the hook when it is closed.  The handle features die cast construction, and is then powder coated to the desired finish.  Aluminum and white in stock, call for other colors.

Casement Window Handle Keeper Double Side

2-5/16" hole spacing x 5/8" wide

Stamped aluminum construction

Truth 30238 Window Keeper

This Truth Window Keeper is used on Casement Window Handles. The keeper is 2" wide and is adjustable. It is made of stamped steel.

Fenestra Windows Casement Handle

Stamped steel construction, 2-5/8" center to center mounting holes

Used on steel framed Fenestra Windows

Right Hand Shown in Picture

Casement Window Handle-2-3/8"

The hole spacing is 2-3/8" between screws and has a 1/2" lock up (distance between inside of cup to back of handle). Cast white bronze with a brushed nickel finish.

Right hand shown

The Truth Casement Limit Device 99.20 is designed to stop the window from opening too far, and prevent people from falling out of an elevated window.  The device is constructed of stainless steel and steel.  The Track measures 4-5/8" long, while the arm measures 6" overall length.  In many jurisdictions this product or similar products are required by law.

The Truth Casement Handle 24.23 is used on many aluminum, vinyl and wood windows manufactured from the 1970's.  This handle is the same as the C1729, but the lock up dimension is 1/2".  The lock up dimension is the distance from the back of the handle mounting plate to the inside surface of the hook when it is closed.  The center to center dimension on the mounting plate is 2-3/8".  The handle features die cast construction, and is then powder coated to the desired finish. White is in stock, call for other colors.

Truth Part # 24.23.xx.200 , were the xx is the finish code.

The Truth 14.80 hinge is a Stainless Steel copy of the the most common of the Truth Casement Hinge, the 14.75. The stainless steel track is 10" long, the glide is a plastic coated steel. The most common problem on this hinge is the shoe. 

This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.

This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.