Search results for: '30842 lever operator for jeld week clay window'
- Did you mean
- 30842 lever operator for jeld when clay window 0
- Related search terms
- window tentry good 30895 301
- window truth goods 31879 301
- window+truth+entry+good+30895a 301
- window truth goods 30591 301
- window+truth+entry+good+30645 301
- window+truth+30851entry+goods+30645 301
- window+truth+good+30591 301
- window+tentry+good+30842 301
- window+truth+30851entry+good+31879 301
- window tentry goods 31876 301
-
Fenestra Window Operator 4-1/4"
The Fenestra Window Operator 4-1/4" was used between 1930 to 1970. The operator features die cast metal construction with a steel arm. The original version was made of cast bronze, which in today's market would be cost prohibitive. This unit ships with handle and mounting screws.
Right Hand Operator shown in picture.
Handing Diagram
RO162 -
Dual Arm Truth Maxim Operator 50.10
Dual Arm Truth Maxim Operator 50.10
The Truth 50.10 Maxim Dual Arm is one of the more popular new style operators. This operator is the same as the 50.00, but without the painted steel cover riveted to it. Some numbers we find on this operator are 41011 and 31876.
Left Hand Operator shown in picture.
WI5010 -
Fenestra Window Operator 3-1/4"
The Fenestra Window Operator 3-1/4" is a replica of a version made in the 1920's to 1950's. This version is made of a die cast material, that is then powder coated in an aluminum finish. If you want bronze color, your best bet is to purchase some bronze spray paint and paint them. Ships with mounting screws and handle.
Left hand shown in pictureHanding Diagram
RO727- -
Truth Awning Operator 22.29 30896 31254 31255
Truth 22.29 Awning Operator
The Truth 22.29 is the rear mount awning operator, meaning the screws to mount it come in from the outside of the window frame. This usually means it is used on aluminum or vinyl clad windows. The arms measure 16-1/2" across in the closed position, or 16" elbow joint to elbow joint. The mounting screws are 7" on center. Common numbers found on the arms are 31254, 31255, and 30896. We only offer this operator in white.
Truth Part # 22.29.32.002
Wi2229- -
Truth Split Arm Operator 15.26
Truth Split Arm Operator 15.26
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.
Left hand shown. White and Bronze only
Color Chart
Window Operator Handing
WI1526 -
Truth 11" Surface Mounted Operator
Truth 11" Surface Mounted Operator
This Truth Surface Mounted Window Operator is usually used on commercial aluminum windows. It features an 11" long arm, measured from the center of the housing to the center of the metal roller. The outside mounting screw holes are 4-3/4" a part and the inter screws are 3-7/8" on center.
Right Hand Shown, in Aluminum
Right Hand Aluminum Wi36223AL
Left Hand Aluminum Wi36222AL
Right Hand Bronze Wi36223BR
Left Hand Bronze Wi36222BR
Right Hand White Wi36223W
Left Hand White Wi36222WWi3622X -
Truth Awning Operator 22.21
Truth Awning Operator 22.21
The arms stretch 21-1/2" across in the closed position. The housing is front side mounted with 4 screws. The spacing on the outside screws are 7" on center, and 6" on the inter screws.
The Wi11454 handle in matching color is included with the operator along with the Sash Hook Wi20008.
Color Chart
Wi2221- -
Split Arm Roto Operator
The Split Arm Roto Operator has been around for the past 10-15 years. The housing is 4-1/2" wide, and the linkage arm has an overall length of 4-3/8". One of the most recognizable features of this mechanism is the female hex fitting for the handle.
Right Hand shown in the picture
Wi21339- -
Casement Operator 9" Arm
Casement Window Operator 9" Arm
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 9" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
Ro267 Right Hand
Ro268 Left HandHanding Diagram
RO267-8 -
Truth Entrygard Dyad Operator 20810
Truth Entrygard Dyad Operator 20810. The 15.62 is no longer manufactured, we can not get the Right Hand anymore, but have a decent supply of Left Hand's.
Same as the Wi1511, but linkage arm is off set up
Linkage arm stamped 20810A, gear stamped 31367L, base stamped 45108
4-7/16" link dimension, offset up. For offset down, order Wi1511.
Window Operator Handing
Wi1562 -
Truth 30568 Awning Operator Guide Bar
Awning Operator Guide Bar 30568
The Truth Operator Guide Bar measures 26-3/4" long with the two mounting holes at 26-1/8" on centers. The bar is constructed of extruded aluminum. The Wi10005 is the component that slides in this track. This track is mounted to the sash.
Truth Part # 30568
Wi30568 -
Truth Entrygard 11.43 Awning Operator 31545
Truth Entrygard 11.43 Awning Operator 31545
Arms are 8-3/8" long, and measures 20-3/4" across when the arms are in the closed position.
Awing Operator, we usually find 31545 stamped on the arm, they used to be a cadmium plated steel, now they are powder coated. We also find 21221 on it.
WI1143 -
Truth Entrygard Awning Operator 11.44 21221
Truth Entrygard Awning Operator 11.44 21221
Arms are 13-3/8" long, and the span of the arms when in the closed position, arms opposing each other, is 28-1/8" (Hole to Hole)
Awing Operator, we usually find 40759, 40760, and 21221 stamped on the arms, they used to be a cadmium plated steel, now they are powder coated.
WI1144 -
-
Truth 11.12 Awning Operator 30896 31706
Truth 11.12 Awning Operator 30896 31706
Attaches to window on one point.
16-1/2" spread with in the closed positon.
Common number found on the operator is 30896 and 31706
The Wi11454 handle in matching color is included with the operator, along with the Wi20008 Sash Hook.
Color Chart
WI1112 -
Truth Skylight Operator-Straight Drive-42.75
The Truth Skylight Operator-Straight Drive-4275 is easy to install on wood, metal or vinyl skylights. Gear reduction provides needed lift for sash weights up to 140 lbs. Steel chain is detachable at the sash for easy maintenance. The housing measures 2-3/4" wide by 10-3/4" long with a thickness of 7/8". We find the number 40966 on the back cover.
wi4275- -
Casement Operator 11" Arm
Casement Window Operator 11" Arm
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
RO269-70