Search results for: '30842+lever+operator+for+jeld+we+casement+window'

Truth 10.11 Lever Operator Double Pull Less Than 2"

Handle assembly projects less than 2"

Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755.  Call or email for quantity "Discount Codes".

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

3-3/4" link dimension, offset up. For offset down order Wi1520

Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

PART # HAND

WI1516R RIGHT HAND-Shown Below

WI1516L LEFT HAND-Shown Below

Truth Entrygard Dual Arm Operator. We would expect you to find 20748 on the linkage arm, which measures 2-7/8" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20748.  Call or email for quantity "Discount Codes".

2-7/8" linkage dimension, off set up.

Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

Left hand shown in main picture.

PART # HAND
WI1515R RIGHT HAND-Shown Below

WI1515L LEFT HAND-Shown Below

Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the bottom of the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755.  Call or email for quantity "Discount Codes".

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

3-3/4" link dimension, offset down. For offset up order Wi1516

Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

Left hand shown.

PART # HAND

WI1520R RIGHT HAND-Shown Below

WI1520L LEFT HAND-Shown Below

Truth 10.11 Lever Window Operator Double Pull More Than 2"

Handle assembly projects more than 2"

Pella Casement Operator

Left Hand Shown

Truth Window Operator 59.05 Split Arm

This operator is sometimes a replacement for the Wright Split Arm Operator.

White and Gold only

Common number found on this part is 21550
On the Wright Window Operator we might find a 07900 stamped on the arm.

Window Operator Handing

Color Chart

Truth 10.10 Lever Operator Single Pull Less Than 2"

Less than 2" projection.

Attaches to window at one point.

Includes sash hook.

Truth 10.10 Lever Operator Single Pull More than 2"

More than 2" projection.

Attaches to window at one point.

Includes sash hook.

Truth Entrygard Dual Arm Operator. We would expect you to find 20810 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Also known as a TH-23076 or TH-23077.

4-7/16" link dimension, offset up. For offset down, order Wi1561.

Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

MOST POPULAR SIZE

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

PART # HAND

WI1510R RIGHT HAND-Shown Below

WI1510L LEFT HAND-Shown Below

Casement Window Operator 9" Arm

Replacement Casement Window Operator is made of a die cast housing and steel arm. The window operator housing has 4 mounting holes, 4-3/4" are the outside dimensions of the outside screws and 3-7/8" on the inside screws.

Right Hand Operator Shown in picture

Handing Diagram

Pella Casement Window Operator

Left hand shown in picture

Truth Entrygard Dual Arm Operator. We would expect you to find 20810 or 20544 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544.  Call or email for quantity "Discount Codes".

For offset up, order Wi1510.

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

PART # HAND
WI1561R RIGHT HAND-Shown Below

WI1561L LEFT HAND-Shown Below

Pella Casement Operator

Replacement Pella Casement Window Operator

Left Hand Operator shown on Picture

Casement Window Operator 11" Arm

Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.

Truth Window Operator 15.59

Same as the Wi1531 but with Metal 9/16" roller. Ships with matching handle.

Color Chart

Window Operator Handing

Casement Window Operator 9" Arm

Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 9" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.

Ro267 Right Hand
Ro268 Left Hand

Handing Diagram

The Roto Folding Handle for Pro Drive Operators features die cast construction, and powder coated finish.   The hex is 5/16", and the handle has a overall length of 4-1/4".

Casement Roto Operator

This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes.  The housing is contructed of die case metal that is electro-statically painted.   The housing is 5-1/2" wide.  The optional handle fits the 5/16" Hex Shaft.

Left Hand Shown in picture

Pella Casement Operator Cover

Right hand shown in Copperite

The Fenestra Window Operator 3-1/4" is a replica of a version made in the 1920's to 1950's. This version is made of a die cast material, that is then powder coated in an aluminum finish. If you want bronze color, your best bet is to purchase some bronze spray paint and paint them. Ships with mounting screws and handle.

Handing Diagram

Truth Entrygard Dyad Operator 20810. The 15.62 is no longer manufactured, we can not get the Right Hand anymore, but have a decent supply of Left Hand's.

Same as the Wi1511, but linkage arm is off set up

Linkage arm stamped 20810A, gear stamped 31367L, base stamped 45108

4-7/16" link dimension, offset up. For offset down, order Wi1511.

Window Operator Handing

Sweep Lock for Aluminum Windows

Made die cast metal, unfinished. Lock measures 1-5/8" x 15/16" x 3/8" projection. Available in left and right versions, the Right Hand version is shown in the picture. This lock is found on aluminum framed windows. Ships with Latch and Nylon Bushing, the screw is not included.

Pella Casement Operator Cover

Right Hand Cover Shown

Casement Window Handle-2-5/16"

This casement handle has a 2-5/16" hole spacing with a 1/2" lock up dimension (back of handle to inside of hook). The handle is constructed of cast white bronze with a brushed nickel finish

Peachtree Window Operator Handle for the Wi9009834, available in White or Driftwood.

The Truth Skylight Operator-Straight Drive-4275 is easy to install on wood, metal or vinyl skylights. Gear reduction provides needed lift for sash weights up to 140 lbs. Steel chain is detachable at the sash for easy maintenance. The housing measures 2-3/4" wide by 10-3/4" long with a thickness of 7/8". We find the number 40966 on the back cover.

The Fenestra Casement Handle is very common on Fenestra Windows made in the 1950's.  Common markings on this handle are 2845 and Fenestra.  The handle has a 2-5/8" center to center dimension on the mounting holes, with a 9/16" lock up.  Cast white bronze construction with a brushed nickel finish.

Right hand shown

The Truth Casement Handle Aluminum-2-3/8" is used on many aluminum windows manufactured from the 1970's.  This handle is the same as the Wi2423, but the lock up dimension is 3/8".  The lock up dimension is the distance from the back of the handle mounting plate to the inside surface of the hook when it is closed.  The handle features die cast construction, and is then powder coated to the desired finish.  Aluminum and white in stock, call for other colors.

The Truth-Wright Split Arm Operator is a replacement for the older Wright Operators.  Linkage arm has an overall length of 3-5/8".

Left Hand Shown in Picture, we can only get these in white.

The Truth Skylight Operator-Angle Drive 4265 is easy to install on wood, metal or vinyl skylights. Gear reduction provides needed lift for sash weights up to 140 lbs. Steel chain is detachable at the sash for easy maintenance. The housing measures 2-3/4" wide by 10-3/4" long with a thickness of 7/8". We find the number 40966 stamped on the back cover.

Dual Arm Truth Maxim Operator - 41011 31876-Discontinued in June 2019, we still may have some left, but are shipping the Wi5010, with matching color Flip and Fold Style handle and cover, they are the same operator without the metal cover.

7/31/2019 we are out of the Coppertone, we will be shipping the Wi5010 and matching finish handle and cover.
8/14/2019 we are out of the Bronze, we will be shipping the Wi5010 and matching finish handle and cover.
9/16/2019 we are out of the White, we will be shipping the Wi5010 and matching finish handle and cover.
11/13/2019 we are out the Gold, we will be shipping the Wi5010 and matching finish handle and cover.
4/6/2020 we are out the Beige, we will be shipping the Wi5010 and matching finish handle and cover.
3/17/2021 we are out the Clay, we will be shipping the Wi5010 and matching finish handle and cover.

The Truth 50.00 Maxim Dual Arm is one of the more popular new style operators from Truth. They are only been around since 1999. Also known as a TH-24010, TH-24011, TH-24012, TH-24013, TH-24022, TH-24023, TH-24024, and TH-24025.

Common numbers sometimes found on this operator are 31876, 41011 and 41012.

Dual Arm Truth Maxim Operator 50.10

The Truth 50.10 Maxim Dual Arm is one of the more popular new style operators. This operator is the same as the 50.00, but without the painted steel cover riveted to it. Some numbers we find on this operator are 41011 and 31876.

Left Hand Operator shown in picture.

Truth 23.01 Single Arm Front Mounting

9-1/2" arm

Left Hand Shown in picture

Color Chart

Handing Diagram

Fenestra Window Operator 5-1/4

The arm is 9" long and the outside screw spacing is 5-1/4". The inside threaded holes are 4-1/4" apart. Die cast construction with steel arm. Ships with handle and mounting screws.

Handing Diagram