Truth

Truth 16.52 Sash Lock. A very common sash lock that tends to fail because the plastic slide breaks due to incorrect installation at the window manufacturer or being forced when there is a obstruction in the window opening. The new replacement model has a thicker plastic slide. Because the slide is thicker, the keeper, part # Wi41268 and Wi41269 might have to be shimmed with small washers.  The lock measures 2-5/16" between screws, 2-3/4" high by 2-3/16" deep and 1" thick.  Truth did make a Sash Lock that was similar to this one, but was 3-1/2" tall, that model has been discontinued.

Common numbers found on this sash lock are 21328 and 45189

Non handed (can be used on right or left hand windows).

Color Chart

Angle Base 1-3/8" Window Handle Truth

Also known as the Truth 25.39, this handle is constructed of a die cast metal and powder coated to the desired color. The distance between the screws is 1-3/8" on center. The handle measures 3-3/4" long, base measures 2-1/8" long. The number found on the handle is 45086 for the Right Hand, and 45085 for the Left Hand. We also find U.S. Pat. # 4,930,820

Right Hand is shown in picture.

Truth 20236 Inline Strike Housing

The Truth 20236 Strike Housing is used with the 20231, 20232 and 20233 Strike Inserts.   By selecting the proper Strike Insert you can control the height of the lock up.  The 20236 is an In Line Strike, meaning the mounting holes of the strike line up with the center line of the strike.  The mounting holes are 1-1/2" on center, and the housing measures 5/8" wide by 2-1/16" long.

Truth Part # 20236.xx  where xx is the finish

Color Chart

Truth Offset Strike Housing 20237 are now only available in Black

The Truth 20237 Strike Housing is used with the 20231, 20232 and 20233 Strike Inserts.   By selecting the proper Strike Insert you can control the height of the lock up.  The 20237 is an Off Set Strike, meaning the mounting holes of the strike are off set to the center line of the strike.  The holes are 1-1/2" on center, and the housing measures 5/8" wide by 2-1/16".

Truth Part # 20237.xx  

Truth Entrygard 10796 Right Hand Bracket

This bracket is usually used on the Entrygard Dual Arm Operators. This bracket is what the linkage arm attaches to on the hinge side of the with.

Truth Entrygard 10795 Left Hand Bracket

This bracket is usually used on the Entrygard Dual Arm Operators. This bracket is what the linkage arm attaches to on the hinge side of the with.

Roto Casement Sash Lock

Housing measures x 4-3/4" tall by x 3/4" wide. The hole spacing is 3-15/16" center to center. The lifting finger projects out 1-1/8"" with the cut out measuring 11-16" deep by 5/16".

The Truth Encore Handle and Cover are used on the Encore Operators Wi5110 and Wi5010.  The flush design is ideal when you have curtains and blinds on your window.  The cover are constructed on Plastic and the Handles are die cast metal.  Use the drop down menu to figure out hand, the color is not correct by the handing is, select color and then hand.

Color Chart

Truth Part Numbers 12614 (Left Hand) and 12616 (Right Hand).

The Truth-Wright Split Arm Operator is a replacement for the older Wright Operators.  Linkage arm has an overall length of 3-5/8".

Left Hand Shown in Picture, we can only get these in white.

The Truth Entrygard 10584 Right Hand Bracket measures 2-3/4" x 1-3/8" x 1/2".  The mounting holes are 1-5/8" on center.

The Truth Entrygard 10583 Left Hand Bracket measures 2-3/4" x 1-3/8" x 1/2".  The mounting holes are 1-5/8" on center.

The Truth 50.60 Encore Dyad Operator has been in production since about 1999.   In the beginning Truth offered the Maxim and the Encore Systems.   The Maxim is being phased out and the Encore is the only one made now.   The Encore will replace all of the Maxim operators, and have the same hole spacings and operation, but they have the interchangeable handle and covers.

The Operator in the Picture is a Left Hand.

Window Operator Handing

The Truth 22.18 Front Mount Awning Operator spreads 20-1/8 inches pin to pin on the arms when it is in the closed position. The Front Mount hole spaceing is 7 inches on the outside holes and 6 1/8 inches on the inside holes.

The Truth Maxim 32384 Track is used on for the 50.00, 50.10 and 52.01 operators. The track is unique so the square slide 31877 fits in there perfectly.  The track measures roughly 14-7/16" long with 4 mounting holes

Awning Operator Guide Bar 30568

The Truth Operator Guide Bar measures 26-3/4" long with the two mounting holes at 26-1/8" on centers. The bar is constructed of extruded aluminum. The Wi10005 is the component that slides in this track. This track is mounted to the sash.

Truth Part # 30568