Truth

Truth 11.14 Awning Operator 30897

Attaches to window at two points 9" apart. 25" spread with operator is in closed position. We some times see the numbers 40245, 30897 or 30897A stamped on the arms.

Sash Hooks and matching color handle included.

Color Chart

Truth Entrygard Awning Operator 11.44 21221

Arms are 13-3/8" long, and the span of the arms when in the closed position, arms opposing each other, is 28-1/8" (Hole to Hole)

Awing Operator, we usually find 40759, 40760, and 21221 stamped on the arms, they used to be a cadmium plated steel, now they are powder coated.

Truth Entrygard Awning Operator 11.42

Numbers usually found on this operator are 31545

arms measure 12" across when in the closed postition

Truth part # 11.42.00.001

Truth Entrygard 11.43 Awning Operator 31545

Arms are 8-3/8" long, and measures 20-3/4" across when the arms are in the closed position.

Awing Operator, we usually find 31545 stamped on the arm, they used to be a cadmium plated steel, now they are powder coated. We also find 21221 on it.

Truth 22.17 Awning Operator 13-1/4"

Surface mounted Truth Awning Window Operator.  The arms span 13-1/4” from rivet to rivet.  The mounting holes measure 6-7/8” on the outside screws center to center, and 6” center to center on the two inside mounting screws.

Truth Part # 22.17

Truth 10.11 Lever Window Operator Double Pull More Than 2"

Handle assembly projects more than 2"

Truth 10.11 Lever Operator Double Pull Less Than 2"

Handle assembly projects less than 2"

Truth 10.10 Lever Operator Single Pull Less Than 2"

Less than 2" projection.

Attaches to window at one point.

Includes sash hook.

Truth 10.10 Lever Operator Single Pull More than 2"

More than 2" projection.

Attaches to window at one point.

Includes sash hook.

The Truth 23.49 is a Dyad Operator is rear mounted. The linkage arm is 9-1/4 inches overall length, 8-3/4 inches hole to hole. The rear mounting holes are 5 inches on centers.

The Truth Encore Handle and Cover are used on the Encore Operators Wi5110 and Wi5010.  The flush design is ideal when you have curtains and blinds on your window.  The cover are constructed on Plastic and the Handles are die cast metal.  Use the drop down menu to figure out hand, the color is not correct by the handing is, select color and then hand.

Color Chart

Truth Part Numbers 12614 (Left Hand) and 12616 (Right Hand).

The Truth-Wright Split Arm Operator is a replacement for the older Wright Operators.  Linkage arm has an overall length of 3-5/8".

Left Hand Shown in Picture, we can only get these in white.

Truth 11" Surface Rear Mounted Operator

This Truth Surface Mounted Window Operator is usually used on commercial aluminum windows. It features an 11" long arm, measured from the center of the housing to the center of the metal roller.

The Truth 50.60 Encore Dyad Operator has been in production since about 1999.   In the beginning Truth offered the Maxim and the Encore Systems.   The Maxim is being phased out and the Encore is the only one made now.   The Encore will replace all of the Maxim operators, and have the same hole spacings and operation, but they have the interchangeable handle and covers.

The Operator in the Picture is a Left Hand.

Window Operator Handing

Truth Encore Dual Arm Operator for Low Profile windows.  Same as the Wi5010, but has a rectangular slide on the long arm instead of the standard models square slide.

Truth Encore Single Arm Operator.