Truth

Truth 22.29 Awning Operator

The Truth 22.29 is the rear mount awning operator, meaning the screws to mount it come in from the outside of the window frame. This usually means it is used on aluminum or vinyl clad windows. The arms measure 16-1/2" across in the closed position, or 16" elbow joint to elbow joint. The mounting screws are 7" on center. Common numbers found on the arms are 31254, 31255, and 30896. We only offer this operator in white.

Truth Part # 22.29.32.002

Truth 22.17 Awning Operator 13-1/4"

Surface mounted Truth Awning Window Operator.  The arms span 13-1/4” from rivet to rivet.  The mounting holes measure 6-7/8” on the outside screws center to center, and 6” center to center on the two inside mounting screws.

Truth Part # 22.17

Truth 10.11 Lever Window Operator Double Pull More Than 2"

Handle assembly projects more than 2"

Truth 10.11 Lever Operator Double Pull Less Than 2"

Handle assembly projects less than 2"

Truth 10.10 Lever Operator Single Pull Less Than 2"

Less than 2" projection.

Attaches to window at one point.

Includes sash hook.

Truth 10.10 Lever Operator Single Pull More than 2"

More than 2" projection.

Attaches to window at one point.

Includes sash hook.

Truth Awning Window Hinge 13.13

10" Track Length

common number found stamped on this hinge are 30122A, 30121 and 31701

This hinge is sold in pairs, you get a left and right

Truth 14.17 Casement Hinge-Pair

The 14.17 is not that popular of a hinge. But if your track measures 14" than this is probably what you have. The hinge has a stack height of 7/16". The outside screw holes measure 12-3/8" on center. We sometimes find the number 30986 on the arm and 41498 and 41499 on the stainless steel track.

This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.

Truth 17.32 Sweep Latch

This Truth Trimline Cam Lock features a 2-1/16" hole spacing, and the distance from the center of the screw hole and the lock face is 3/8". This sweep lock is also known as a Window Cam Lock, or Double Hung Window Lock.

Color Chart

The Truth Window Handle 24.25 is one of the more popular window handles.  On the older version the handle was plastic toward the end of the handle, and it would break off.  The new version is metal all the way to the end.  It has 2-1/2" on center mounting screws, and the mounting plate is 2-7/8" long x 5/8" wide.  This Truth Casement Window Handle sometimes has the number 45200 or 45268 cast into it. And U.S. Patent Number 4.674.777.  See the exact measurements in the "More Views" window.

Color Chart

Angle Base 1-3/8" Window Handle Truth

Also known as the Truth 25.39, this handle is constructed of a die cast metal and powder coated to the desired color. The distance between the screws is 1-3/8" on center. The handle measures 3-3/4" long, base measures 2-1/8" long. The number found on the handle is 45086 for the Right Hand, and 45085 for the Left Hand. We also find U.S. Pat. # 4,930,820

Right Hand is shown in picture.

Truth 20236 Inline Strike Housing

The Truth 20236 Strike Housing is used with the 20231, 20232 and 20233 Strike Inserts.   By selecting the proper Strike Insert you can control the height of the lock up.  The 20236 is an In Line Strike, meaning the mounting holes of the strike line up with the center line of the strike.  The mounting holes are 1-1/2" on center, and the housing measures 5/8" wide by 2-1/16" long.

Truth Part # 20236.xx  where xx is the finish

Color Chart

Truth Offset Strike Housing 20237 are now only available in Black

The Truth 20237 Strike Housing is used with the 20231, 20232 and 20233 Strike Inserts.   By selecting the proper Strike Insert you can control the height of the lock up.  The 20237 is an Off Set Strike, meaning the mounting holes of the strike are off set to the center line of the strike.  The holes are 1-1/2" on center, and the housing measures 5/8" wide by 2-1/16".

Truth Part # 20237.xx  

Truth Entrygard 10796 Right Hand Bracket

This bracket is usually used on the Entrygard Dual Arm Operators. This bracket is what the linkage arm attaches to on the hinge side of the with.

Truth Entrygard 10795 Left Hand Bracket

This bracket is usually used on the Entrygard Dual Arm Operators. This bracket is what the linkage arm attaches to on the hinge side of the with.

The Truth 23.49 is a Dyad Operator is rear mounted. The linkage arm is 9-1/4 inches overall length, 8-3/4 inches hole to hole. The rear mounting holes are 5 inches on centers.

The Truth Encore Handle and Cover are used on the Encore Operators Wi5110 and Wi5010.  The flush design is ideal when you have curtains and blinds on your window.  The cover are constructed on Plastic and the Handles are die cast metal.  Use the drop down menu to figure out hand, the color is not correct by the handing is, select color and then hand.

Color Chart

Truth Part Numbers 12614 (Left Hand) and 12616 (Right Hand).

The Truth-Wright Split Arm Operator is a replacement for the older Wright Operators.  Linkage arm has an overall length of 3-5/8".

Left Hand Shown in Picture, we can only get these in white.

The Truth Entrygard 10584 Right Hand Bracket measures 2-3/4" x 1-3/8" x 1/2".  The mounting holes are 1-5/8" on center.

The Truth Entrygard 10583 Left Hand Bracket measures 2-3/4" x 1-3/8" x 1/2".  The mounting holes are 1-5/8" on center.

Truth 11" Surface Rear Mounted Operator

This Truth Surface Mounted Window Operator is usually used on commercial aluminum windows. It features an 11" long arm, measured from the center of the housing to the center of the metal roller.

The Truth 50.60 Encore Dyad Operator has been in production since about 1999.   In the beginning Truth offered the Maxim and the Encore Systems.   The Maxim is being phased out and the Encore is the only one made now.   The Encore will replace all of the Maxim operators, and have the same hole spacings and operation, but they have the interchangeable handle and covers.

The Operator in the Picture is a Left Hand.

Window Operator Handing

The Truth 22.18 Front Mount Awning Operator spreads 20-1/8 inches pin to pin on the arms when it is in the closed position. The Front Mount hole spaceing is 7 inches on the outside holes and 6 1/8 inches on the inside holes.

The Truth Maxim 32384 Track is used on for the 50.00, 50.10 and 52.01 operators. The track is unique so the square slide 31877 fits in there perfectly.  The track measures roughly 14-7/16" long with 4 mounting holes

The Truth 11577 is used on the Encore and Maxim Awning Operators, Models Wi5100 (51.00) and Wi5110 (51.10). The operator is attached to the track by the 11647 Slide Shoe. The track measures 16 inches long by 5/8 inches wide and 5/16 inches deep.

Truth Encore Dual Arm Operator for Low Profile windows.  Same as the Wi5010, but has a rectangular slide on the long arm instead of the standard models square slide.

Truth Encore Single Arm Operator.

Awning Operator Guide Bar 30568

The Truth Operator Guide Bar measures 26-3/4" long with the two mounting holes at 26-1/8" on centers. The bar is constructed of extruded aluminum. The Wi10005 is the component that slides in this track. This track is mounted to the sash.

Truth Part # 30568