Truth | Aluminum

Truth 23.00 Window Operator 9-1/2"  rear mounting

9-1/2" arm, rear mounting, Ships with matching handle.

Left Hand Shown in picture

Color Chart

Handing Diagram

Truth 23.01 Single Arm Front Mounting

9-1/2" arm

Left Hand Shown in picture

Color Chart

Handing Diagram

Truth 23.02 Window Operator 13-1/2"

13-1/2" long arm. Rear Mounting. Ships with matching handle.

Left Hand Shown in picture

Color Chart

Handing Diagram

The Truth Casement Handle Aluminum-2-3/8" is used on many aluminum windows manufactured from the 1970's.  This handle is the same as the Wi2423, but the lock up dimension is 3/8".  The lock up dimension is the distance from the back of the handle mounting plate to the inside surface of the hook when it is closed.  The handle features die cast construction, and is then powder coated to the desired finish.  Aluminum and white in stock, call for other colors.

The Project In Truth Handle-1-1/2" -7/16" Lock Up is a handle we have seen since the 1970's.  This window handle features a 1-1/2" hole spacing on centers with a 7/16" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice.  It is used on Project In or Thru Rail Hopper style windows. We stock the Bronze color, but other colors are available, call for more information.

Right hand handle is shown in the picture.

The Truth Hole Two Cam Handle 1-1/2" W Ring Pull Offset is considered an off set handle, because the mounting holes are off set  with the axis of rotation of the cam handle.  This is a very popular handle that has only been around since the 1970's.  It is die cast metal that is then powder coat painted.

Right Hand Shown in picture.

Truth part # 25.70.03.xxx

The Truth Hole Two Cam Handle 1-1/2" Offset has die cast construction with a powder coated painted finish. We find the numbers 45086 on the right hand handles, and 45085 on the left hand handles. Right Hand Shown on Website!

Color Chart

The Truth Two Hole Cam Handle 1-1/2" Inline has a die cast construction with a powder coated paint finish.  It features an 1-1/2" hole spacing.  We find the numbers 45086 on the right hand handles, and 45085 on the left hand handles.  This handle is very popular on aluminum framed commercial windows due to its low cost.

The handle shown in the picture is a Right Hand.

Color Chart

Truth 11" Surface Mounted Operator

This Truth Surface Mounted Window Operator is usually used on commercial aluminum windows. It features an 11" long arm, measured from the center of the housing to the center of the metal roller. The outside mounting screw holes are 4-3/4" a part and the inter screws are 3-7/8" on center.

Right Hand Shown, in Aluminum

Right Hand Aluminum Wi36223AL
Left Hand Aluminum Wi36222AL
Right Hand Bronze Wi36223BR
Left Hand Bronze Wi36222BR
Right Hand White Wi36223W
Left Hand White Wi36222W

The Truth Casement Handle 24.23 is used on many aluminum, vinyl and wood windows manufactured from the 1970's.  This handle is the same as the C1729, but the lock up dimension is 1/2".  The lock up dimension is the distance from the back of the handle mounting plate to the inside surface of the hook when it is closed.  The center to center dimension on the mounting plate is 2-3/8".  The handle features die cast construction, and is then powder coated to the desired finish. White is in stock, call for other colors.

Truth Part # 24.23.xx.200 , were the xx is the finish code.

Truth 10579 Window Operator Handle

We some times find the number 45054 cast in the back side of this handle.  This handle fits all Truth Operators with a 11/32" spline, which is all of them made after 1975.

Truth part # 10579.xx where xx is the color code

Color Chart

The Truth 11329 Folding Crank Handle is constructed of die cast metal and plastic.  The handle is metal, but the part the mounts on the window spline or shaft is plastic.  The handle tilts down to clear blinds and is held in place by a small flat head screw.  The only issue we see with this handle is the plastic piece that mounts on the shaft of the operator, this some times strips out, but usually only in rental properties.  This handle will work on all Truth Crank Operators, and has an 11/32" spline.

Color Chart

Truth 22.10 Awning Operator 24-7/8"

Surface mounted Truth Awning Window Operator. The arms span 24-7/8" when in the closed postion. The mounting screws are 7" on center on the outside screw holes and 6" on center on the inside holes. Plastic Glides are not available separately, they are riveted in place. The only number we have found on this operator is a UK Pat # 2135397

Truth Part # 22.10

Angle Base 1-3/8" Window Handle Truth

Also known as the Truth 25.39, this handle is constructed of a die cast metal and powder coated to the desired color. The distance between the screws is 1-3/8" on center. The handle measures 3-3/4" long, base measures 2-1/8" long. The number found on the handle is 45086 for the Right Hand, and 45085 for the Left Hand. We also find U.S. Pat. # 4,930,820

Right Hand is shown in picture.