Search results for: '30842 lever operator for jeld white cast window'
- Related search terms
- white articulating 40577w good 301
- window tentry good 30895 301
- window truth goods 31879 301
- window+truth+entry+good+30895a 301
- window+truth+entry+good+30645 301
- window+truth+30851entry+goods+30645 301
- window+truth+good+30591 301
- window+tentry+good+30842 301
- window+truth+30851entry+good+31879 301
- window tentry goods 31876 301
-
Two Hole 1-1/2" Wedgeless Cam Handle
Two Hole 1-1/2" Wedgeless Cam Handle
Hinged flap rolls down and locks the window shut. We find this window handle is used alot in the western states. The older version had a 1-3/8" hole spacing, but the new one has 1-1/2" hole spacing.
Sometimes we find the number R and 1 on the flap and DISCO cast in on the back of the handle.
White only!
Wi32552- -
Truth 50.60 Encore Dyad Operator
The Truth 50.60 Encore Dyad Operator has been in production since about 1999. In the beginning Truth offered the Maxim and the Encore Systems. The Maxim is being phased out and the Encore is the only one made now. The Encore will replace all of the Maxim operators, and have the same hole spacings and operation, but they have the interchangeable handle and covers.
The Operator in the Picture is a Left Hand.
Window Operator Handing
Wi5060 -
Window Handle Angle Base 1-3/8" Truth
Angle Base 1-3/8" Window Handle Truth
Also known as the Truth 25.39, this handle is constructed of a die cast metal and powder coated to the desired color. The distance between the screws is 1-3/8" on center. The handle measures 3-3/4" long, base measures 2-1/8" long. The number found on the handle is 45086 for the Right Hand, and 45085 for the Left Hand. We also find U.S. Pat. # 4,930,820
Right Hand is shown in picture.
T266- -
Two Hole Cam Handle 1-1/2" 9/32" Lock Up
The Two Hole Cam Handle 1-1/2" 9/32" Lock Up is is constructed cast white bronze with a brushed nickel finish. This handle is the same as the T1015, but with an 1-1/2" hole spacing. The 9/32" is the distance from the mounting plate bottom to the bottom of the handle. We find this handle on awning and hopper style windows.
Right Hand Shown in Picture
T1025 -
Truth 16.52 Window Lock
Truth 16.52 Sash Lock. A very common sash lock that tends to fail because the plastic slide breaks due to incorrect installation at the window manufacturer or being forced when there is a obstruction in the window opening. The new replacement model has a thicker plastic slide. Because the slide is thicker, the keeper, part # Wi41268 and Wi41269 might have to be shimmed with small washers. The lock measures 2-5/16" between screws, 2-3/4" high by 2-3/16" deep and 1" thick. Truth did make a Sash Lock that was similar to this one, but was 3-1/2" tall, that model has been discontinued.
Common numbers found on this sash lock are 21328 and 45189
Non handed (can be used on right or left hand windows).
Color Chart
WI1652 -
Project In Handles-1-1/2"
Project In Window Handles-1-1/2"
This window handle has a hole spacing of 1-1/2" with a 7/16" lock up. It is also known as a Off-Set Project In Window Handle because the point of rotation does not line up with the screws holes, it is off-set. Cast white bronze with a brushed nickel finish
P5036 -
Casement Roto Operator
Casement Roto Operator
This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes. The housing is contructed of die case metal that is electro-statically painted. The housing is 5-1/2" wide. The optional handle fits the 5/16" Hex Shaft.
Left Hand Shown in picture
Wi21062- -
Two Hole Wedgeless Cam Handle 1-1/4"
The Two Hole Wedgeless Cam Handle 1-1/4" is constructed of die cast metal and the flap is plastic. Hinged flap rolls down and locks the window shut. We find this window handle is used a lot in the western states on residential windows. The older version had a 1-3/8" hole spacing, but the new one has 1-1/4" hole spacing.
Sometimes we find the number R1 and CAN on this handle
White only!
WI32455 -
Project In Truth Handle-1-1/2" -7/16" Lock Up
The Project In Truth Handle-1-1/2" -7/16" Lock Up is a handle we have seen since the 1970's. This window handle features a 1-1/2" hole spacing on centers with a 7/16" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. It is used on Project In or Thru Rail Hopper style windows. We stock the Bronze color, but other colors are available, call for more information.
Right hand handle is shown in the picture.
P2731 -
Two Hole Cam Handle 1-1/2" Plastic Window Handle
The Two Hole Cam Handle 1-1/2" Plastic Window Handle is constructed of high density plastic. The mounting hole spacing is an 1-1/2". The lock up dimension is 3/8". The base measures 2-1/8" x 7/8". The handle measures 3-1/2" long. We seem to only find this handle on basement egress window in residential environments.
The white is in stock, the beige has a 1-3 week lead time.
Wi32403- -
Truth Window Lock 16.16
Truth 16.16 Sash Lock.
3" x 2-9/16" x 1", with 2-3/8" hole spacing
This sash lock has been discontinued. If you order this part, the 16.27 will be sent as a replacement. According to the factory, the Wi1627 will work as a replacement with any modification.
Used truth keeper # Wi20034
WI1616 -
Sweep Latch for Aluminum Windows
Sweep Lock for Aluminum Windows
Made die cast metal, unfinished. Lock measures 1-5/8" x 15/16" x 3/8" projection. Available in left and right versions, the Right Hand version is shown in the picture. This lock is found on aluminum framed windows. Ships with Latch and Nylon Bushing, the screw is not included.
SL4428-