Search results for: '30842+lever+operator+for+jeld+week+cast+window'
- Did you mean
- 30842 lever operator for jeld when cast window 0
-
Truth Two Hole Cam Handle 1-1/2" Inline
The Truth Two Hole Cam Handle 1-1/2" Inline has a die cast construction with a powder coated paint finish. It features an 1-1/2" hole spacing. We find the numbers 45086 on the right hand handles, and 45085 on the left hand handles. This handle is very popular on aluminum framed commercial windows due to its low cost.
The handle shown in the picture is a Right Hand.
Color Chart
T268 -
Truth Hole Two Cam Handle 1-1/2" W Ring Pull Offset
The Truth Hole Two Cam Handle 1-1/2" W Ring Pull Offset is considered an off set handle, because the mounting holes are off set with the axis of rotation of the cam handle. This is a very popular handle that has only been around since the 1970's. It is die cast metal that is then powder coat painted.
Right Hand Shown in picture.
Truth part # 25.70.03.xxx
T265 -
Fenestra Single Hole Cam Handle
The Fenestra Single Hole Cam Handle is only available in the brushed bronze finish, the window handle is constructed of cast red bronze. This handle was very popular in the 1920's up to the 1960's on their steel framed casement windows. The right hand version is shown in the picture.
S208- -
Project In Handle 1-3/8"
The Project In Handle 1-3/8" is one of our most popular window handles. We find it used on commercial hopper style windows. This handle is sometimes called a Project In or Thru Rail window handle. This window handle has a hole spacing of 1-3/8" with a 7/16" lock up, C dimension in diagram below. The handle is constructed of cast white bronze with a brushed nickel finish.
P4907 -
Channel Balances 60 Series
60 Series Channel Balances
The most common type of channel balance. Your existing channel usually has a number stamped on it, usually a 4 digit number. This number tells us the lenth of the channel, and the gauge of the spring. After you have that, you will need to look through the pdf below and pick the plastic ends that are the closest to yours. If we have the number stamped on the channel, and the ends that are attached, we can get them ordered with the ends attached, usually for about $12.00 ea.
WI60XXXX -
Two Hole 1-1/2" Wedgeless Cam Handle
Two Hole 1-1/2" Wedgeless Cam Handle
Hinged flap rolls down and locks the window shut. We find this window handle is used alot in the western states. The older version had a 1-3/8" hole spacing, but the new one has 1-1/2" hole spacing.
Sometimes we find the number R and 1 on the flap and DISCO cast in on the back of the handle.
White only!
Wi32552- -
Two Hole Cam Handle 1-1/2" 9/32" Lock Up
The Two Hole Cam Handle 1-1/2" 9/32" Lock Up is is constructed cast white bronze with a brushed nickel finish. This handle is the same as the T1015, but with an 1-1/2" hole spacing. The 9/32" is the distance from the mounting plate bottom to the bottom of the handle. We find this handle on awning and hopper style windows.
Right Hand Shown in Picture
T1025 -
4 Bar Window Hinge A.W. Anderberg 301SS
A.W. Anderberg 301SS 4 Bar Window Hinge, with stainless steel construction.
Usually found on commercial aluminum framed windows.
If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301SS-XX -
4 Bar Window Hinge A.W. Anderberg 201SS
A.W. Anderberg 201SS 4 bar window hinge, stainless steel construction.
Usually found on light commercial or residential buildings with hopper windows.
23/32" track width x 1/2" stack height.
If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.
Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.
201SS-XX -
Project In Handles-1-1/2"
Project In Window Handles-1-1/2"
This window handle has a hole spacing of 1-1/2" with a 7/16" lock up. It is also known as a Off-Set Project In Window Handle because the point of rotation does not line up with the screws holes, it is off-set. Cast white bronze with a brushed nickel finish
P5036 -
Two Hole Wedgeless Cam Handle 1-1/4"
The Two Hole Wedgeless Cam Handle 1-1/4" is constructed of die cast metal and the flap is plastic. Hinged flap rolls down and locks the window shut. We find this window handle is used a lot in the western states on residential windows. The older version had a 1-3/8" hole spacing, but the new one has 1-1/4" hole spacing.
Sometimes we find the number R1 and CAN on this handle
White only!
WI32455