Search results for: 'window tentry goods 30841'
- Did you mean
- window tentry gold 30841 0
- Related search terms
- window tentry good 30895 301
- window truth goods 30591 301
- window+truth+entry+good+30645 301
- window+truth+30851entry+goods+30645 301
- window+truth+good+30591 301
- window+tentry+good+30842 301
- window+truth+30851entry+good+31879 301
- window truth 30851entry good 31539 300
- window tentry goods 30897 300
- window tentry goods 31877 300
-
4 Bar Window Hinge A. W. Anderberg 301ST
A.W. Anderberg 301ST Cadnium Plated Steel HInge
Usually used on commercial hopper windows. If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges. This hinge has been discontinued, and is replaced by the 301SS hinge, which has the same hole spacing, length, and stack height.
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301ST-XX -
Project In Truth Handle-1-1/2"- 1/2" Lock Up
The Project In Truth Handle-1-1/2"- 1/2" Lock Up is a handle we have seen since the 1970's. This window handle features a 1-1/2" hole spacing on centers with a 1/2" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. We find it used on Project In or Thru Rail type Hopper windows. We stock the Bronze color, but other colors are available, call for more information.
Right Hand handle shown in picture.
P2732 -
Project-In Window Handle With Ring Pull 1-1/2"
Project In Handle With Ring Pull 1-1/2"
This is a very popular window handle. The handles has a hole spacing of 1-1/2" with a 7/16" lock up. This is used for a replacement for many manufactures. This handle is constructed of cast white bronze with a brushed nickel finish.
P4908RP -
-
Dual Arm Truth Maxim Operator 50.10
Dual Arm Truth Maxim Operator 50.10
The Truth 50.10 Maxim Dual Arm is one of the more popular new style operators. This operator is the same as the 50.00, but without the painted steel cover riveted to it. Some numbers we find on this operator are 41011 and 31876.
Left Hand Operator shown in picture.
WI5010 -
Ives Window Lock 07
The Ives Window Lock 07 are made of solid brass and plated to your desired finish. We are offering them in Brushed Brass, Satin Nickel, Polished Chrome and Brushed Chrome. The base is 15/16" x 2-9/16", and the Strike is 5/8" x 2-9/16" with both have a center to center screw spacing of 1-15/16".
Ives Part # 07
Wi07- -
Fenestra Window Operator 3-1/4"
The Fenestra Window Operator 3-1/4" is a replica of a version made in the 1920's to 1950's. This version is made of a die cast material, that is then powder coated in an aluminum finish. If you want bronze color, your best bet is to purchase some bronze spray paint and paint them. Ships with mounting screws and handle.
Left hand shown in pictureHanding Diagram
RO727- -
Truth 11329 Folding Crank Handle
The Truth 11329 Folding Crank Handle is constructed of die cast metal and plastic. The handle is metal, but the part the mounts on the window spline or shaft is plastic. The handle tilts down to clear blinds and is held in place by a small flat head screw. The only issue we see with this handle is the plastic piece that mounts on the shaft of the operator, this some times strips out, but usually only in rental properties. This handle will work on all Truth Crank Operators, and has an 11/32" spline.
Color Chart
Wi11329 -
-
Truth 10579 Long Crank Handle
Truth 10579 Window Operator Handle
We some times find the number 45054 cast in the back side of this handle. This handle fits all Truth Operators with a 11/32" spline, which is all of them made after 1975.
Truth part # 10579.xx were xx is the color code
Color Chart
WI10579 -
Truth Hole Two Cam Handle 1-1/2" W Ring Pull Offset
The Truth Hole Two Cam Handle 1-1/2" W Ring Pull Offset is considered an off set handle, because the mounting holes are off set with the axis of rotation of the cam handle. This is a very popular handle that has only been around since the 1970's. It is die cast metal that is then powder coat painted.
Right Hand Shown in picture.
Truth part # 25.70.03.xxx
T265 -
Two Hole Cam Handle 1-1/2" Plastic Window Handle
The Two Hole Cam Handle 1-1/2" Plastic Window Handle is constructed of high density plastic. The mounting hole spacing is an 1-1/2". The lock up dimension is 3/8". The base measures 2-1/8" x 7/8". The handle measures 3-1/2" long. We seem to only find this handle on basement egress window in residential environments.
The white is in stock, the beige has a 1-3 week lead time.
Wi32403- -
4 Bar Window Hinge 16" Pair
This 16" track length 4 bar hinge is made by Securistyle. The hinge measures 16" long by .906" wide with a .625" stack height
Sold in pairs, one left and one right
Stainless Steel Construction
Sometimes known as the Securi-Style Hinge or Storm Hinge, and replaced the Defender Series
Securistyle part # 851-092-8046
WH116 -
Two Hole Cam Handle 1-3/8" 5/16" Lockup With Ring Pull
Two Hole 1-3/8" Window Handle 5/16" Lockup With Ring Pull
This window handle features a 1-3/8" hole spacing, a 5/16" lock up dimension and a ring pull for elevated windows. This handle is cast white bronze construction with a brushed nickel finish.
Right Hand Shown
T3080 -
Project In Handle 1-3/8"
The Project In Handle 1-3/8" is one of our most popular window handles. We find it used on commercial hopper style windows. This handle is sometimes called a Project In or Thru Rail window handle. This window handle has a hole spacing of 1-3/8" with a 7/16" lock up, C dimension in diagram below. The handle is constructed of cast white bronze with a brushed nickel finish.
P4907