Search results for: '31538 truth entryg'
- Related search terms
- truth entry goods part part number 451210number 45251 301
- truth entry good part pair number 451210number 45189 301
- truth entry goods part upart number 451210number 45251 301
- truth entry goods pair pair number 451210number 45108 301
- truth entry goods pair pair number 451210number 45240 301
- truth entry goods part pair number 451210number 45240 301
- truth entry goods pa 301
- truth entry goods part upart number 451210number 45108 301
- truth entry goods part part number 451210number 45240 301
- entrygard goods 30841 301
-
Truth Awning Operator 22.21
Truth Awning Operator 22.21
The arms stretch 21-1/2" across in the closed position. The housing is front side mounted with 4 screws. The spacing on the outside screws are 7" on center, and 6" on the inter screws.
The Wi11454 handle in matching color is included with the operator along with the Sash Hook Wi20008.
Color Chart
Wi2221- -
Truth Split Arm Operator 15.26
Truth Split Arm Operator 15.26
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.
Left hand shown. White and Bronze only
Color Chart
Window Operator Handing
WI1526 -
Truth Casement Hinge 14.75 -Sold In Pairs 30744
The Truth 14.75 hinge is the most common of the Truth Casement Hinges. The stainless steel track is 10" long, the glide is a plastic coated steel. The most common problem on this hinge is the shoe. When the hinge is installed incorrectly or not maintained the shoe could pull out the window track. Common numbers found on this hinge are 30744B, 31133C, 40942 and 40941.
This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
WI1475 -
Truth Hole Two Cam Handle 1-1/2" W Ring Pull Offset
The Truth Hole Two Cam Handle 1-1/2" W Ring Pull Offset is considered an off set handle, because the mounting holes are off set with the axis of rotation of the cam handle. This is a very popular handle that has only been around since the 1970's. It is die cast metal that is then powder coat painted.
Right Hand Shown in picture.
Truth part # 25.70.03.xxx
T265 -
-
Project In Truth Handle-1-1/2" -7/16" Lock Up
The Project In Truth Handle-1-1/2" -7/16" Lock Up is a handle we have seen since the 1970's. This window handle features a 1-1/2" hole spacing on centers with a 7/16" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. It is used on Project In or Thru Rail Hopper style windows. We stock the Bronze color, but other colors are available, call for more information.
Right hand handle is shown in the picture.
P2731 -
Truth Operator 9-1/2"
Truth Operator 9-1/2". This new style replaces the older traditional size shown in the diagrams.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
We sometimes find the number 45251 cast on the housing, and 40049 and 40050 stamped on the arms. This operator has a Nylon Roller or Wheel.
Left hand shown. The Wi11454 handle in matching color is included
p>Window Operator Handing
Color Chart
WI1531 -
Truth 22.17 Awning Operator 13-1/4"
Truth 22.17 Awning Operator 13-1/4"
Surface mounted Truth Awning Window Operator. The arms span 13-1/4” from rivet to rivet. The mounting holes measure 6-7/8” on the outside screws center to center, and 6” center to center on the two inside mounting screws.
Truth Part # 22.17
Wi2217- -
Truth Casement Limit Device 99.20
The Truth Casement Limit Device 99.20 is designed to stop the window from opening too far, and prevent people from falling out of an elevated window. The device is constructed of stainless steel and steel. The Track measures 4-5/8" long, while the arm measures 6" overall length. In many jurisdictions this product or similar products are required by law.
WI9920LMT -
Truth 50.60 Encore Dyad Operator
The Truth 50.60 Encore Dyad Operator has been in production since about 1999. In the beginning Truth offered the Maxim and the Encore Systems. The Maxim is being phased out and the Encore is the only one made now. The Encore will replace all of the Maxim operators, and have the same hole spacings and operation, but they have the interchangeable handle and covers.
The Operator in the Picture is a Left Hand.
Window Operator Handing
Wi5060 -
Truth 41157 Plastic Tie Bar Guide
Truth 41157 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi41157 -
Truth 45141 Plastic Tie Bar Guide
Truth 45141 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi45141 -
Truth Two Hole Cam Handle 1-1/2" W/Ring Pull
The Truth Two Hole Cam Handle 1-1/2" W/Ring Pull is considered an In Line handle, because the mounting holes line up with the axis of rotation of the cam handle. This is a very popular handle that has only been around since the 1970's. It is die cast metal that is then powder coat painted.
Left Hand Shown in picture.
T264 -
Truth Entrygard 11.43 Awning Operator 31545
Truth Entrygard 11.43 Awning Operator 31545
Arms are 8-3/8" long, and measures 20-3/4" across when the arms are in the closed position.
Awing Operator, we usually find 31545 stamped on the arm, they used to be a cadmium plated steel, now they are powder coated. We also find 21221 on it.
WI1143 -
Truth Entrygard Awning Operator 11.44 21221
Truth Entrygard Awning Operator 11.44 21221
Arms are 13-3/8" long, and the span of the arms when in the closed position, arms opposing each other, is 28-1/8" (Hole to Hole)
Awing Operator, we usually find 40759, 40760, and 21221 stamped on the arms, they used to be a cadmium plated steel, now they are powder coated.
WI1144 -
Truth 45145 Plastic Tie Bar Guide
Truth 45145 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi45145 -
Truth 11" Surface Mounted Operator
Truth 11" Surface Mounted Operator
This Truth Surface Mounted Window Operator is usually used on commercial aluminum windows. It features an 11" long arm, measured from the center of the housing to the center of the metal roller. The outside mounting screw holes are 4-3/4" a part and the inter screws are 3-7/8" on center.
Right Hand Shown, in Aluminum
Right Hand Aluminum Wi36223AL
Left Hand Aluminum Wi36222AL
Right Hand Bronze Wi36223BR
Left Hand Bronze Wi36222BR
Right Hand White Wi36223W
Left Hand White Wi36222WWi3622X