Search results for: '30842+lever+operator+for+jeld+week+clay+window'
- Did you mean
- 30842 lever operator for jeld when clay window 0
-
Casement Roto Operator
Casement Roto Operator
This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes. The housing is contructed of die case metal that is electro-statically painted. The housing is 5-1/2" wide. The optional handle fits the 5/16" Hex Shaft.
Left Hand Shown in picture
Wi21062- -
Project In Truth Handle-1-1/2"- 1/2" Lock Up
The Project In Truth Handle-1-1/2"- 1/2" Lock Up is a handle we have seen since the 1970's. This window handle features a 1-1/2" hole spacing on centers with a 1/2" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. We find it used on Project In or Thru Rail type Hopper windows. We stock the Bronze color, but other colors are available, call for more information.
Right Hand handle shown in picture.
P2732 -
Truth Casement Handle Aluminum-2-3/8"
The Truth Casement Handle Aluminum-2-3/8" is used on many aluminum windows manufactured from the 1970's. This handle is the same as the Wi2423, but the lock up dimension is 3/8". The lock up dimension is the distance from the back of the handle mounting plate to the inside surface of the hook when it is closed. The handle features die cast construction, and is then powder coated to the desired finish. Aluminum and white in stock, call for other colors.
C1729-- -
Truth Casement Handle 24.23
The Truth Casement Handle 24.23 is used on many aluminum, vinyl and wood windows manufactured from the 1970's. This handle is the same as the C1729, but the lock up dimension is 1/2". The lock up dimension is the distance from the back of the handle mounting plate to the inside surface of the hook when it is closed. The center to center dimension on the mounting plate is 2-3/8". The handle features die cast construction, and is then powder coated to the desired finish. White is in stock, call for other colors.
Truth Part # 24.23.xx.200 , were the xx is the finish code.
WI2423- -
Channel Balances 60 Series
60 Series Channel Balances
The most common type of channel balance. Your existing channel usually has a number stamped on it, usually a 4 digit number. This number tells us the lenth of the channel, and the gauge of the spring. After you have that, you will need to look through the pdf below and pick the plastic ends that are the closest to yours. If we have the number stamped on the channel, and the ends that are attached, we can get them ordered with the ends attached, usually for about $12.00 ea.
WI60XXXX -
4 Bar Window Hinge A.W. Anderberg 301SS
A.W. Anderberg 301SS 4 Bar Window Hinge, with stainless steel construction.
Usually found on commercial aluminum framed windows.
If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301SS-XX -
4 Bar Window Hinge A.W. Anderberg 201SS
A.W. Anderberg 201SS 4 bar window hinge, stainless steel construction.
Usually found on light commercial or residential buildings with hopper windows.
23/32" track width x 1/2" stack height.
If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.
Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.
201SS-XX -
Fenestra Window Handle-2-5/8"
The Fenestra Casement Handle is very common on Fenestra Windows made in the 1950's. Common markings on this handle are 2845 and Fenestra. The handle has a 2-5/8" center to center dimension on the mounting holes, with a 9/16" lock up. Cast white bronze construction with a brushed nickel finish.
Right hand shown
C2845 -
Truth Offset Strike Housing 20237
Truth Offset Strike Housing 20237 are now only available in Black
The Truth 20237 Strike Housing is used with the 20231, 20232 and 20233 Strike Inserts. By selecting the proper Strike Insert you can control the height of the lock up. The 20237 is an Off Set Strike, meaning the mounting holes of the strike are off set to the center line of the strike. The holes are 1-1/2" on center, and the housing measures 5/8" wide by 2-1/16".
Truth Part # 20237.xx
WI20237- -
Defender 12” Window Hinge | Securistyle Hinges
Securistyle Defender 12” Window Hinge
This hinge is used on aluminum, vinyl and wood windows. They are fitted with a unique plastic raiser block which guarantees a sure fit. This hinge is 12” long, has a 1/2” stack height and measures 11/16” wide and is constructed of Stainless Steel. We sometimes see Securistyle or made in the UK stamped on the hinge.
Sold in Pairs
WH112