Search results for: '30841+lever+operator+for+jeld+when+chart+window'
- Did you mean
- 30841 lever operator for jeld when chang window 0
- 30841 lever operator for jeld when cast window 0
-
Truth 41157 Plastic Tie Bar Guide
Truth 41157 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi41157 -
Truth 45141 Plastic Tie Bar Guide
Truth 45141 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi45141 -
Truth 50.60 Encore Dyad Operator
The Truth 50.60 Encore Dyad Operator has been in production since about 1999. In the beginning Truth offered the Maxim and the Encore Systems. The Maxim is being phased out and the Encore is the only one made now. The Encore will replace all of the Maxim operators, and have the same hole spacings and operation, but they have the interchangeable handle and covers.
The Operator in the Picture is a Left Hand.
Window Operator Handing
Wi5060 -
Two Hole Cam Handle 1-3/8" 5/16" Lockup With Ring Pull
Two Hole 1-3/8" Window Handle 5/16" Lockup With Ring Pull
This window handle features a 1-3/8" hole spacing, a 5/16" lock up dimension and a ring pull for elevated windows. This handle is cast white bronze construction with a brushed nickel finish.
Right Hand Shown
T3080 -
Truth Window Handle 24.25
The Truth Window Handle 24.25 is one of the more popular window handles. On the older version the handle was plastic toward the end of the handle, and it would break off. The new version is metal all the way to the end. It has 2-1/2" on center mounting screws, and the mounting plate is 2-7/8" long x 5/8" wide. This Truth Casement Window Handle sometimes has the number 45200 or 45268 cast into it. And U.S. Patent Number 4.674.777. See the exact measurements in the "More Views" window.
Color Chart
Wi2425. -
Casement Roto Operator
Casement Roto Operator
This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes. The housing is contructed of die case metal that is electro-statically painted. The housing is 5-1/2" wide. The optional handle fits the 5/16" Hex Shaft.
Left Hand Shown in picture
Wi21062- -
Project In Truth Handle-1-1/2"- 1/2" Lock Up
The Project In Truth Handle-1-1/2"- 1/2" Lock Up is a handle we have seen since the 1970's. This window handle features a 1-1/2" hole spacing on centers with a 1/2" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. We find it used on Project In or Thru Rail type Hopper windows. We stock the Bronze color, but other colors are available, call for more information.
Right Hand handle shown in picture.
P2732 -
Truth Casement Hinge 14.75 -Sold In Pairs 30744
The Truth 14.75 hinge is the most common of the Truth Casement Hinges. The stainless steel track is 10" long, the glide is a plastic coated steel. The most common problem on this hinge is the shoe. When the hinge is installed incorrectly or not maintained the shoe could pull out the window track. Common numbers found on this hinge are 30744B, 31133C, 40942 and 40941.
This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
WI1475 -
Truth Two Hole Cam Handle 1-1/2" Inline
The Truth Two Hole Cam Handle 1-1/2" Inline has a die cast construction with a powder coated paint finish. It features an 1-1/2" hole spacing. We find the numbers 45086 on the right hand handles, and 45085 on the left hand handles. This handle is very popular on aluminum framed commercial windows due to its low cost.
The handle shown in the picture is a Right Hand.
Color Chart
T268 -
Channel Balances 60 Series
60 Series Channel Balances
The most common type of channel balance. Your existing channel usually has a number stamped on it, usually a 4 digit number. This number tells us the lenth of the channel, and the gauge of the spring. After you have that, you will need to look through the pdf below and pick the plastic ends that are the closest to yours. If we have the number stamped on the channel, and the ends that are attached, we can get them ordered with the ends attached, usually for about $12.00 ea.
WI60XXXX