Search results for: '30841+lever+operator+for+jeld+when+chang+window'
- Did you mean
- 30841 lever operator for jeld when crank window 0
-
Truth 41157 Plastic Tie Bar Guide
Truth 41157 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi41157 -
Truth 45141 Plastic Tie Bar Guide
Truth 45141 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi45141 -
Truth 50.60 Encore Dyad Operator
The Truth 50.60 Encore Dyad Operator has been in production since about 1999. In the beginning Truth offered the Maxim and the Encore Systems. The Maxim is being phased out and the Encore is the only one made now. The Encore will replace all of the Maxim operators, and have the same hole spacings and operation, but they have the interchangeable handle and covers.
The Operator in the Picture is a Left Hand.
Window Operator Handing
Wi5060 -
Two Hole Cam Handle 1-3/8" 5/16" Lockup With Ring Pull
Two Hole 1-3/8" Window Handle 5/16" Lockup With Ring Pull
This window handle features a 1-3/8" hole spacing, a 5/16" lock up dimension and a ring pull for elevated windows. This handle is cast white bronze construction with a brushed nickel finish.
Right Hand Shown
T3080 -
Casement Roto Operator
Casement Roto Operator
This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes. The housing is contructed of die case metal that is electro-statically painted. The housing is 5-1/2" wide. The optional handle fits the 5/16" Hex Shaft.
Left Hand Shown in picture
Wi21062- -
Project In Truth Handle-1-1/2"- 1/2" Lock Up
The Project In Truth Handle-1-1/2"- 1/2" Lock Up is a handle we have seen since the 1970's. This window handle features a 1-1/2" hole spacing on centers with a 1/2" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. We find it used on Project In or Thru Rail type Hopper windows. We stock the Bronze color, but other colors are available, call for more information.
Right Hand handle shown in picture.
P2732 -
Truth Contour Window Crank 11454
Truth Contour Window Crank 11454
Truth 11454 Contour Handle. Will work with all Truth Operators manufactured after 1978. Features a snap on clip, so no tools are needed. We sometime find the number 45240 cast into the back of the handle.
11/32" spline
Tuth Part # 11454.xx were xx is the color
Color Chart
Wi11454 -
Truth Casement Hinge 14.75 -Sold In Pairs 30744
The Truth 14.75 hinge is the most common of the Truth Casement Hinges. The stainless steel track is 10" long, the glide is a plastic coated steel. The most common problem on this hinge is the shoe. When the hinge is installed incorrectly or not maintained the shoe could pull out the window track. Common numbers found on this hinge are 30744B, 31133C, 40942 and 40941.
This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
WI1475 -
Channel Balances 60 Series
60 Series Channel Balances
The most common type of channel balance. Your existing channel usually has a number stamped on it, usually a 4 digit number. This number tells us the lenth of the channel, and the gauge of the spring. After you have that, you will need to look through the pdf below and pick the plastic ends that are the closest to yours. If we have the number stamped on the channel, and the ends that are attached, we can get them ordered with the ends attached, usually for about $12.00 ea.
WI60XXXX -
Truth Window Handle 24.25
The Truth Window Handle 24.25 is one of the more popular window handles. On the older version the handle was plastic toward the end of the handle, and it would break off. The new version is metal all the way to the end. It has 2-1/2" on center mounting screws, and the mounting plate is 2-7/8" long x 5/8" wide. This Truth Casement Window Handle sometimes has the number 45200 or 45268 cast into it. And U.S. Patent Number 4.674.777. See the exact measurements in the "More Views" window.
Color Chart
Wi2425. -
Fenestra Window Handle-2-5/8"
The Fenestra Casement Handle is very common on Fenestra Windows made in the 1950's. Common markings on this handle are 2845 and Fenestra. The handle has a 2-5/8" center to center dimension on the mounting holes, with a 9/16" lock up. Cast white bronze construction with a brushed nickel finish.
Right hand shown
C2845 -
Truth Offset Strike Housing 20237
Truth Offset Strike Housing 20237 are now only available in Black
The Truth 20237 Strike Housing is used with the 20231, 20232 and 20233 Strike Inserts. By selecting the proper Strike Insert you can control the height of the lock up. The 20237 is an Off Set Strike, meaning the mounting holes of the strike are off set to the center line of the strike. The holes are 1-1/2" on center, and the housing measures 5/8" wide by 2-1/16".
Truth Part # 20237.xx
WI20237- -
Defender 12” Window Hinge | Securistyle Hinges
Securistyle Defender 12” Window Hinge
This hinge is used on aluminum, vinyl and wood windows. They are fitted with a unique plastic raiser block which guarantees a sure fit. This hinge is 12” long, has a 1/2” stack height and measures 11/16” wide and is constructed of Stainless Steel. We sometimes see Securistyle or made in the UK stamped on the hinge.
Sold in Pairs
WH112