Search results for: '30841+lever+operator+for+jeld+when+casement+window'
-
Project-In Window Handle With Ring Pull 1-1/2"
Project In Handle With Ring Pull 1-1/2"
This is a very popular window handle. The handles has a hole spacing of 1-1/2" with a 7/16" lock up. This is used for a replacement for many manufactures. This handle is constructed of cast white bronze with a brushed nickel finish.
P4908RP -
Truth Egress Window Hinge 14.77
Truth 14.77 Egress Casement window hinge. This hinge does the same thing as the Wi1475, but the window only travels 2-9/16" into the opening. This hinge is designed to meet Building Egress Code Requirements.
Common numbers found on this hinge are 30463, 30818, 40942 and 40941
Sold in pairs (top and bottom)
Wi1477 -
Truth 12614 and 12616 Encore Handle and Cover
The Truth Encore Handle and Cover are used on the Encore Operators Wi5110 and Wi5010. The flush design is ideal when you have curtains and blinds on your window. The cover are constructed on Plastic and the Handles are die cast metal. Use the drop down menu to figure out hand, the color is not correct by the handing is, select color and then hand.
Color Chart
Truth Part Numbers 12614 (Left Hand) and 12616 (Right Hand).
Wi126XX -
Truth Awning Operator 11.10 30895
Truth Awning Operator 11.10 30895 is the most common of all the Truth Awning Operators. The arms stretch 21-1/2" in the closed position. If you arms stretch 16-1/8" order Wi1112. If your arms stretch 11-3/8" order the Wi1130.
Common numbers sometimes found on this operator are 40510, 40511, 31703 30895, 30895a and 31704. You may see just one or a couple of them on it.
The Wi11454 handle in matching color is included with the operator along with the Sash Hook Wi20008.
Color Chart
WI1110 -
Truth 45145 Plastic Tie Bar Guide
Truth 45145 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi45145 -
Truth Entrygard Operator - Stainless Steel 4-7/16
Truth Entrygard Dual Arm Window Operator. This operator is the same as the Wi1510, except are arms are made of stainless Steel
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Common numbers found on this operator are 30758 RH , 30757 LH, 30514, 30852, 20812, and 30767
Left hand shown.
Window Operator Handing
WI1514 -
Tube Balances 83 Series - 3/8" Diameter Tube
83 Series Tube Balances - 3/8" Diameter
See Attached pdf, for more information.
WI83xxc -
Truth 22.17 Awning Operator 13-1/4"
Truth 22.17 Awning Operator 13-1/4"
Surface mounted Truth Awning Window Operator. The arms span 13-1/4” from rivet to rivet. The mounting holes measure 6-7/8” on the outside screws center to center, and 6” center to center on the two inside mounting screws.
Truth Part # 22.17
Wi2217- -
Truth 41157 Plastic Tie Bar Guide
Truth 41157 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi41157 -
Truth 45141 Plastic Tie Bar Guide
Truth 45141 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi45141 -
Truth 50.60 Encore Dyad Operator
The Truth 50.60 Encore Dyad Operator has been in production since about 1999. In the beginning Truth offered the Maxim and the Encore Systems. The Maxim is being phased out and the Encore is the only one made now. The Encore will replace all of the Maxim operators, and have the same hole spacings and operation, but they have the interchangeable handle and covers.
The Operator in the Picture is a Left Hand.
Window Operator Handing
Wi5060 -
Two Hole Cam Handle 1-3/8" 5/16" Lockup With Ring Pull
Two Hole 1-3/8" Window Handle 5/16" Lockup With Ring Pull
This window handle features a 1-3/8" hole spacing, a 5/16" lock up dimension and a ring pull for elevated windows. This handle is cast white bronze construction with a brushed nickel finish.
Right Hand Shown
T3080 -
Project In Truth Handle-1-1/2"- 1/2" Lock Up
The Project In Truth Handle-1-1/2"- 1/2" Lock Up is a handle we have seen since the 1970's. This window handle features a 1-1/2" hole spacing on centers with a 1/2" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. We find it used on Project In or Thru Rail type Hopper windows. We stock the Bronze color, but other colors are available, call for more information.
Right Hand handle shown in picture.
P2732