Search results for: '30841+lever+operator+for+jeld+week+asement+window'
- Did you mean
- 30841 lever operator for jeld when asement window 0
-
Project-In Window Handle With Ring Pull 1-1/2"
Project In Handle With Ring Pull 1-1/2"
This is a very popular window handle. The handles has a hole spacing of 1-1/2" with a 7/16" lock up. This is used for a replacement for many manufactures. This handle is constructed of cast white bronze with a brushed nickel finish.
P4908RP -
Casement Operator 11" Arm
Casement Window Operator 11" Arm
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
RO269-70 -
Truth Awning Operator 11.10 30895
Truth Awning Operator 11.10 30895 is the most common of all the Truth Awning Operators. The arms stretch 21-1/2" in the closed position. If you arms stretch 16-1/8" order Wi1112. If your arms stretch 11-3/8" order the Wi1130.
Common numbers sometimes found on this operator are 40510, 40511, 31703 30895, 30895a and 31704. You may see just one or a couple of them on it.
The Wi11454 handle in matching color is included with the operator along with the Sash Hook Wi20008.
Color Chart
WI1110 -
Truth Entrygard Operator - Stainless Steel 4-7/16
Truth Entrygard Dual Arm Window Operator. This operator is the same as the Wi1510, except are arms are made of stainless Steel
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Common numbers found on this operator are 30758 RH , 30757 LH, 30514, 30852, 20812, and 30767
Left hand shown.
Window Operator Handing
WI1514 -
Tube Balances 83 Series - 3/8" Diameter Tube
83 Series Tube Balances - 3/8" Diameter
See Attached pdf, for more information.
WI83xxc -
Truth 22.10 Awning Operator 24-7/8"
Truth 22.10 Awning Operator 24-7/8"
Surface mounted Truth Awning Window Operator. The arms span 24-7/8" when in the closed postion. The mounting screws are 7" on center on the outside screw holes and 6" on center on the inside holes. Plastic Glides are not available separately, they are riveted in place. The only number we have found on this operator is a UK Pat # 2135397
Truth Part # 22.10
WI2210 -
Truth 22.17 Awning Operator 13-1/4"
Truth 22.17 Awning Operator 13-1/4"
Surface mounted Truth Awning Window Operator. The arms span 13-1/4” from rivet to rivet. The mounting holes measure 6-7/8” on the outside screws center to center, and 6” center to center on the two inside mounting screws.
Truth Part # 22.17
Wi2217- -
Truth 51.10 Encore Awning Operator
The Truth 51.10 Encore Awning Operator is used on windows that open from the bottom and swing out, like a one piece garage door. When in the closed position, the arms have an approximate length of 15 inches. The housing is constructed of die cast metal, and arms are steel. The complete assembly is electro statically painted. The operator ships with the 31879 detach clip, but does not include the 11647 Maxim Slide Shoe. The slide shoe is the piece that slides in the track at the bottom of the window. A common number we find on this operator is 41013.Wi5110 -
Truth 51.00 Maxim Awning Operator 41013 41016
Truth 51.00 Maxim Awning Operator 41013 41016 Manufactured since 1999 until May 2019. We have a few of them left, but if we do not we will be shipping the Wi5110, and will ship a matching cover and handle with it.
14-1/2" spread when in the closed position. We sometimes find the numbers 31881, 41013 and 41016 stamped on the underside of the 12" long arms. Ships with matching handle.
As of 7-30-2019 we are out of the 5100's, and will be shipping the Wi5110 with Wi21614 Folding Handle and Cover
Color Chart
WI5100 -
Truth 50.60 Encore Dyad Operator
The Truth 50.60 Encore Dyad Operator has been in production since about 1999. In the beginning Truth offered the Maxim and the Encore Systems. The Maxim is being phased out and the Encore is the only one made now. The Encore will replace all of the Maxim operators, and have the same hole spacings and operation, but they have the interchangeable handle and covers.
The Operator in the Picture is a Left Hand.
Window Operator Handing
Wi5060 -
Two Hole Cam Handle 1-3/8" 5/16" Lockup With Ring Pull
Two Hole 1-3/8" Window Handle 5/16" Lockup With Ring Pull
This window handle features a 1-3/8" hole spacing, a 5/16" lock up dimension and a ring pull for elevated windows. This handle is cast white bronze construction with a brushed nickel finish.
Right Hand Shown
T3080 -
Casement Roto Operator
Casement Roto Operator
This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes. The housing is contructed of die case metal that is electro-statically painted. The housing is 5-1/2" wide. The optional handle fits the 5/16" Hex Shaft.
Left Hand Shown in picture
Wi21062- -
Project In Truth Handle-1-1/2"- 1/2" Lock Up
The Project In Truth Handle-1-1/2"- 1/2" Lock Up is a handle we have seen since the 1970's. This window handle features a 1-1/2" hole spacing on centers with a 1/2" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. We find it used on Project In or Thru Rail type Hopper windows. We stock the Bronze color, but other colors are available, call for more information.
Right Hand handle shown in picture.
P2732