Search results for: '30841 lever operator for jeld when casement window'
-
Truth Entrygard 11.43 Awning Operator 31545
Truth Entrygard 11.43 Awning Operator 31545
Arms are 8-3/8" long, and measures 20-3/4" across when the arms are in the closed position.
Awing Operator, we usually find 31545 stamped on the arm, they used to be a cadmium plated steel, now they are powder coated. We also find 21221 on it.
WI1143 -
Truth Entrygard Awning Operator 11.44 21221
Truth Entrygard Awning Operator 11.44 21221
Arms are 13-3/8" long, and the span of the arms when in the closed position, arms opposing each other, is 28-1/8" (Hole to Hole)
Awing Operator, we usually find 40759, 40760, and 21221 stamped on the arms, they used to be a cadmium plated steel, now they are powder coated.
WI1144 -
Truth Casement Hinge 14.75 -Sold In Pairs 30744
The Truth 14.75 hinge is the most common of the Truth Casement Hinges. The stainless steel track is 10" long, the glide is a plastic coated steel. The most common problem on this hinge is the shoe. When the hinge is installed incorrectly or not maintained the shoe could pull out the window track. Common numbers found on this hinge are 30744B, 31133C, 40942 and 40941.
This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
WI1475 -
Truth Window Operator 59.05 Split Arm
Truth Window Operator 59.05 Split Arm
This operator is sometimes a replacement for the Wright Split Arm Operator.
White and Gold only
Common number found on this part is 21550
On the Wright Window Operator we might find a 07900 stamped on the arm.Window Operator Handing
Color Chart
WI5905 -
Truth 22.10 Awning Operator 24-7/8"
Truth 22.10 Awning Operator 24-7/8"
Surface mounted Truth Awning Window Operator. The arms span 24-7/8" when in the closed postion. The mounting screws are 7" on center on the outside screw holes and 6" on center on the inside holes. Plastic Glides are not available separately, they are riveted in place. The only number we have found on this operator is a UK Pat # 2135397
Truth Part # 22.10
WI2210 -
Truth Entrygard Dyad Operator 20810
Truth Entrygard Dyad Operator 20810. The 15.62 is no longer manufactured, we can not get the Right Hand anymore, but have a decent supply of Left Hand's.
Same as the Wi1511, but linkage arm is off set up
Linkage arm stamped 20810A, gear stamped 31367L, base stamped 45108
4-7/16" link dimension, offset up. For offset down, order Wi1511.
Window Operator Handing
Wi1562 -
Truth 51.00 Maxim Awning Operator 41013 41016
Truth 51.00 Maxim Awning Operator 41013 41016 Manufactured since 1999 until May 2019. We have a few of them left, but if we do not we will be shipping the Wi5110, and will ship a matching cover and handle with it.
14-1/2" spread when in the closed position. We sometimes find the numbers 31881, 41013 and 41016 stamped on the underside of the 12" long arms. Ships with matching handle.
As of 7-30-2019 we are out of the 5100's, and will be shipping the Wi5110 with Wi21614 Folding Handle and Cover
Color Chart
WI5100 -
4 Bar Window Hinge A.W. Anderberg 201ST
A.W. Anderberg 201ST 4 bar window hinge, cadmium plated steel construction.
Usually found on light commercial or residential buildings with hopper windows. This hinge is being discontinued, and replaced by the 201SS Hinge, which has the same hole spacing, length, and stack height.
23/32" track width x 1/2" stack height.
If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.
Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.
201ST-XX -
Truth Entrygard Operator Offset Down 20810 Or 20544
Truth Entrygard Dual Arm Operator. We would expect you to find 20810 or 20544 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Call or email for quantity "Discount Codes".
For offset up, order Wi1510.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
PART # HAND
WI1561R RIGHT HAND-Shown Below
WI1561L LEFT HAND-Shown BelowWI1561- -
4 Bar Window Hinge A. W. Anderberg 301ST
A.W. Anderberg 301ST Cadnium Plated Steel HInge
Usually used on commercial hopper windows. If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges. This hinge has been discontinued, and is replaced by the 301SS hinge, which has the same hole spacing, length, and stack height.
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301ST-XX -
Truth 51.10 Encore Awning Operator
The Truth 51.10 Encore Awning Operator is used on windows that open from the bottom and swing out, like a one piece garage door. When in the closed position, the arms have an approximate length of 15 inches. The housing is constructed of die cast metal, and arms are steel. The complete assembly is electro statically painted. The operator ships with the 31879 detach clip, but does not include the 11647 Maxim Slide Shoe. The slide shoe is the piece that slides in the track at the bottom of the window. A common number we find on this operator is 41013.Wi5110 -
4 Bar Window Hinge A.W. Anderberg 201SS
A.W. Anderberg 201SS 4 bar window hinge, stainless steel construction.
Usually found on light commercial or residential buildings with hopper windows.
23/32" track width x 1/2" stack height.
If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.
Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.
201SS-XX -
Truth Casement Limit Device 99.20
The Truth Casement Limit Device 99.20 is designed to stop the window from opening too far, and prevent people from falling out of an elevated window. The device is constructed of stainless steel and steel. The Track measures 4-5/8" long, while the arm measures 6" overall length. In many jurisdictions this product or similar products are required by law.
WI9920LMT -
Truth Split Arm Operator 30905
Truth Split Arm Operator 30905
Common number found on this operator is 30905, which is found on the linkage arm, along with 45035 on the body, 40351 and 40352 on the arms. Also known as a TH-24174, TH-24175, TH-24176, and TH-24177. Replaces the TH-24018, TH-24019, TH-24020 and TH-24021.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.
Left hand shown.
Window Operator Handing
Color Chart
WI1518 -
Truth Split Arm Operator 31850
Truth Split Arm Operator 31850
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.
Left hand shown. White and Coppertone only
Common numbers found on this operator is 31850
Window Operator Handing
Color Chart
WI1530 -
Truth Maxim Dyad Operator
The Truth 50.50 Dyad Window Operator was Manufactured from 1999 to 2019. It was also known as a TH-24082, TH-24083, TH-24182, or TH-24183. We are now shipping the Wi5060 as a replacement with matching color Encore Handle and Cover 12614/12616.
We sometimes find the number 31876 stamped on this operator.
Window Operator Handing
Color Chart
WI5050 -
Truth Operator 13-1/2"
Truth Operator 13-1/2"
Truth Single Arm Window Operator. This new style replaces the older traditional size shown in the diagrams.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
We sometimes find 45251 cast on the housing, and 40051 and 40052 stamped on the arm
Left hand shown. The Wi11454 handle in matching color is included with the operator.
Window Operator Handing
Color Chart
WI1532 -
Truth Stainless Steel Casement Hinge 14.80-Most Common
The Truth 14.80 hinge is a Stainless Steel copy of the the most common of the Truth Casement Hinge, the 14.75. The stainless steel track is 10" long, the glide is a plastic coated steel. The most common problem on this hinge is the shoe.
This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
Wi1475SS -
Dual Arm Truth Maxim Operator 50.10
Dual Arm Truth Maxim Operator 50.10
The Truth 50.10 Maxim Dual Arm is one of the more popular new style operators. This operator is the same as the 50.00, but without the painted steel cover riveted to it. Some numbers we find on this operator are 41011 and 31876.
Left Hand Operator shown in picture.
WI5010 -
Truth Casement 14" Hinge 14.17 30986
Truth 14.17 Casement Hinge-Pair
The 14.17 is not that popular of a hinge. But if your track measures 14" than this is probably what you have. The hinge has a stack height of 7/16". The outside screw holes measure 12-3/8" on center. We sometimes find the number 30986 on the arm and 41498 and 41499 on the stainless steel track.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
Wi1417