Search results for: '30841+lever+operator+for+jeld+week+asement+window'
- Did you mean
- 30841 lever operator for jeld when asement window 0
-
Truth Hole Two Cam Handle 1-1/2" W Ring Pull Offset
The Truth Hole Two Cam Handle 1-1/2" W Ring Pull Offset is considered an off set handle, because the mounting holes are off set with the axis of rotation of the cam handle. This is a very popular handle that has only been around since the 1970's. It is die cast metal that is then powder coat painted.
Right Hand Shown in picture.
Truth part # 25.70.03.xxx
T265 -
Truth 41157 Plastic Tie Bar Guide
Truth 41157 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi41157 -
Truth 45141 Plastic Tie Bar Guide
Truth 45141 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi45141 -
Truth 45145 Plastic Tie Bar Guide
Truth 45145 Plastic Tie Bar Guide
This nylon or plastic guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Wi45145 -
Truth Window Lock 16.16
Truth 16.16 Sash Lock.
3" x 2-9/16" x 1", with 2-3/8" hole spacing
This sash lock has been discontinued. If you order this part, the 16.27 will be sent as a replacement. According to the factory, the Wi1627 will work as a replacement with any modification.
Used truth keeper # Wi20034
WI1616 -
Truth Casement Hinge 14.75 -Sold In Pairs 30744
The Truth 14.75 hinge is the most common of the Truth Casement Hinges. The stainless steel track is 10" long, the glide is a plastic coated steel. The most common problem on this hinge is the shoe. When the hinge is installed incorrectly or not maintained the shoe could pull out the window track. Common numbers found on this hinge are 30744B, 31133C, 40942 and 40941.
This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
WI1475 -
-
Truth 14" Awning Hinge 13.14 30128 30127
Truth 13.14 Awning Window Hinge.
The track measures 14" long, and is 11-16" wide. The stack height is 1/2". The arm marked 30128 is 6-3/4" long. And the arm stamped 30127 is 8" long. This hinge is constructed of steel that is powder coated in a tanish gray color. The common numbers found stamped on this hinge are 30128 and 30127
Sold in pairs
WI1314 -
Truth Casement 14" Hinge 14.17 30986
Truth 14.17 Casement Hinge-Pair
The 14.17 is not that popular of a hinge. But if your track measures 14" than this is probably what you have. The hinge has a stack height of 7/16". The outside screw holes measure 12-3/8" on center. We sometimes find the number 30986 on the arm and 41498 and 41499 on the stainless steel track.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
Wi1417 -
Truth Casement Limit Device 99.20
The Truth Casement Limit Device 99.20 is designed to stop the window from opening too far, and prevent people from falling out of an elevated window. The device is constructed of stainless steel and steel. The Track measures 4-5/8" long, while the arm measures 6" overall length. In many jurisdictions this product or similar products are required by law.
WI9920LMT -
Truth Two Hole Cam Handle 1-1/2" Inline
The Truth Two Hole Cam Handle 1-1/2" Inline has a die cast construction with a powder coated paint finish. It features an 1-1/2" hole spacing. We find the numbers 45086 on the right hand handles, and 45085 on the left hand handles. This handle is very popular on aluminum framed commercial windows due to its low cost.
The handle shown in the picture is a Right Hand.
Color Chart
T268 -
Truth Two Hole Cam Handle 1-1/2" W/Ring Pull
The Truth Two Hole Cam Handle 1-1/2" W/Ring Pull is considered an In Line handle, because the mounting holes line up with the axis of rotation of the cam handle. This is a very popular handle that has only been around since the 1970's. It is die cast metal that is then powder coat painted.
Left Hand Shown in picture.
T264 -
Truth Stainless Steel Casement Hinge 14.80-Most Common
The Truth 14.80 hinge is a Stainless Steel copy of the the most common of the Truth Casement Hinge, the 14.75. The stainless steel track is 10" long, the glide is a plastic coated steel. The most common problem on this hinge is the shoe.
This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
Wi1475SS