Search results for: '31538+window+hing'
-
4 Bar Window Hinge A. W. Anderberg 301ST
A.W. Anderberg 301ST Cadnium Plated Steel HInge
Usually used on commercial hopper windows. If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges. This hinge has been discontinued, and is replaced by the 301SS hinge, which has the same hole spacing, length, and stack height.
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301ST-XX -
4 Bar Window Hinge A.W. Anderberg 77AL
A.W. Anderberg 77AL 4 Bar Window HInge, Aluminum Construction
29/32" track wide x 11/16" stack height
Found in commercial aluminum framed hopper windows.
10", 12" and 14" only, if you have an older larger size, please use the A.W. Anderberg 301ST or A.W. Anderberg 301SS as a replacement. You might have to shim the tracks in these cases, because the stack height is lower on the steel and stainless steel hinges. A.W. Anderberg no longer makes the larger sizes of the Aluminum Hinges due to the brittle nature of aluminum.
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
6-20-2012 No longer manufactured, what we have in stock, is what we have. You will have to replace with 301ST or 301SS Hinges
77AL-XX -
4 Bar Window Hinge 16" Pair
This 16" track length 4 bar hinge is made by Securistyle. The hinge measures 16" long by .906" wide with a .625" stack height
Sold in pairs, one left and one right
Stainless Steel Construction
Sometimes known as the Securi-Style Hinge or Storm Hinge, and replaced the Defender Series
Securistyle part # 851-092-8046
WH116 -
4 Bar Window Hinge A.W. Anderberg 301SS
A.W. Anderberg 301SS 4 Bar Window Hinge, with stainless steel construction.
Usually found on commercial aluminum framed windows.
If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges
29/32" wide x 5/8" stack height
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
301SS-XX -
4 Bar Window Hinge A.W. Anderberg 201SS
A.W. Anderberg 201SS 4 bar window hinge, stainless steel construction.
Usually found on light commercial or residential buildings with hopper windows.
23/32" track width x 1/2" stack height.
If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.
Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.
201SS-XX -
Defender 12” Window Hinge | Securistyle Hinges
Securistyle Defender 12” Window Hinge
This hinge is used on aluminum, vinyl and wood windows. They are fitted with a unique plastic raiser block which guarantees a sure fit. This hinge is 12” long, has a 1/2” stack height and measures 11/16” wide and is constructed of Stainless Steel. We sometimes see Securistyle or made in the UK stamped on the hinge.
Sold in Pairs
WH112 -
4 Bar Window Hinge A.W. Anderberg 201ST
A.W. Anderberg 201ST 4 bar window hinge, cadmium plated steel construction.
Usually found on light commercial or residential buildings with hopper windows. This hinge is being discontinued, and replaced by the 201SS Hinge, which has the same hole spacing, length, and stack height.
23/32" track width x 1/2" stack height.
If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.
Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.
201ST-XX -
-
4 Bar Window Hinge A.W. Anderberg 301AL
A.W. Anderberg 301AL 4 Bar Window HInge, aluminum construction.
29/32" width x 5/8" stack height
Found in commercial aluminum framed hopper windows.
10" and 12" only, if you have an older larger size, please use the A.W. Anderberg 301ST or A.W. Anderberg 301SS as a replacement. You might have to shim the tracks in these cases, because the stack height is lower on the steel and stainless steel hinges. A.W. Anderberg no longer makes the larger sizes of the Aluminum Hinges due to the brittle nature of aluminum.
Sold individually, we recommend changing both hinges with you are replacing the hinge.
6-20-2012 No longer manufactured, what we have in stock, is what we have. You will have to replace with 301ST or 301SS Hinges
301AL-XX -
Truth Stainless Steel Casement Hinge 14.80-Most Common
The Truth 14.80 hinge is a Stainless Steel copy of the the most common of the Truth Casement Hinge, the 14.75. The stainless steel track is 10" long, the glide is a plastic coated steel. The most common problem on this hinge is the shoe.
This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
Wi1475SS -
4 Bar Window Hinge 22" Pair
This 22" track length 4 bar hinge is made by Securistyle. The track measures 22" long by .906" wide, with a stack height of .625".
Stainless Steel Construction
Sometimes known as the Securi-Style Hinge or Storm Hinge, and replaced the Defender Series
Sold in Pairs, one right and one left
Securistyle part # 851-094-8046
WH122 -
Truth Egress Window Hinge 14.77
Truth 14.77 Egress Casement window hinge. This hinge does the same thing as the Wi1475, but the window only travels 2-9/16" into the opening. This hinge is designed to meet Building Egress Code Requirements.
Common numbers found on this hinge are 30463, 30818, 40942 and 40941
Sold in pairs (top and bottom)
Wi1477 -
Securistyle Defender 10” Window Hinge
Securistyle Defender 10” Window Hinge
This hinge is used on aluminum, vinyl and wood windows. They are fitted with a unique plastic raiser block which guarantees a sure fit. This hinge is 10” long, has a 1/2” stack height and measures 11/16” wide and is constructed of Stainless Steel. We sometimes see Securistyle or made in the UK stamped on the hinge.
Sold in Pairs
WH110DE -
Truth Casement Hinge 14.75 -Sold In Pairs 30744
The Truth 14.75 hinge is the most common of the Truth Casement Hinges. The stainless steel track is 10" long, the glide is a plastic coated steel. The most common problem on this hinge is the shoe. When the hinge is installed incorrectly or not maintained the shoe could pull out the window track. Common numbers found on this hinge are 30744B, 31133C, 40942 and 40941.
This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
WI1475 -
Truth Casement 14" Hinge 14.17 30986
Truth 14.17 Casement Hinge-Pair
The 14.17 is not that popular of a hinge. But if your track measures 14" than this is probably what you have. The hinge has a stack height of 7/16". The outside screw holes measure 12-3/8" on center. We sometimes find the number 30986 on the arm and 41498 and 41499 on the stainless steel track.
This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.
Wi1417 -
Truth 14" Awning Hinge 13.14 30128 30127
Truth 13.14 Awning Window Hinge.
The track measures 14" long, and is 11-16" wide. The stack height is 1/2". The arm marked 30128 is 6-3/4" long. And the arm stamped 30127 is 8" long. This hinge is constructed of steel that is powder coated in a tanish gray color. The common numbers found stamped on this hinge are 30128 and 30127
Sold in pairs
WI1314 -
Truth Entrygard Operator 20755
Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755. Call or email for quantity "Discount Codes".
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
3-3/4" link dimension, offset up. For offset down order Wi1520
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.PART # HAND
WI1516R RIGHT HAND-Shown Below
WI1516L LEFT HAND-Shown BelowWI1516 -
Truth Entrygard Operator (20755 On Bottom Of Linkage Arm)
Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the bottom of the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755. Call or email for quantity "Discount Codes".
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
3-3/4" link dimension, offset down. For offset up order Wi1516
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.Left hand shown.
PART # HAND
WI1520R RIGHT HAND-Shown Below
WI1520L LEFT HAND-Shown BelowWI1520 -
Truth Entrygard Operator 20748
Truth Entrygard Dual Arm Operator. We would expect you to find 20748 on the linkage arm, which measures 2-7/8" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20748. Call or email for quantity "Discount Codes".
2-7/8" linkage dimension, off set up.
Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Left hand shown in main picture.
PART # HAND
WI1515R RIGHT HAND-Shown Below
WI1515L LEFT HAND-Shown BelowWI1515- -
4 Bar Window 10" Pair
This 10" track length 4 bar hinge is made by Securistyle. The track measures 10" long by .906" wide with a .625" stack height
Sold in Pairs, one left and one right
Stainless Steel Construction
Sometimes known as the Securi-Style Hinge or Storm Hinge, and replaced the Senator Series
Securistyle part # 851-090-8046
WH110 -
Truth Entrygard Operator 20810
Truth Entrygard Dual Arm Operator. We would expect you to find 20810 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Also known as a TH-23076 or TH-23077.
4-7/16" link dimension, offset up. For offset down, order Wi1561.
Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.MOST POPULAR SIZE
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
PART # HAND
WI1510R RIGHT HAND-Shown Below
WI1510L LEFT HAND-Shown BelowWI1510 -
Two Hole 1-1/2" Wedgeless Cam Handle
Two Hole 1-1/2" Wedgeless Cam Handle
Hinged flap rolls down and locks the window shut. We find this window handle is used alot in the western states. The older version had a 1-3/8" hole spacing, but the new one has 1-1/2" hole spacing.
Sometimes we find the number R and 1 on the flap and DISCO cast in on the back of the handle.
White only!
Wi32552- -
Truth Entrygard Operator Offset Down 20810 Or 20544
Truth Entrygard Dual Arm Operator. We would expect you to find 20810 or 20544 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Call or email for quantity "Discount Codes".
For offset up, order Wi1510.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
PART # HAND
WI1561R RIGHT HAND-Shown Below
WI1561L LEFT HAND-Shown BelowWI1561-