Search results for: '30841+lever+operator+for+jeld+when+craft+window'

Truth 10.11 Lever Operator Double Pull Less Than 2"

Handle assembly projects less than 2"

Truth 10.11 Lever Window Operator Double Pull More Than 2"

Handle assembly projects more than 2"

Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755.  Call or email for quantity "Discount Codes".

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

3-3/4" link dimension, offset up. For offset down order Wi1520

Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

PART # HAND

WI1516R RIGHT HAND-Shown Below

WI1516L LEFT HAND-Shown Below

Truth 10.10 Lever Operator Single Pull Less Than 2"

Less than 2" projection.

Attaches to window at one point.

Includes sash hook.

Truth 10.10 Lever Operator Single Pull More than 2"

More than 2" projection.

Attaches to window at one point.

Includes sash hook.

Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the bottom of the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755.  Call or email for quantity "Discount Codes".

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

3-3/4" link dimension, offset down. For offset up order Wi1516

Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

Left hand shown.

PART # HAND

WI1520R RIGHT HAND-Shown Below

WI1520L LEFT HAND-Shown Below

Truth Entrygard Dual Arm Operator. We would expect you to find 20748 on the linkage arm, which measures 2-7/8" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20748.  Call or email for quantity "Discount Codes".

2-7/8" linkage dimension, off set up.

Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

Left hand shown in main picture.

PART # HAND
WI1515R RIGHT HAND-Shown Below

WI1515L LEFT HAND-Shown Below

The Roto Folding Handle for Pro Drive Operators features die cast construction, and powder coated finish.   The hex is 5/16", and the handle has a overall length of 4-1/4".

Truth Entrygard Dual Arm Operator. We would expect you to find 20810 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Also known as a TH-23076 or TH-23077.

4-7/16" link dimension, offset up. For offset down, order Wi1561.

Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

MOST POPULAR SIZE

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

PART # HAND

WI1510R RIGHT HAND-Shown Below

WI1510L LEFT HAND-Shown Below

Sweep Lock for Aluminum Windows

Made die cast metal, unfinished. Lock measures 1-5/8" x 15/16" x 3/8" projection. Available in left and right versions, the Right Hand version is shown in the picture. This lock is found on aluminum framed windows. Ships with Latch and Nylon Bushing, the screw is not included.

Truth Window Operator 59.05 Split Arm

This operator is sometimes a replacement for the Wright Split Arm Operator.

White and Gold only

Common number found on this part is 21550
On the Wright Window Operator we might find a 07900 stamped on the arm.

Window Operator Handing

Color Chart

Peachtree Window Operator Handle for the Wi9009834, available in White or Driftwood.

Truth 11.16 Awning Operator 24-3/4"

24-3/4" spread when in the closed position. We sometime find 45301 cast in the housing.

The Wi11454 handle in matching color is included with the operator.

Color Chart

Truth Entrygard Dual Arm Operator. We would expect you to find 20810 or 20544 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544.  Call or email for quantity "Discount Codes".

For offset up, order Wi1510.

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

PART # HAND
WI1561R RIGHT HAND-Shown Below

WI1561L LEFT HAND-Shown Below

The Truth 22.18 Front Mount Awning Operator spreads 20-1/8 inches pin to pin on the arms when it is in the closed position. The Front Mount hole spaceing is 7 inches on the outside holes and 6 1/8 inches on the inside holes.

Vent Arm Operator 18"

Replacement vent arm Operator.

This product is usually used in aluminum frame windows.

The package includes 18" vent arm, handle loop, and all brackets shown in the diagram.

Replacement Hope's Window Operator.

Die cast construction with steel arm. The arm measures 9-1/2" long for the roller to the center of the housing.

Truth Entrygard Awning Operator 11.42

Numbers usually found on this operator are 31545

arms measure 12" across when in the closed postition

Truth part # 11.42.00.001

The Truth Skylight Operator-Straight Drive-4275 is easy to install on wood, metal or vinyl skylights. Gear reduction provides needed lift for sash weights up to 140 lbs. Steel chain is detachable at the sash for easy maintenance. The housing measures 2-3/4" wide by 10-3/4" long with a thickness of 7/8". We find the number 40966 on the back cover.

The Split Arm Roto Operator has been around for the past 10-15 years.  The housing is 4-1/2" wide, and the linkage arm has an overall length of 4-3/8".  One of the most recognizable features of this mechanism is the female hex fitting for the handle.

Right Hand shown in the picture

Truth Entrygard Operator 40575 Or 40574

Common numbers found on the older version of this operator are 40575 for the right hand operator, and 40574 for the left hand operator

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

Left hand shown.

Window Operator Handing

The Truth Skylight Operator-Angle Drive 4265 is easy to install on wood, metal or vinyl skylights. Gear reduction provides needed lift for sash weights up to 140 lbs. Steel chain is detachable at the sash for easy maintenance. The housing measures 2-3/4" wide by 10-3/4" long with a thickness of 7/8". We find the number 40966 stamped on the back cover.

Truth Entrygard Operator 20544

Common numbers found on this operator are 30636, 30637, and 20544 for the old style,
31368, 20810, and 45275 for the new style. Also known as a TH-23078 and TH-23079.

For link off-set up version order Wi1562

See attached file of what the Original Version looked like

Left hand shown.

Window Operator Handing

Truth Entrygard 11.43 Awning Operator 31545

Arms are 8-3/8" long, and measures 20-3/4" across when the arms are in the closed position.

Awing Operator, we usually find 31545 stamped on the arm, they used to be a cadmium plated steel, now they are powder coated. We also find 21221 on it.

Vent Arm Window Operator 12"

This product is usually used in aluminum frame windows.

The package includes 12" vent arm, handle loop, and all brackets shown in the diagram.

Truth Entrygard Awning Operator 11.44 21221

Arms are 13-3/8" long, and the span of the arms when in the closed position, arms opposing each other, is 28-1/8" (Hole to Hole)

Awing Operator, we usually find 40759, 40760, and 21221 stamped on the arms, they used to be a cadmium plated steel, now they are powder coated.

Truth 22.10 Awning Operator 24-7/8"

Surface mounted Truth Awning Window Operator. The arms span 24-7/8" when in the closed postion. The mounting screws are 7" on center on the outside screw holes and 6" on center on the inside holes. Plastic Glides are not available separately, they are riveted in place. The only number we have found on this operator is a UK Pat # 2135397

Truth Part # 22.10

Vent Arm Operator 10"

Replacement vent arm Operator.

This product is usually used in aluminum frame windows.

The package includes 10" vent arm, handle loop, and all brackets shown in the diagram.

Truth 51.00 Maxim Awning Operator 41013 41016 Manufactured since 1999 until May 2019. We have a few of them left, but if we do not we will be shipping the Wi5110, and will ship a matching cover and handle with it.

14-1/2" spread when in the closed position. We sometimes find the numbers 31881, 41013 and 41016 stamped on the underside of the 12" long arms. Ships with matching handle.

As of 7-30-2019 we are out of the 5100's, and will be shipping the Wi5110 with Wi21614 Folding Handle and Cover

Color Chart

Truth 11.30 Awning Operator 11-3/8"

11-3/8" spread when in closed position.

Includes sash hook and matching handle..

Color Chart

The Truth-Wright Split Arm Operator is a replacement for the older Wright Operators.  Linkage arm has an overall length of 3-5/8".

Left Hand Shown in Picture, we can only get these in white.

Truth Window Operator 15.59

Same as the Wi1531 but with Metal 9/16" roller. Ships with matching handle.

Color Chart

Window Operator Handing

Casement Window Operator 9" Arm

Replacement Casement Window Operator is made of a die cast housing and steel arm. The window operator housing has 4 mounting holes, 4-3/4" are the outside dimensions of the outside screws and 3-7/8" on the inside screws.

Right Hand Operator Shown in picture

Handing Diagram

The Truth 51.10 Encore Awning Operator is used on windows that open from the bottom and swing out, like a one piece garage door. When in the closed position, the arms have an approximate length of 15 inches. The housing is constructed of die cast metal, and arms are steel. The complete assembly is electro statically painted. The operator ships with the 31879 detach clip, but does not include the 11647 Maxim Slide Shoe. The slide shoe is the piece that slides in the track at the bottom of the window. A common number we find on this operator is 41013.

5/16" Spline Window Operator T Handle.

Replace regular crank handles with this compact T handle. Also known as a Butterfly Handle.

The Truth Casement Handle Aluminum-2-3/8" is used on many aluminum windows manufactured from the 1970's.  This handle is the same as the Wi2423, but the lock up dimension is 3/8".  The lock up dimension is the distance from the back of the handle mounting plate to the inside surface of the hook when it is closed.  The handle features die cast construction, and is then powder coated to the desired finish.  Aluminum and white in stock, call for other colors.