Search results for: '30841+lever+operator+for+jeld+week+coat+window'
- Did you mean
- 30841 lever operator for jeld week clai window 0
- 30841 lever operator for jeld week clay window 0
- 30841 lever operator for jeld when coat window 0
-
Truth Entrygard Operator 20755
Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755. Call or email for quantity "Discount Codes".
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
3-3/4" link dimension, offset up. For offset down order Wi1520
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.PART # HAND
WI1516R RIGHT HAND-Shown Below
WI1516L LEFT HAND-Shown BelowWI1516 -
Truth Entrygard Operator (20755 On Bottom Of Linkage Arm)
Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the bottom of the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755. Call or email for quantity "Discount Codes".
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
3-3/4" link dimension, offset down. For offset up order Wi1516
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.Left hand shown.
PART # HAND
WI1520R RIGHT HAND-Shown Below
WI1520L LEFT HAND-Shown BelowWI1520 -
Sweep Latch for Aluminum Windows
Sweep Lock for Aluminum Windows
Made die cast metal, unfinished. Lock measures 1-5/8" x 15/16" x 3/8" projection. Available in left and right versions, the Right Hand version is shown in the picture. This lock is found on aluminum framed windows. Ships with Latch and Nylon Bushing, the screw is not included.
SL4428- -
Truth Entrygard Operator 20748
Truth Entrygard Dual Arm Operator. We would expect you to find 20748 on the linkage arm, which measures 2-7/8" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20748. Call or email for quantity "Discount Codes".
2-7/8" linkage dimension, off set up.
Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Left hand shown in main picture.
PART # HAND
WI1515R RIGHT HAND-Shown Below
WI1515L LEFT HAND-Shown BelowWI1515- -
Truth Window Operator 59.05 Split Arm
Truth Window Operator 59.05 Split Arm
This operator is sometimes a replacement for the Wright Split Arm Operator.
White and Gold only
Common number found on this part is 21550
On the Wright Window Operator we might find a 07900 stamped on the arm.Window Operator Handing
Color Chart
WI5905 -
Truth Entrygard Operator Offset Down 20810 Or 20544
Truth Entrygard Dual Arm Operator. We would expect you to find 20810 or 20544 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Call or email for quantity "Discount Codes".
For offset up, order Wi1510.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
PART # HAND
WI1561R RIGHT HAND-Shown Below
WI1561L LEFT HAND-Shown BelowWI1561- -
Window Handle Angle Base 1-3/8" Truth
Angle Base 1-3/8" Window Handle Truth
Also known as the Truth 25.39, this handle is constructed of a die cast metal and powder coated to the desired color. The distance between the screws is 1-3/8" on center. The handle measures 3-3/4" long, base measures 2-1/8" long. The number found on the handle is 45086 for the Right Hand, and 45085 for the Left Hand. We also find U.S. Pat. # 4,930,820
Right Hand is shown in picture.
T266- -
Truth Entrygard Operator 20810
Truth Entrygard Dual Arm Operator. We would expect you to find 20810 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Also known as a TH-23076 or TH-23077.
4-7/16" link dimension, offset up. For offset down, order Wi1561.
Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.MOST POPULAR SIZE
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
PART # HAND
WI1510R RIGHT HAND-Shown Below
WI1510L LEFT HAND-Shown BelowWI1510 -
Fenestra Window Operator 3-1/4"
The Fenestra Window Operator 3-1/4" is a replica of a version made in the 1920's to 1950's. This version is made of a die cast material, that is then powder coated in an aluminum finish. If you want bronze color, your best bet is to purchase some bronze spray paint and paint them. Ships with mounting screws and handle.
Left hand shown in pictureHanding Diagram
RO727- -
Truth Skylight Operator-Straight Drive-42.75
The Truth Skylight Operator-Straight Drive-4275 is easy to install on wood, metal or vinyl skylights. Gear reduction provides needed lift for sash weights up to 140 lbs. Steel chain is detachable at the sash for easy maintenance. The housing measures 2-3/4" wide by 10-3/4" long with a thickness of 7/8". We find the number 40966 on the back cover.
wi4275- -
Split Arm Roto Operator
The Split Arm Roto Operator has been around for the past 10-15 years. The housing is 4-1/2" wide, and the linkage arm has an overall length of 4-3/8". One of the most recognizable features of this mechanism is the female hex fitting for the handle.
Right Hand shown in the picture
Wi21339- -
Truth Entrygard 11.43 Awning Operator 31545
Truth Entrygard 11.43 Awning Operator 31545
Arms are 8-3/8" long, and measures 20-3/4" across when the arms are in the closed position.
Awing Operator, we usually find 31545 stamped on the arm, they used to be a cadmium plated steel, now they are powder coated. We also find 21221 on it.
WI1143 -
Truth Entrygard Awning Operator 11.44 21221
Truth Entrygard Awning Operator 11.44 21221
Arms are 13-3/8" long, and the span of the arms when in the closed position, arms opposing each other, is 28-1/8" (Hole to Hole)
Awing Operator, we usually find 40759, 40760, and 21221 stamped on the arms, they used to be a cadmium plated steel, now they are powder coated.
WI1144 -
Project In Truth Handle-1-1/2" -7/16" Lock Up
The Project In Truth Handle-1-1/2" -7/16" Lock Up is a handle we have seen since the 1970's. This window handle features a 1-1/2" hole spacing on centers with a 7/16" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. It is used on Project In or Thru Rail Hopper style windows. We stock the Bronze color, but other colors are available, call for more information.
Right hand handle is shown in the picture.
P2731 -
Truth Entrygard Operator 40575 Or 40574
Truth Entrygard Operator 40575 Or 40574
Common numbers found on the older version of this operator are 40575 for the right hand operator, and 40574 for the left hand operator
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Left hand shown.
Window Operator Handing
WI1594 -
Truth Skylight Operator-Angle Drive 42.65
The Truth Skylight Operator-Angle Drive 4265 is easy to install on wood, metal or vinyl skylights. Gear reduction provides needed lift for sash weights up to 140 lbs. Steel chain is detachable at the sash for easy maintenance. The housing measures 2-3/4" wide by 10-3/4" long with a thickness of 7/8". We find the number 40966 stamped on the back cover.
Wi4265- -
Truth Casement Handle Aluminum-2-3/8"
The Truth Casement Handle Aluminum-2-3/8" is used on many aluminum windows manufactured from the 1970's. This handle is the same as the Wi2423, but the lock up dimension is 3/8". The lock up dimension is the distance from the back of the handle mounting plate to the inside surface of the hook when it is closed. The handle features die cast construction, and is then powder coated to the desired finish. Aluminum and white in stock, call for other colors.
C1729-- -
Truth Entrygard Operator 20544
Truth Entrygard Operator 20544
Common numbers found on this operator are 30636, 30637, and 20544 for the old style,
31368, 20810, and 45275 for the new style. Also known as a TH-23078 and TH-23079.For link off-set up version order Wi1562
See attached file of what the Original Version looked like
Left hand shown.
Window Operator Handing
WI1511 -
Casement Window Operator 9" Arm
Casement Window Operator 9" Arm
Replacement Casement Window Operator is made of a die cast housing and steel arm. The window operator housing has 4 mounting holes, 4-3/4" are the outside dimensions of the outside screws and 3-7/8" on the inside screws.
Right Hand Operator Shown in picture
Handing Diagram
RO392 -
Project In Truth Handle-1-1/2"- 1/2" Lock Up
The Project In Truth Handle-1-1/2"- 1/2" Lock Up is a handle we have seen since the 1970's. This window handle features a 1-1/2" hole spacing on centers with a 1/2" lock up dimension. The window handle is constructed of a die cast material that is then powder coated to the finish of your choice. We find it used on Project In or Thru Rail type Hopper windows. We stock the Bronze color, but other colors are available, call for more information.
Right Hand handle shown in picture.
P2732 -
Two Hole Cam Handle 1-1/2" Plastic Window Handle
The Two Hole Cam Handle 1-1/2" Plastic Window Handle is constructed of high density plastic. The mounting hole spacing is an 1-1/2". The lock up dimension is 3/8". The base measures 2-1/8" x 7/8". The handle measures 3-1/2" long. We seem to only find this handle on basement egress window in residential environments.
The white is in stock, the beige has a 1-3 week lead time.
Wi32403- -
Truth Entrygard Dyad Operator 20810
Truth Entrygard Dyad Operator 20810. The 15.62 is no longer manufactured, we can not get the Right Hand anymore, but have a decent supply of Left Hand's.
Same as the Wi1511, but linkage arm is off set up
Linkage arm stamped 20810A, gear stamped 31367L, base stamped 45108
4-7/16" link dimension, offset up. For offset down, order Wi1511.
Window Operator Handing
Wi1562