Search results for: '30841+lever+operator+for+jeld+week+chang+window'
- Did you mean
- 30841 lever operator for jeld week crank window 0
- 30841 lever operator for jeld when chang window 0
-
Truth Entrygard Operator 20755
Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755. Call or email for quantity "Discount Codes".
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
3-3/4" link dimension, offset up. For offset down order Wi1520
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.PART # HAND
WI1516R RIGHT HAND-Shown Below
WI1516L LEFT HAND-Shown BelowWI1516 -
Truth Entrygard Operator (20755 On Bottom Of Linkage Arm)
Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the bottom of the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755. Call or email for quantity "Discount Codes".
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
3-3/4" link dimension, offset down. For offset up order Wi1516
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.Left hand shown.
PART # HAND
WI1520R RIGHT HAND-Shown Below
WI1520L LEFT HAND-Shown BelowWI1520 -
Sweep Latch for Aluminum Windows
Sweep Lock for Aluminum Windows
Made die cast metal, unfinished. Lock measures 1-5/8" x 15/16" x 3/8" projection. Available in left and right versions, the Right Hand version is shown in the picture. This lock is found on aluminum framed windows. Ships with Latch and Nylon Bushing, the screw is not included.
SL4428- -
Truth Entrygard Operator 20748
Truth Entrygard Dual Arm Operator. We would expect you to find 20748 on the linkage arm, which measures 2-7/8" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20748. Call or email for quantity "Discount Codes".
2-7/8" linkage dimension, off set up.
Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Left hand shown in main picture.
PART # HAND
WI1515R RIGHT HAND-Shown Below
WI1515L LEFT HAND-Shown BelowWI1515- -
Truth Window Operator 59.05 Split Arm
Truth Window Operator 59.05 Split Arm
This operator is sometimes a replacement for the Wright Split Arm Operator.
White and Gold only
Common number found on this part is 21550
On the Wright Window Operator we might find a 07900 stamped on the arm.Window Operator Handing
Color Chart
WI5905 -
Truth Entrygard Operator Offset Down 20810 Or 20544
Truth Entrygard Dual Arm Operator. We would expect you to find 20810 or 20544 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Call or email for quantity "Discount Codes".
For offset up, order Wi1510.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
PART # HAND
WI1561R RIGHT HAND-Shown Below
WI1561L LEFT HAND-Shown BelowWI1561- -
Truth Entrygard Operator 20810
Truth Entrygard Dual Arm Operator. We would expect you to find 20810 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Also known as a TH-23076 or TH-23077.
4-7/16" link dimension, offset up. For offset down, order Wi1561.
Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.MOST POPULAR SIZE
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
PART # HAND
WI1510R RIGHT HAND-Shown Below
WI1510L LEFT HAND-Shown BelowWI1510 -
Truth Skylight Operator-Straight Drive-42.75
The Truth Skylight Operator-Straight Drive-4275 is easy to install on wood, metal or vinyl skylights. Gear reduction provides needed lift for sash weights up to 140 lbs. Steel chain is detachable at the sash for easy maintenance. The housing measures 2-3/4" wide by 10-3/4" long with a thickness of 7/8". We find the number 40966 on the back cover.
wi4275- -
Split Arm Roto Operator
The Split Arm Roto Operator has been around for the past 10-15 years. The housing is 4-1/2" wide, and the linkage arm has an overall length of 4-3/8". One of the most recognizable features of this mechanism is the female hex fitting for the handle.
Right Hand shown in the picture
Wi21339- -
Truth Entrygard Operator 40575 Or 40574
Truth Entrygard Operator 40575 Or 40574
Common numbers found on the older version of this operator are 40575 for the right hand operator, and 40574 for the left hand operator
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Left hand shown.
Window Operator Handing
WI1594 -
Truth Skylight Operator-Angle Drive 42.65
The Truth Skylight Operator-Angle Drive 4265 is easy to install on wood, metal or vinyl skylights. Gear reduction provides needed lift for sash weights up to 140 lbs. Steel chain is detachable at the sash for easy maintenance. The housing measures 2-3/4" wide by 10-3/4" long with a thickness of 7/8". We find the number 40966 stamped on the back cover.
Wi4265- -
Truth Entrygard Operator 20544
Truth Entrygard Operator 20544
Common numbers found on this operator are 30636, 30637, and 20544 for the old style,
31368, 20810, and 45275 for the new style. Also known as a TH-23078 and TH-23079.For link off-set up version order Wi1562
See attached file of what the Original Version looked like
Left hand shown.
Window Operator Handing
WI1511 -
Casement Window Operator 9" Arm
Casement Window Operator 9" Arm
Replacement Casement Window Operator is made of a die cast housing and steel arm. The window operator housing has 4 mounting holes, 4-3/4" are the outside dimensions of the outside screws and 3-7/8" on the inside screws.
Right Hand Operator Shown in picture
Handing Diagram
RO392 -
4 Bar Window Hinge A.W. Anderberg 201SS
A.W. Anderberg 201SS 4 bar window hinge, stainless steel construction.
Usually found on light commercial or residential buildings with hopper windows.
23/32" track width x 1/2" stack height.
If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.
Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.
201SS-XX -
Two Hole Cam Handle 1-1/2" Plastic Window Handle
The Two Hole Cam Handle 1-1/2" Plastic Window Handle is constructed of high density plastic. The mounting hole spacing is an 1-1/2". The lock up dimension is 3/8". The base measures 2-1/8" x 7/8". The handle measures 3-1/2" long. We seem to only find this handle on basement egress window in residential environments.
The white is in stock, the beige has a 1-3 week lead time.
Wi32403- -
Truth Entrygard Dyad Operator 20810
Truth Entrygard Dyad Operator 20810. The 15.62 is no longer manufactured, we can not get the Right Hand anymore, but have a decent supply of Left Hand's.
Same as the Wi1511, but linkage arm is off set up
Linkage arm stamped 20810A, gear stamped 31367L, base stamped 45108
4-7/16" link dimension, offset up. For offset down, order Wi1511.
Window Operator Handing
Wi1562 -
4 Bar Window Hinge A.W. Anderberg 77AL
A.W. Anderberg 77AL 4 Bar Window HInge, Aluminum Construction
29/32" track wide x 11/16" stack height
Found in commercial aluminum framed hopper windows.
10", 12" and 14" only, if you have an older larger size, please use the A.W. Anderberg 301ST or A.W. Anderberg 301SS as a replacement. You might have to shim the tracks in these cases, because the stack height is lower on the steel and stainless steel hinges. A.W. Anderberg no longer makes the larger sizes of the Aluminum Hinges due to the brittle nature of aluminum.
Sold Individually, these hinges are non-handed. We recommend that you change both hinges when replacing.
6-20-2012 No longer manufactured, what we have in stock, is what we have. You will have to replace with 301ST or 301SS Hinges
77AL-XX -
Truth Split Arm Operator 30905
Truth Split Arm Operator 30905
Common number found on this operator is 30905, which is found on the linkage arm, along with 45035 on the body, 40351 and 40352 on the arms. Also known as a TH-24174, TH-24175, TH-24176, and TH-24177. Replaces the TH-24018, TH-24019, TH-24020 and TH-24021.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.
Left hand shown.
Window Operator Handing
Color Chart
WI1518