The Andersen Perma-Shield Split Arm Operator is avialable in the Stone Color. Use the Drop Down Menu to Confirm and the Handing you need. If your window Lock is on the Left, Order the Left Hand.
The Truth 11329 Folding Crank Handle is constructed of die cast metal and plastic. The handle is metal, but the part the mounts on the window spline or shaft is plastic. The handle tilts down to clear blinds and is held in place by a small flat head screw. The only issue we see with this handle is the plastic piece that mounts on the shaft of the operator, this some times strips out, but usually only in rental properties. This handle will work on all Truth Crank Operators, and has an 11/32" spline.
Designed as an integrated system, Encore operators and locks provide unmatched elegance and performance. Encore multi-point locking system provides trouble-free operation with fully concealed locking and sequential engagement, providing the most complete locking system for casement, awning and even round top windows.
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
This plastic clip was used to hold the older version Guide Bar or Track. The piece measures 3/4" wide, by 5/8" high, with an 11/16" projection. The clip is made of plastic.
This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes. The housing is contructed of die case metal that is electro-statically painted. The housing is 5-1/2" wide. The optional handle fits the 5/16" Hex Shaft.
The arm is 9" long and the outside screw spacing is 5-1/4". The inside threaded holes are 4-1/4" apart. Die cast construction with steel arm. Ships with handle and mounting screws.
The Roto Folding Handle for Pro Drive Operators features die cast construction, and powder coated finish. The hex is 5/16", and the handle has a overall length of 4-1/4".
Replacement Hook Adapter for the Telescoping Pole Crank 10638. Hook measures 1" wide, overall length is 2-3/8" including female insert that fits into pole. The insert spline is 11/32" with a 1/2" diameter.
Truth 16.52 Sash Lock. A very common sash lock that tends to fail because the plastic slide breaks due to incorrect installation at the window manufacturer or being forced when there is a obstruction in the window opening. The new replacement model has a thicker plastic slide. Because the slide is thicker, the keeper, part # Wi41268 and Wi41269 might have to be shimmed with small washers. The lock measures 2-5/16" between screws, 2-3/4" high by 2-3/16" deep and 1" thick. Truth did make a Sash Lock that was similar to this one, but was 3-1/2" tall, that model has been discontinued.
Common numbers found on this sash lock are 21328 and 45189
Non handed (can be used on right or left hand windows).
Wi11329
