Window Hinges

The Truth 14.75 hinge is the most common of the Truth Casement Hinges.  The stainless steel track is 10" long, the glide is a plastic coated steel.  The most common problem on this hinge is the shoe.  When the hinge is installed incorrectly or not maintained the shoe could pull out the window track. Common numbers found on this hinge are 30744B, 31133C, 40942 and 40941.

This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.

This hinge is sold in pairs (one top and one bottom).   If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.

Learn More

Truth Anderberg Hinge Key Learn More

Truth 14.77 Egress Casement window hinge.   This hinge does the same thing as the Wi1475, but the window only travels 2-9/16" into the opening.   This hinge is designed to meet Building Egress Code Requirements.

Common numbers found on this hinge are 30463, 30818, 40942 and 40941

Sold in pairs (top and bottom)

Learn More

Truth Window Hinge 14.97 Maxim

Common numbers found on this hinge are 31862, and 31858

This hinge has been manufacturered since 1999

sold in pairs (top and bottom)

Learn More

Truth Window Hinge 14.12 Maxim Egress

Common number found on this hinge are 31861 and 32062

This hinge has been manufacturered since 1999.

Sold in Pairs

Learn More

Truth Awning Window Hinge 13.13

10" Track Length

common number found stamped on this hinge are 30122A, 30121 and 31701

This hinge is sold in pairs, you get a left and right

Learn More

Truth 13.16 Awning Window Hinge.

Sold in Pairs

Learn More

Truth 13.15 Awning Hinge

A common number we find on this hinge is 30132 A, which is located on the arm that attaches to the window.

Sold in Pairs

Learn More

Truth 13.14 Awning Window Hinge.

The track measures 14" long, and is 11-16" wide.  The stack height is 1/2".  The arm marked 30128 is 6-3/4" long. And the arm stamped 30127 is 8" long.  This hinge is constructed of steel that is powder coated in a tanish gray color.  The common numbers found stamped on this hinge are 30128 and 30127

Sold in pairs

Learn More

The Truth 99.20 limiting device, limits the amount of opening of a casement window.

In some locations this is required for all window above the first floor.

Learn More

A.W. Anderberg 77AL 4 Bar Window HInge, Aluminum Construction

29/32" track wide x 11/16" stack height

Found in commercial aluminum framed hopper windows.

10", 12"  and 14" only, if you have an older larger size, please use the A.W. Anderberg 301ST or A.W. Anderberg 301SS as a replacement.  You might have to shim the tracks in these cases, because the stack height is lower on the steel and stainless steel hinges.  A.W. Anderberg no longer makes the larger sizes of the Aluminum Hinges due to the brittle nature of aluminum.

Sold Individually, these hinges are non-handed.  We recommend that you change both hinges when replacing.

6-20-2012   No longer manufactured, what we have in stock, is what we have.   You will have to replace with 301ST or 301SS Hinges

Learn More

A.W. Anderberg 201SS 4 bar window hinge, stainless steel construction.

Usually found on light commercial or residential buildings with hopper windows.

23/32" track width x 1/2" stack height.

If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.

Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.

Learn More

A.W. Anderberg 201ST 4 bar window hinge, cadmium plated steel construction.

Usually found on light commercial or residential buildings with hopper windows.

23/32" track width x 1/2" stack height.

If you have a casement window with a 16" track length, please see 222SS Egress Window Hinge.

Sold individually, these hinges are non handed, we recommend that you change both hinges when you are replacing them.

Learn More

A.W. Anderberg 301AL 4 Bar Window HInge, aluminum construction.

29/32" width x 5/8" stack height

Found in commercial aluminum framed hopper windows.

10" and 12" only, if you have an older larger size, please use the A.W. Anderberg 301ST or A.W. Anderberg 301SS as a replacement.  You might have to shim the tracks in these cases, because the stack height is lower on the steel and stainless steel hinges.  A.W. Anderberg no longer makes the larger sizes of the Aluminum Hinges due to the brittle nature of aluminum.

Sold individually, we recommend changing both hinges with you are replacing the hinge.

6-20-2012   No longer manufactured, what we have in stock, is what we have.   You will have to replace with 301ST or 301SS Hinges

Learn More

A.W. Anderberg 301SS 4 Bar Window Hinge, with stainless steel construction.

Usually found on commercial aluminum framed windows.

If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges

29/32" wide x 5/8" stack height

Sold Individually, these hinges are non-handed.  We recommend that you change both hinges when replacing.

Learn More

A.W. Anderberg 301ST Cadnium Plated Steel HInge

Usually used on commercial hopper windows.  If you have a Casement Window, please see the 222SS or the 333SS Egress Window Hinges

29/32" wide x 5/8" stack height

Sold Individually, these hinges are non-handed.  We recommend that you change both hinges when replacing.

Learn More

Truth 333SS 4 Bar Egress Window HInge.   Used on large casement windows to allow egress from buildings.

16-1/2" long, 29/32" wide.

Sold individually, non handed

A. W. Anderberg/Truth Part # 35.12.00.100

Learn More

Truth/A.W. Anderberg 222SS 4 bar Egress Window Hinge

Used on larger casement windows to provide egress through the window.

Sold individually, these hinges are non handed

Truth/A. W. Anderberg part #35.11.00.102

Learn More

This 22" track length 4 bar hinge is made by Bronze Craft. 

Stainless Steel Construction

Sometimes known as the Securi-Style Hinge or Storm Hinge, and replaced the Defender Series

Sold in Pairs, one right and one left

Bronze Craft part # 851-094-8046

Learn More

This 16" track length 4 bar hinge is made by Bronze Craft. 

Sold in pairs, one left and one right

Stainless Steel Construction

Sometimes known as the Securi-Style Hinge or Storm Hinge, and replaced the Defender Series

Bronze Craft part # 851-092-8046

Learn More